How to Service the Rear Crossmember for Transmission Support on Ford Ranger?

Service operations on the transmission support crossmember start by positioning a hoisted vehicle into neutral mode. Start the process by taking off the two transmission mount nuts from the transmission support crossmember then discard them. The crossmember nuts need to be tightened to 90 Nm during reinstallation. A proper jack should be used to sustain the transmission when servicing it because free suspension is dangerous. The procedure for removing and installing the transmission support crossmember starts by removing its two opposing horizontal bolts and nuts then tightening the new ones to 127 Nm (94 lb-ft) torque. First remove the four vertical bolts together with nuts situated on each side then install new fasteners before securing them at 99 Nm (73 lb-ft) torque. The transmission support crossmember needs removal before installing it back in position using the inverse steps of removal.

OEM Ford Ranger Rear Crossmember

Rear Suspension Crossmember

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Rear Crossmembers found

View related parts
Ford Ranger Rear Crossmember Part Number: XL5Z-9910608-AA
$49.33 MSRP: $70.57
You Save: $21.24 (31%)
ADD TO CART
Product Specifications
- Other Name: Member - Rear Floor Cross; Cross Sill
- Position: Rear
- Replaces: F87Z-9910608-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-2011 Ford Ranger | Base, Custom, Edge, FX4, GT, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Floor Crossmember, Center Part Number: KB3Z-2110608-A
$41.40 MSRP: $59.23
You Save: $17.83 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Member - Rear Floor Cross; Floor Pan Crossmember, Center Front
- Position: Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Floor Crossmember, Rear Center Part Number: KB3Z-9910780-A
$170.47 MSRP: $263.07
You Save: $92.60 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Floor Pan Crossmember, Center Rear
- Position: Rear Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Rear Crossmember Part Number: KB3Z-21442A68-A
$54.71 MSRP: $78.27
You Save: $23.56 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Rear Floor Pan Part Number: KB3Z-2110020-A
$702.06 MSRP: $1040.08
You Save: $338.02 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension - Floor Side Reinforcement; Floor Pan, Rear; Extension - Floor Side Reinforcemnt; Floor Pan
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Rear Crossmember Part Number: XL5Z-8310608-AA
Product Specifications
- Other Name: Member - Rear Floor; Member - Rear Floor Cross
- Position: Rear
- Replaces: F87Z-8310608-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2005 Ford Ranger | Edge, FX4, Splash, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Rear Floor Pan Part Number: KB3Z-2610020-A
Product Specifications
- Other Name: Extension - Floor Side Reinforcement; Floor Pan, Rear; Extension - Floor Side Reinforcemnt; Floor Pan
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Rear Crossmember Part Number: F87Z-13107A94-AA
Product Specifications
- Other Name: Cross Member Assembly - Rear; Floor Pan Crossmember, Rear; Extension; Crossmember; Cross Member Assembly - Rear Seat
- Manufacturer Note: Center, Super Cab
- Position: Rear
- Replaces: E6TZ-13107A94-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-2011 Ford Ranger | Base, Custom, Edge, FX4, GT, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Rear Crossmember, Center Part Number: 4L5Z-1010624-AA
Product Specifications
- Other Name: Member Assembly - Cross Center; Floor Pan Crossmember, Rear; Member Assembly - Cross - Center
- Position: Rear Center
- Replaces: F87Z-1010624-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Ranger | Edge, Splash, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

Ford Ranger Rear Crossmember

OEM Rear Crossmember boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Rear Crossmember with long life and a perfect fit. Come to our website and find genuine Ford Ranger parts. We keep a wide inventory of OEM Ranger parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Ranger Rear Crossmember functions as an essential member which delivers significant benefits to the vehicle reliability and performance excellence of Ford Ranger automobiles. Fundamentally the Rear Crossmember implements its role through supporting drivetrain structures to maintain proper alignment and operational stability. Over multiple Ranger models the product has developed design improvements that enhance performance along with durability characteristics. The Ford Ranger requires a durable Rear Crossmember for its structural safety because compromised conditions from rust or damage expose dangerous safety implications. Multiple Ranger generations with the T6 platform receive support from this component because it functions as a versatile solution for performance and safety improvements. The Ford car Rear Crossmember shines in the market because its superior engineering achieves dual functions by carrying transmission and engine weight and enhancing the driving quality. The Rear Crossmember illustrates Ford's dedication to quality and performance through its design features which protect against conditions of road and off-road environments. The the automaker model operates with peak operational efficiency because of the essential role the Rear Crossmember serves in vehicle function making it an important element for anyone who values reliability and vehicle safety.

Ford Ranger Rear Crossmember Parts and Q&A

Rear Crossmember, Center
4L5Z-1010624-AA
Q: How to Service the Rear Crossmember for Transmission Support on Ford Ranger?
A:
Service operations on the transmission support crossmember start by positioning a hoisted vehicle into neutral mode. Start the process by taking off the two transmission mount nuts from the transmission support crossmember then discard them. The crossmember nuts need to be tightened to 90 Nm during reinstallation. A proper jack should be used to sustain the transmission when servicing it because free suspension is dangerous. The procedure for removing and installing the transmission support crossmember starts by removing its two opposing horizontal bolts and nuts then tightening the new ones to 127 Nm (94 lb-ft) torque. First remove the four vertical bolts together with nuts situated on each side then install new fasteners before securing them at 99 Nm (73 lb-ft) torque. The transmission support crossmember needs removal before installing it back in position using the inverse steps of removal.