How to service the front crankshaft seal on Ford Taurus?

Service operations on the front crankshaft seal should begin by positioning the vehicle in neutral gear with the assistance of a hoist. Separate the crankshaft pulley before pulling out and discarding the crankshaft front seal by using an oil seal remover. The application of metal surface preparation needs to occur before moving forward with cleaning the sealing areas. Clean engine oil must be applied before installing the engine front cover by pouring it into the front seal bore of the crankshaft. The correct tools for installing the new crankshaft front seal are the front crankshaft seal installer and crankshaft vibration damper installer. Finally, reinstall the crankshaft pulley.

How to Service the Rear Crankshaft Seal on Ford Taurus?

Start the crankshaft rear seal servicing after positioning the vehicle in neutral on a hoist. Start by removing both the flexplate along with the crankshaft sensor ring. You need the crankshaft rear oil seal remover and slide hammer to take away and dispose of the worn-out crankshaft rear seal. All sealing surfaces require metal surface prep cleaning before proceeding. Engine oil should be used to both lubricate new crankshaft rear seals and the installation bore. Set the rear main seal installer against the end of the crankshaft and place a new crankshaft rear seal onto the tool. Proceed with the rear main seal installer while using the handle to insert the new crankshaft rear seal then continue with installation of the crankshaft sensor ring and the flexplate.

OEM Ford Taurus Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Crankshaft Seals found

View related parts
Ford Taurus Rear Main Seal Retainer Part Number: CG1Z-6335-B
$47.18 MSRP: $67.50
You Save: $20.32 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Oil Seal
- Replaces: 7T4Z-6K301-A, AT4Z-6K301-B, CG1Z-6K301-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2019 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Rear Main Seal Part Number: 1S7Z-6A321-B
$59.56 MSRP: $86.70
You Save: $27.14 (32%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Rear Seal; Rear Main Seal Retainer
- Position: Rear
- Replaces: 1S7Z-6D309-AA, 1S7Z-6K301-AA, 1S7Z-6K301-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Oil Seal, Front Part Number: XW4Z-6700-AA
$10.89 MSRP: $15.45
You Save: $4.56 (30%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil - Front; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal
- Position: Front
- Replaces: XW4Z-6700-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2019 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Rear Main Seal Part Number: F4AZ-6701-A
$29.36 MSRP: $41.65
You Save: $12.29 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal, Rear; Timing Cover Gasket; Timing Cover Seal; Oil Seal; Crankshaft Seal; Rear Seal; Timing Cover Seal; Oil Pan Seal.
- Position: Rear
- Replaces: F3AZ-6701-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2005 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Rear Main Seal Part Number: AT4Z-6701-A
$34.92 MSRP: $50.83
You Save: $15.91 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Rear Seal; Engine Crankshaft Seal
- Position: Rear
- Replaces: 7T4Z-6701-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2019 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Rear Main Seal Part Number: F37Z-6701-A
$27.08 MSRP: $39.42
You Save: $12.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal, Rear; Oil Pan Seal; Crankshaft Seal; Rear Seal; Oil Pan Rear Seal; Seal; Engine Crankshaft Seal
- Position: Rear
- Replaces: E8DZ-6701-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-2007 Ford Taurus | G, GL, L, LX, MT5, SE, SE Comfort, SEL, SES, SHO, SVG | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Rear Main Seal Part Number: F1SZ-6701-A
$46.60 MSRP: $66.67
You Save: $20.07 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal, Rear; Timing Cover Gasket; Timing Cover Seal; Oil Seal; Crankshaft Seal; Rear Seal; Timing Cover Oil Seal; Engine Crankshaft Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1995, 1989 Ford Taurus | GL, LX, SE | 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Rear Main Seal Part Number: E5ZZ-6701-A
$15.53 MSRP: $21.14
You Save: $5.61 (27%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal; Crankshaft Seal
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990, 1988 Ford Taurus | GL, LX | 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Oil Seal, Front Part Number: CM5Z-6700-E
$8.94 MSRP: $12.68
You Save: $3.74 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil - Front; Engine Crankshaft Seal; Timing Cover Gasket & Seal.; Front Crank Seal; Front Seal; Front Cover Seal; Timing Cover Front Seal
- Position: Front
- Replaces: 1S7Z-6700-AA, CM5Z-6700-C, 9E5Z-6700-A, CM5Z-6700-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS

Ford Taurus Crankshaft Seal

OEM Crankshaft Seal boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Crankshaft Seal with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Crankshaft Seal can be found in the Ford Taurus cars on the front side of the engine,its purpose is to stop the crankcase oil from leaking. Made through the use of metal and rubber, this round seal aims at providing more lubrication to the engine and thus reducing on wear and tear of the various parts of the engine. In the course of the preceding years, it is possible that many styles of Crankshaft Seal may have been used in different models of Ford Taurus but the purpose of the cars' part has not changed. A Crankshaft Seal which is failing presents symptoms such as oil leakage and rough operation in high mileage cars unless it is changed so as to allow the engine to run as smoothly as possible.

Ford Taurus Crankshaft Seal Parts and Q&A

Oil Seal, Front
XW4Z-6700-AA
Q: How to service the front crankshaft seal on Ford Taurus?
A:
Service operations on the front crankshaft seal should begin by positioning the vehicle in neutral gear with the assistance of a hoist. Separate the crankshaft pulley before pulling out and discarding the crankshaft front seal by using an oil seal remover. The application of metal surface preparation needs to occur before moving forward with cleaning the sealing areas. Clean engine oil must be applied before installing the engine front cover by pouring it into the front seal bore of the crankshaft. The correct tools for installing the new crankshaft front seal are the front crankshaft seal installer and crankshaft vibration damper installer. Finally, reinstall the crankshaft pulley.
Rear Main Seal
AT4Z-6701-A
Q: How to Service the Rear Crankshaft Seal on Ford Taurus?
A:
Start the crankshaft rear seal servicing after positioning the vehicle in neutral on a hoist. Start by removing both the flexplate along with the crankshaft sensor ring. You need the crankshaft rear oil seal remover and slide hammer to take away and dispose of the worn-out crankshaft rear seal. All sealing surfaces require metal surface prep cleaning before proceeding. Engine oil should be used to both lubricate new crankshaft rear seals and the installation bore. Set the rear main seal installer against the end of the crankshaft and place a new crankshaft rear seal onto the tool. Proceed with the rear main seal installer while using the handle to insert the new crankshaft rear seal then continue with installation of the crankshaft sensor ring and the flexplate.