How to Service and Repair the Spark Plug Wire on Ford Ranger?

Start the spark plug wire service and repair operation with spark plug wire detachment that requires gentle twisting followed by upward pulling to prevent connector separation inside the boot. The route of the spark plug wire through another component requires proper disconnection. The installation requires following the removal steps in reverse order with the application of silicone dielectric compound inside the spark plug wire boots. A clean damp cloth should be used to wipe spark plug wire sets before inspection takes place while examining the boot-tube components for cuts, pinches, tears or boot cracks as part of the check. This inspection process should happen without removing the wires from spark plugs or coils.

How to Properly Handle and Maintain the Spark Plug Wire on a Ford Ranger?

Start spark plug wire servicing by carefully taking off spark plug wires but avoid touching the connector in the boot because separation might occur. The spark plug wire sets should be cleaned with a damp cloth before inspection while looking for any visible damage like cuts or pinches and cracks or tears that are present on the boots without separating the wires from spark plugs or ignition coils. You should begin by twisting then pulling the spark plug wire upward before detaching routes that may connect to other wires. Reinstall the connector by following the removal steps and use silicone dielectric compound at designated areas.

OEM Ford Ranger Spark Plug Wire

Spark Plug Ignition Wires

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Spark Plug Wires found

View related parts
Ford Ranger Cable Set Part Number: F1PZ-12259-E
$42.03 MSRP: $65.60
You Save: $23.57 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Assembly - Ignition; Spark Plug Wire
- Manufacturer Note: Parts List No. 6, w/ Distributor ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1994 Ford Ranger | Custom, S, Splash, Sport, STX, XL, XLT | 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Set Part Number: FOPZ-12259-J
$36.98 MSRP: $58.73
You Save: $21.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Assembly - Ignition; Spark Plug Wire
- Manufacturer Note: Parts List No. 12, with EDIS
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1996 Ford Ranger | Custom, S, S Plus, Splash, Sport, STX, XL, XL Sport, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Cable Set Part Number: F5PZ-12259-A
$40.18 MSRP: $63.80
You Save: $23.62 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Spark Plug Wire
- Manufacturer Note: Parts List No. 7, With EDIS
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Ranger | Splash, Sport, STX, XL, XL Sport, XLT | 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Set Part Number: F3PZ-12259-B
$54.82 MSRP: $90.20
You Save: $35.38 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Assembly - Ignition; Spark Plug Wire Set; Spark Plug Wire; Ignition Set
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2001 Ford Ranger | Custom, S, Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Ranger Cable Set Part Number: 5U2Z-12259-C
$46.49 MSRP: $73.82
You Save: $27.33 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Spark Plug Wire Set; Spark Plug Wire; Plug Wire Set; Ignition Set
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2011 Ford Ranger | Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Cable Set Part Number: F7PZ-12259-DA
$43.40 MSRP: $68.91
You Save: $25.51 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Spark Plug Wire Set; Spark Plug Wire; Ignition Set
- Manufacturer Note: Parts List No. 13, OHV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2000 Ford Ranger | Splash, Sport, STX, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Cable Set Part Number: E8PZ-12259-A
$38.92 MSRP: $61.80
You Save: $22.88 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Spark Plug Wire
- Replaces: E6PZ-12259-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1989 Ford Ranger | Base, Custom, S, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable Set Part Number: 1L5Z-12259-AA
$31.26 MSRP: $49.64
You Save: $18.38 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Assembly - Ignition; Spark Plug Wire Set; Ignition Set; Spark Plug Wire
- Manufacturer Note: Parts List No. 47
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2011 Ford Ranger | Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable Set Part Number: 4L5Z-12259-A
$56.80 MSRP: $93.45
You Save: $36.65 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Spark Plug Wire Set; Ignition Set; Spark Plug Wire
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2008 Ford Ranger | Edge, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Set Part Number: F8PZ-12259-CA
$46.14 MSRP: $73.27
You Save: $27.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Spark Plug Wire Set; Spark Plug Wire; Ignition Set
- Manufacturer Note: Parts List No. 8, With EDIS
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Ford Ranger | Splash, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Set Part Number: E9PZ-12259-P
$38.36 MSRP: $60.91
You Save: $22.55 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Spark Plug Wire
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1992 Ford Ranger | Base, Custom, GT, S, Sport, STX, XL, XLS, XLT | 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS
View related parts
Ford Ranger Cable Set Part Number: 1U2Z-12259-EA
$46.77 MSRP: $76.40
You Save: $29.63 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Spark Plug Wire Set; Spark Plug Wire; Ignition Set
- Manufacturer Note: Parts List No. 41
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Ranger | Edge, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Set Part Number: F1PZ-12259-C
Product Specifications
- Other Name: Wire Assembly - Ignition; Spark Plug Wire
- Manufacturer Note: Parts List No. 1
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1991 Ford Ranger | Custom, S, S Plus, Sport, STX, XLT | 4 Cyl 2.3 L GAS

Ford Ranger Spark Plug Wire

OEM Spark Plug Wire boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Spark Plug Wire with long life and a perfect fit. Come to our website and find genuine Ford Ranger parts. We keep a wide inventory of OEM Ranger parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Spark Plug Wire in the Ford Ranger automobile is essential in the transfer of high voltage from the ignition system to ignite the fuel - air mixture in the engine cylinders. They are referred to as high tension leads; these wires are manufactured form thick insulation which does not burn easily as a result of arcing. They are of required lengths with metallic ends to provide Electrical connections which are rigid. Modern Spark Plug Wires have incorporation to eliminate radio frequency interferences. Older engine designs may have a distributor cap and Coil wire, those are no longer seen in today's engines where a coil pack or individual ignition coils directly mounted on spark plugs replacing the Spark Plug Wires. The position and condition of such wires are critical to the managerial excellence of both internal combustion engines and their endurance.

Ford Ranger Spark Plug Wire Parts and Q&A

Cable Set
1L5Z-12259-AA
Q: How to Service and Repair the Spark Plug Wire on Ford Ranger?
A:
Start the Spark Plug wire service and repair operation with spark plug wire detachment that requires gentle twisting followed by upward pulling to prevent connector separation inside the boot. The route of the spark plug wire through another component requires proper disconnection. The installation requires following the removal steps in reverse order with the application of silicone dielectric compound inside the spark plug wire boots. A clean damp cloth should be used to wipe spark plug wire sets before inspection takes place while examining the boot-tube components for cuts, pinches, tears or boot cracks as part of the check. This inspection process should happen without removing the wires from spark plugs or coils.
Cable Set
4L5Z-12259-A
Q: How to Properly Handle and Maintain the Spark Plug Wire on a Ford Ranger?
A:
Start Spark Plug wire servicing by carefully taking off spark plug wires but avoid touching the connector in the boot because separation might occur. The spark plug wire sets should be cleaned with a damp cloth before inspection while looking for any visible damage like cuts or pinches and cracks or tears that are present on the boots without separating the wires from spark plugs or Ignition Coils. You should begin by twisting then pulling the spark plug wire upward before detaching routes that may connect to other wires. Reinstall the connector by following the removal steps and use silicone dielectric compound at designated areas.