How to remove and install the engine mount on Ford Flex?

The first step to remove the engine mount involves taking off the exhaust flexible pipe. Position a floor jack together with the Oil Pan Holding Fixture under the oil pan making sure the fixture matches with the mounting bosses while maintaining caution against any potential damage. The first step requires removal of the engine coolant degas bottle while the second step involves detaching the wiring harness retainer from the engine mount bracket stud bolt and subsequent removal of the nut and bolt and engine mount brace. After properly removing the four engine mount nuts along with the four engine mount studs it is essential to detach the three bolts and the engine mount from its position. The front cover engine mount stud holes should receive pressurized air cleaning for debris removal before installing the engine mount along with the three bolts while keeping them loose. After cleaning the engine mount studs along with fresh studs apply new thread sealer before screwing in the four engine mount studs which need to be torqued to 20 Nm (177 lb-in). Crank the engine mount bolts which number three to 90 Nm (66 lb-ft) tension while the four engine mount nuts require a torque of 63 Nm (46 lb-ft). The complete installation procedure includes tightening the engine mount brace along with its bolt and nut to 20 Nm (177 lb-in). Subsequently install the wiring harness retainer to the engine mount bracket stud bolt before reattaching the engine coolant degas bottle and the exhaust flexible pipe.

OEM Ford Flex Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mounts found

View related parts
Ford Flex Transmission Mount, Front Upper Part Number: DG1Z-6038-F
$66.30 MSRP: $96.50
You Save: $30.20 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount, Front Upper; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Upper Trans Mount
- Position: Front Upper
- Replaces: DG1Z-6038-D, 8G1Z-6038-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Motor Mount, Front Part Number: DG1Z-6038-E
$107.56 MSRP: $156.57
You Save: $49.01 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount, Front; Engine Mount Bracket; Front Mount; Mount
- Position: Front
- Replaces: DG1Z-6038-C, DG1Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Torque Arm, Front Part Number: DG1Z-6068-A
$55.85 MSRP: $79.90
You Save: $24.05 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Engine Support Rod, Front; Engine Mount Torque Strut; Motor Mount; Torsion Arm
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Torsion Arm, Lower Part Number: 9G1Z-6068-A
$42.16 MSRP: $61.37
You Save: $19.21 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Automatic Transmission Mount, Lower; Engine Support Rod; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Lower Mount; Lower Trans Mount; Transmission Mount
- Position: Lower
- Replaces: 8G1Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Transmission Mount Part Number: GB5Z-6068-A
$49.08 MSRP: $70.22
You Save: $21.14 (31%)
ADD TO CART
Product Specifications
- Other Name: Housing; Engine Support Rod; Engine Mount Torque Strut; Transfer Case Mount; Motor Mount; Torque Arm; Torsion Arm
- Manufacturer Note: Rear
- Replaces: AA5Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Flex | Limited, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Front Mount Part Number: AA5Z-6038-D
$87.95 MSRP: $128.02
You Save: $40.07 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount
- Position: Front
- Replaces: AA5Z-6038-A, AA5Z-6038-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Flex | Limited, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Transmission Mount, Upper Part Number: AA5Z-6038-B
$101.14 MSRP: $147.22
You Save: $46.08 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount, Upper; Transfer Case Mount; Upper Trans Mount
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Flex | Limited, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Front Mount Part Number: 8G1Z-6038-A
$76.38 MSRP: $111.18
You Save: $34.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Insulator
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Mount Bracket, Front Passenger Side Part Number: 8M8Z-6038-A
$63.73 MSRP: $97.90
You Save: $34.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Front Engine Mount Support; Right Engine Mount Bracket; Torque Strut; Motor Mount.; Engine Bracket; Front Mount; Front Mount Bracket; Support; Mount
- Manufacturer Note: Bracket
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Mount Bracket, Upper Part Number: 8G1Z-6031-A
$51.90 MSRP: $74.25
You Save: $22.35 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Automatic Transmission Mount; Transfer Case Mount; Motor Mount; Transmission Mount Bracket; Transmission Mount
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Transmission Mount, Front Lower Part Number: AA5Z-6068-B
$73.58 MSRP: $107.10
You Save: $33.52 (32%)
Product Specifications
- Other Name: Automatic Transmission Mount, Lower; Engine Support Rods; Engine Mounts; Transfer Case Mount; Lower Trans Mount; Torsion Damper
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Flex | Limited, SEL, Titanium | 6 Cyl 3.5 L GAS

Ford Flex Engine Mount

OEM Engine Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Engine Mount with long life and a perfect fit. Come to our website and find genuine Ford Flex parts. We keep a wide inventory of OEM Flex parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Engine Mount is a very important part and is highly reliable and regarded for its efficiency in the performance of the Ford Flex. Used to reduce noise and vibration from the engine and operation and mainly responsible for mounting and supporting the engine and transaxle, this Engine Mount guarantees noiseless and safe driving. Suitable for use in several models of the Ford Flex, it improves vehicle efficiency by ensuring that the engine stays in the ideal position that is significant in determining fuel consumption. The Engine Mount includes traditional metal-to-rubber insulator type, hydraulic fluid filled silicone type, and the newer electronic 'active' type where the stiffness is varied with engine speed. This reduces unnecessary mobility, which also increases comfort and thus adds to creating a safer environment. In the course of time, age, heat and the influence of fluids affect the Engine Mount, thus, constant checking is necessary to avoid sponginess or leakage. The mount P2968 enhances the versatility and interior of the Ford Flex which further generates a greater advantage to ensure that Flex remains the favorite hauler among family, young individuals and many more. The Engine Mount consists of high-quality materials to guarantee optimum performance and features picks-up from other cars in the market as innovations making the Ford Flex a car to rely on.

Ford Flex Engine Mount Parts and Q&A

Mount Bracket, Front Passenger Side
8M8Z-6038-A
Q: How to remove and install the engine mount on Ford Flex?
A:
The first step to remove the engine mount involves taking off the exhaust flexible pipe. Position a floor jack together with the Oil Pan Holding Fixture under the oil pan making sure the fixture matches with the mounting bosses while maintaining caution against any potential damage. The first step requires removal of the engine coolant degas bottle while the second step involves detaching the wiring harness retainer from the engine mount bracket stud bolt and subsequent removal of the nut and bolt and engine mount brace. After properly removing the four engine mount nuts along with the four engine mount studs it is essential to detach the three bolts and the engine mount from its position. The front cover engine mount stud holes should receive pressurized air cleaning for debris removal before installing the engine mount along with the three bolts while keeping them loose. After cleaning the engine mount studs along with fresh studs apply new thread sealer before screwing in the four engine mount studs which need to be torqued to 20 Nm (177 lb-in). Crank the engine mount bolts which number three to 90 Nm (66 lb-ft) tension while the four engine mount nuts require a torque of 63 Nm (46 lb-ft). The complete installation procedure includes tightening the engine mount brace along with its bolt and nut to 20 Nm (177 lb-in). Subsequently install the wiring harness retainer to the engine mount bracket stud bolt before reattaching the engine coolant degas bottle and the exhaust flexible pipe.