How to service the Engine Control Module on Ford Taurus?

Service of the Engine Control Module requires first positioning the windshield wiper arms at the windshield's top before disconnecting the battery ground cable. Start by cutting free the RH cowl panel grille with its three retaining clips then pull off the clip on the RH cowl extension panel along with its three screws. The EVAP canister purge valve return tube needs disconnecting from the intake manifold before setting it to the side. The powertrain control module (PCM) electrical connection needs removal before taking out the gasket. The PCM can be released by moving the two retaining bolts. Installation requires tightening the bolts to 5 Nm (44 lb-in). Follow the removal steps in reverse order when reinstalling the components while torquing them to 7 Nm (62 lb-in).

How to remove and replace the Engine Control Module (ECM) on Ford Taurus?

The first step in removing and replacing the Powertrain Control Module (PCM) begins with retrieving the module configuration through proper execution of the Programmable Module Installation (PMI) procedure steps for module configuration retrieval. Start by taking off the cowl panel grille followed by a disconnect of the three PCM electrical connectors. First loosen the PCM by removing the two nuts then pull out the module from its place. Position the PCM before fastening it with two nuts which need to be tightened to 8 Nm (71 lb-in). The cowl panel grille can be replaced after reconnecting the three PCM electrical connectors. The module configuration requires restoration after installation through execution of the PMI procedure's configuration restoration steps. Complete the Passive Anti-Theft System (PATS) programming through executing the Parameter Reset procedure.

OEM Ford Taurus Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

42 Engine Control Modules found

View related parts
Ford Taurus PCM Part Number: FJ5Z-12A650-BANP
$781.20 MSRP: $1240.00
You Save: $458.80 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM; Module - Engine Control - Eec V
- Replaces: FG1Z-12A650-TANP, FJ5Z-12A650-DC, EE9Z-12A650-MA, FJ5Z-12A650-EC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Control Module Part Number: DU2Z-12A297-A
$60.00 MSRP: $98.73
You Save: $38.73 (40%)
ADD TO CART
Product Specifications
- Other Name: Module - Ignition; Ignition Control Module; Ignition Module; Computer; ECM
- Replaces: 5U2Z-12A297-A, E43Z-12A297-A, 5U2Z-12A297-C, E6SZ-12A297-A, DY-1074, DY-1076
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1991 Ford Taurus | GL, L, LX, MT5 | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus PCM Part Number: 8G1Z-12A650-LHRM
$570.11 MSRP: $841.50
You Save: $271.39 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Reman Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM
- Replaces: 8G1Z-12A650-JF, 8F9Z-12A650-CH, 8F9Z-12A650-CG, 8G1Z-12A650-JE, 8G1Z-12A650-LG, 8G1Z-12A650-LE, 8G1Z-12A650-LF, 8G1Z-12A650-JG, 8F9Z-12A650-CE, 8F9Z-12A650-CF, 8G1Z-12A650-JH, 8G1Z-12A650-LH, 8G1Z-12A650-LD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus EEC Module Part Number: FL3Z-12A650-BEBNP
$496.90 MSRP: $729.67
You Save: $232.77 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; PCM; ECM; Module - Engine Control - Eec V
- Replaces: FL3Z-12A650-BEANP, FL3Z-12A650-BGANP, FL3Z-12A650-LANP
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2019 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Control Module Part Number: 5U2Z-12A297-B
$89.17 MSRP: $146.73
You Save: $57.56 (40%)
ADD TO CART
Product Specifications
- Other Name: Module - Ignition; Ignition Control Module; Ignition Module; ECM
- Replaces: E8DZ-12A297-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1990 Ford Taurus | GL, LX | 6 Cyl 3.8 L GAS
View related parts
Ford Taurus PCM Part Number: 8G1Z-12A650-HFRM
$574.70 MSRP: $848.30
You Save: $273.60 (33%)
ADD TO CART
Product Specifications
- Other Name: Reman Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM
- Replaces: 8G1Z-12A650-HE, 8U7Z-12A650-AMA, 8U7Z-12A650-AMB, 8G1Z-12A650-HF, 8F9Z-12A650-BF, 8F9Z-12A650-BE, 8U7Z-12A650-ANA, 8U7Z-12A650-ANB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus PCM Part Number: 2U7Z-12A650-BLD
Product Specifications
- Other Name: Module - Engine Control - EEC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford Taurus | LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus PCM Part Number: 3U7Z-12A650-GYC
Product Specifications
- Other Name: Module - Engine Control
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Taurus | LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus PCM Part Number: 5F1Z-12A650-ADRM
Product Specifications
- Other Name: Reman Module - Engine Control - EEC; Engine Control Module; ECM
- Replaces: 5U7Z-12A650-JD, 4F1Z-12A650-VC, 4U7Z-12A650-CVD, 4U7Z-12A650-CXB, 4U7Z-12A650-CUB, 5F1Z-12A650-CC, 5F1Z-12A650-AD, 5U7Z-12A650-JA, 5F1Z-12A650-CD, 4U7Z-12A650-CXE, 5F1Z-12A650-AC, 5U7Z-12A650-HA, 4U7Z-12A650-CTB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Taurus | LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus PCM Part Number: 5F1Z-12A650-GGRM
Product Specifications
- Other Name: Reman Module - Engine Control - EEC
- Replaces: 5F1Z-12A650-HD, 5F1Z-12A650-GF, 5F1Z-12A650-GG, 5U7Z-12A650-DSC, 5F1Z-12A650-HC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Ford Taurus | SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus PCM Part Number: 5U7Z-12A650-FBRM
Product Specifications
- Other Name: Reman Module - Engine Control - EEC; Engine Control Module; ECM
- Replaces: 4U7Z-12A650-HSB, 4U7Z-12A650-HTB, 5U7Z-12A650-FB, 4U7Z-12A650-HUB, 4U7Z-12A650-HVB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Taurus | SE, SEL, SES | 6 Cyl 3.0 L GAS
View related parts
Ford Taurus ECM Part Number: AG1Z-12A650-SA
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Replaces: AG1Z-12A650-EG, AG1Z-12A650-EF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus ECM Part Number: AG1Z-12A650-TA
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Replaces: AG1Z-12A650-FG, AG1Z-12A650-FF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus ECM Part Number: AG1Z-12A650-UA
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Replaces: AG1Z-12A650-GG, AG1Z-12A650-GF, AG1Z-12A650-GE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus ECM Part Number: AG1Z-12A650-VA
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Replaces: AG1Z-12A650-JG, AG1Z-12A650-JF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus ECM Part Number: AG1Z-12A650-XA
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Replaces: AG1Z-12A650-KG, AG1Z-12A650-KF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus ECM Part Number: BA5Z-12A650-AC
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus ECM Part Number: BA5Z-12A650-BC
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus ECM Part Number: BG1Z-12A650-FG
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Replaces: BG1Z-12A650-FF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus ECM Part Number: BG1Z-12A650-JG
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V; Engine Control Module
- Replaces: BG1Z-12A650-JF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS

