How to Properly Maintain the Crankshaft Position Sensor in a Ford Ranger?

The Crankshaft Position Sensor service starts with unclipping the water pump inlet tube. First disconnect the electrical connector which belongs to the Crankshaft Position (CKP) sensor. Start by disconnecting the electrical connector of the Crankshaft Position sensor before you detach the bolt supporting the sensor then extract it. The sensor installation requires following the backward order of its removal steps.

How to Service the Crankshaft Position Sensor on Ford Ranger?

A hoisted vehicle in neutral position is the first step to service the crankshaft position (CKP) sensor. First disconnect both the ground cable from the battery then the electrical connector from the CKP sensor. Unbolt the two fasteners securing the CKP sensor until it becomes removable from its position. Installation requires performing the opposite steps of removal then tightening bolts to 10 Nm (89 lb-in).

OEM Ford Ranger Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Crankshaft Position Sensors found

View related parts
Ford Ranger Crankshaft Position Sensor Part Number: 1L5Z-6C315-AA
$21.63 MSRP: $34.91
You Save: $13.28 (39%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Manufacturer Note: Sensor asy. (Crankshaft position) #1L5E 6C315-AA
- Replaces: F57Z-6C315-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2001 Ford Ranger | Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Ranger Crankshaft Position Sensor Part Number: 5L2Z-6C315-A
$31.37 MSRP: $49.82
You Save: $18.45 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Electrical Connector.; Position Sensor; Sensor - Crankshaft Position - Cps
- Replaces: 1L2Z-6C315-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Crankshaft Position Sensor Part Number: 1F1Z-6C315-DB
$40.19 MSRP: $63.82
You Save: $23.63 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Sensor asy. (Crankshaft position) #1F1E 6C315-DA
- Replaces: 1F1Z-6C315-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2008 Ford Ranger | Edge, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Crankshaft Position Sensor Part Number: 1S7Z-6C315-AAA
$41.33 MSRP: $65.64
You Save: $24.31 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Service Kit With Sensor And Installation Tool
- Replaces: 1S7Z-6C315-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2011 Ford Ranger | Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Crankshaft Position Sensor Part Number: FOTZ-6C315-DA
$50.20 MSRP: $82.60
You Save: $32.40 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor
- Replaces: FOTZ-6C315-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1999 Ford Ranger | Custom, S, Splash, Sport, STX, XL, XL Sport, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Crankshaft Position Sensor Part Number: JX6Z-6C315-B
$41.12 MSRP: $64.18
You Save: $23.06 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: AS7Z-6C315-A, DY-1461, DY-1204, JX6Z-6C315-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Crankshaft Position Sensor Part Number: F3DZ-6C315-AA
Product Specifications
- Other Name: Sensor - Crankshaft; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1999 Ford Ranger | Splash, Sport, STX, XL, XL Sport, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Ford Ranger Crankshaft Position Sensor

OEM Crankshaft Position Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Crankshaft Position Sensor with long life and a perfect fit. Come to our website and find genuine Ford Ranger parts. We keep a wide inventory of OEM Ranger parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Ranger Crankshaft Position Sensor is another crucial part that is chiefly an electronic, which helps to control the phase of the engine and sends impulses to the engine managing system. This sensor is very vital in administering fuel injection, ignition timing, and certain engine features. The variety of the sensors of Ranger vehicles consists of inductive, Hall Effect, magnetoresistive, and optical sensors that differ by specific characteristics. The Crankshaft Position Sensor is primarily responsible for communicating position and rotation speed of the crankshaft to the Engine Control Unit, for proper running of the engine. The failure of this sensor may result in starting difficulties and other related issues regarding the engine.

Ford Ranger Crankshaft Position Sensor Parts and Q&A

Crankshaft Position Sensor
1F1Z-6C315-DB
Q: How to Properly Maintain the Crankshaft Position Sensor in a Ford Ranger?
A:
The Crankshaft Position Sensor service starts with unclipping the water pump inlet tube. First disconnect the electrical connector which belongs to the Crankshaft Position (CKP) sensor. Start by disconnecting the electrical connector of the Crankshaft Position sensor before you detach the bolt supporting the sensor then extract it. The sensor installation requires following the backward order of its removal steps.
Crankshaft Position Sensor
1S7Z-6C315-AAA
Q: How to Service the Crankshaft Position Sensor on Ford Ranger?
A:
A hoisted vehicle in neutral position is the first step to service the crankshaft position (CKP) sensor. First disconnect both the ground cable from the battery then the electrical connector from the CKP sensor. Unbolt the two fasteners securing the CKP sensor until it becomes removable from its position. Installation requires performing the opposite steps of removal then tightening bolts to 10 Nm (89 lb-in).