How to service and repair the front sway bar link on Ford Freestyle?

The service procedure for front sway bar links starts by securing your vehicle in NEUTRAL gear and hoisting it. Installation should use new parts with matching part numbers because suspension fasteners operate as performance controllers and their failure produces substantial repair expenses. Do not use power tools on the sway bar link nuts because it can damage ball joints or boots. First, loosen the nuts before securing the ball joints with the hex-holding tool to prevent turning motion while you remove the upper nut, which needs disposal. The installation process requires tightening the upper nut to 55 Nm (41 ft. lbs.). The same torque tightening method should be applied when fastening the new lower nut after removing and discarding the initial one. During sway bar link installation, secure the ball joints with the hex-holding feature to prevent them from rotating before tightening the nuts using a socket with a torque wrench and performing the opposite removal steps.

OEM Ford Freestyle Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Links found

View related parts
Ford Freestyle Stabilizer Link, Front Passenger Side
Part Number: 7F9Z-5K484-R
$38.77 MSRP: $62.55
You Save: $23.78 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit, Front Left/Right.; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Passenger Side
- Replaces: 5F9Z-5K484-AR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Stabilizer Link, Front Driver Side
Part Number: 7F9Z-5K483-L
$38.36 MSRP: $60.91
You Save: $22.55 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit, Front Left/Right.; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Driver Side
- Replaces: 5F9Z-5K483-AL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Stabilizer Link, Rear
Part Number: 7F9Z-5K484-S
$31.24 MSRP: $42.51
You Save: $11.27 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: 5F9Z-5K484-AS
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS

Ford Freestyle Sway Bar Link

Welcome to our website where you can discover high-quality, genuine Ford Freestyle Sway Bar Link. We offer an extensive inventory of OEM Ford Freestyle Sway Bar Link at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Freestyle Sway Bar Link Parts Questions & Experts Answers

Stabilizer Link, Front Driver Side
7F9Z-5K483-L
Q: How to service and repair the front sway bar link on Ford Freestyle?
A: The service procedure for front sway bar links starts by securing your vehicle in NEUTRAL gear and hoisting it. Installation should use new parts with matching part numbers because suspension fasteners operate as performance controllers and their failure produces substantial repair expenses. Do not use power tools on the sway bar link nuts because it can damage ball joints or boots. First, loosen the nuts before securing the ball joints with the hex-holding tool to prevent turning motion while you remove the upper nut, which needs disposal. The installation process requires tightening the upper nut to 55 Nm (41 ft. lbs.). The same torque tightening method should be applied when fastening the new lower nut after removing and discarding the initial one. During sway bar link installation, secure the ball joints with the hex-holding feature to prevent them from rotating before tightening the nuts using a socket with a torque wrench and performing the opposite removal steps.