| Page 1 of 3 |Next >

1-20 of 42 Results

Ford Taurus Engine Control Module

OEM Engine Control Module boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Engine Control Module with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Engine Control Module or simply the ECM is a crucial issue that sets a perfect example for Ford's reliability and performance reflecting to one of its known vehicles, the Ford Taurus. Acting as the main control system in the Ford Taurus, the ECM receives information from sensors like the oxygen sensors and then controls a multitude of operations within a car's engine as basic as the fuel-air mixture as well as the ignition timing. This optimization besides improving the operating effectiveness of the Ford Taurus is very helpful for safety control of the vehicle because it governs important components such as the fuel injection and the idle speed. FEM Fits and compatible with various models of Ford Taurus, thus making it an ideal option for the car's owner to maintain or upgrade the performance of the car's engine. Newer generations of Ford Taurus ECM brought in microprocessor based control systems that are compatible with other control systems in the automobile and hence, proved to be more beneficial in operation. Notably, in the market of automotive new products, Engine Control Module is prominent for its function of responding to the change in driving environment and providing the most suitable output for the car. Also to the availability of new and remanufactured ECM options, the car owners can have an access to cost-efficient ways of maintaining the reliable Ford Taurus. Holding an important position to enhance the engine performance and safety, the Engine Control Module is one of the principal aspects that support the Ford Taurus engineering strength, which in turn reestablishes the company's quality and innovation.

Ford Taurus Engine Control Module Parts and Q&A

PCM
5F1Z-12A650-ADRM
Q: How to service the Engine Control Module on Ford Taurus?
A:
Service of the Engine Control Module requires first positioning the windshield Wiper Arms at the windshield's top before disconnecting the battery ground cable. Start by cutting free the RH cowl panel grille with its three retaining clips then pull off the clip on the RH cowl extension panel along with its three screws. The EVAP canister purge valve return tube needs disconnecting from the Intake Manifold before setting it to the side. The powertrain control module (PCM) electrical connection needs removal before taking out the gasket. The PCM can be released by moving the two retaining bolts. Installation requires tightening the bolts to 5 Nm (44 lb-in). Follow the removal steps in reverse order when reinstalling the components while torquing them to 7 Nm (62 lb-in).
PCM
8G1Z-12A650-LHRM
Q: How to remove and replace the Engine Control Module (ECM) on Ford Taurus?
A:
The first step in removing and replacing the Powertrain Control Module (PCM) begins with retrieving the module configuration through proper execution of the Programmable Module Installation (PMI) procedure steps for module configuration retrieval. Start by taking off the cowl panel grille followed by a disconnect of the three PCM electrical connectors. First loosen the PCM by removing the two nuts then pull out the module from its place. Position the PCM before fastening it with two nuts which need to be tightened to 8 Nm (71 lb-in). The cowl panel grille can be replaced after reconnecting the three PCM electrical connectors. The module configuration requires restoration after installation through execution of the PMI procedure's configuration restoration steps. Complete the Passive Anti-Theft System (PATS) programming through executing the Parameter Reset procedure.