How to service the front cross-member for transmission support on Ford Ranger?

Service of transmission support crossmember requires placing the vehicle into NEUTRAL position on a hoist. Remove first the two transmission mount nuts from the transmission support crossmember before you tighten them to 90 Nm (66 lb-ft) when finishing the work. The transmission support requires a suitable jack to hold it in place instead of allowing it to hang unsupported. You need to take out two horizontal bolts and nuts which are installed on each side of the transmission support crossmember before reinstallation where you must torque them to 127 Nm (94 lb-ft). You should unwind the four vertical bolts and nuts that exist on both sides of the crossmember while reinstalling them using a torque of 99 Nm (73 lb-ft). The last step requires performing the reverse procedure for installing the transmission support crossmember.

OEM Ford Ranger Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Front Cross-Members found

View related parts
Ford Ranger Front Crossmember, Driver Side
Part Number: YL5Z-1310685-AA
$156.35 MSRP: $227.58
You Save: $71.23 (32%)
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Floor Pan Crossmember, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2011 Ford Ranger | Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Trailing Arm, Front
Part Number: KB3Z-5L005-A
$170.68 MSRP: $263.40
You Save: $92.72 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Trailing; Suspension Trailing Arm, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Crossmember, Front
Part Number: KB3Z-5W019-B
$481.71 MSRP: $707.35
You Save: $225.64 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly - Front; Frame Side Member Crossmember, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Crossmember, Front
Part Number: KB3Z-5W019-A
$238.95 MSRP: $350.88
You Save: $111.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly - Front; Frame Side Member Crossmember, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Front Frame
Part Number: KB3Z-5019-A
$4742.27 MSRP: $7527.42
You Save: $2785.15 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly; Frame Side Member Assembly, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Frame Assembly
Part Number: KB3Z-5005-R
$3194.47 MSRP: $4732.55
You Save: $1538.08 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: KB3Z-5005-M, KB3Z-5005-A, KB3Z-5005-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Frame Assembly
Part Number: KB3Z-5005-Q
$3207.27 MSRP: $4751.52
You Save: $1544.25 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: KB3Z-5005-L, KB3Z-5005-B, KB3Z-5005-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Frame Assembly
Part Number: KB3Z-5005-P
$3110.02 MSRP: $4607.43
You Save: $1497.41 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: KB3Z-5005-K, KB3Z-5005-D, KB3Z-5005-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Frame Assembly
Part Number: KB3Z-5005-N
$2660.59 MSRP: $3941.62
You Save: $1281.03 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: KB3Z-5005-C, KB3Z-5005-G, KB3Z-5005-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Trans Crossmember, Center
Part Number: KB3Z-6A023-C
$229.26 MSRP: $357.10
You Save: $127.84 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Transmission Center
- Position: Center
- Replaces: KB3Z-6A023-A, KB3Z-6A023-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Front Crossmember, Passenger Side
Part Number: YL5Z-1310684-AA
$88.92 MSRP: $123.01
You Save: $34.09 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Floor Pan Crossmember, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2011 Ford Ranger | Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Front Crossmember, Driver Side
Part Number: F87Z1310685AA
Product Specifications
- Other Name: Crossmember Assembly; Floor Pan Crossmember, Front Left; Cross Member Assembly
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Front Crossmember, Driver Side
Part Number: F87Z-1010685-AA
Product Specifications
- Other Name: Cross Member Assembly; Floor Pan Crossmember, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-1999 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Front Crossmember, Passenger Side
Part Number: F87Z-1010684-AA
Product Specifications
- Other Name: Cross Member Assembly; Floor Pan Crossmember, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-1999 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

Ford Ranger Front Cross-Member

Welcome to our website where you can discover high-quality, genuine Ford Ranger Front Cross-Member. We offer an extensive inventory of OEM Ford Ranger Front Cross-Member at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Ranger Front Cross-Member Parts Questions & Experts Answers

Front Crossmember, Passenger Side
YL5Z-1310684-AA
Q: How to service the front cross-member for transmission support on Ford Ranger?
A: Service of transmission support crossmember requires placing the vehicle into NEUTRAL position on a hoist. Remove first the two transmission mount nuts from the transmission support crossmember before you tighten them to 90 Nm (66 lb-ft) when finishing the work. The transmission support requires a suitable jack to hold it in place instead of allowing it to hang unsupported. You need to take out two horizontal bolts and nuts which are installed on each side of the transmission support crossmember before reinstallation where you must torque them to 127 Nm (94 lb-ft). You should unwind the four vertical bolts and nuts that exist on both sides of the crossmember while reinstalling them using a torque of 99 Nm (73 lb-ft). The last step requires performing the reverse procedure for installing the transmission support crossmember.