How to service the front seat backrest seat cover on Ford Taurus?

The service process for front seat backrest covers starts with depowering the SRS system followed by removing both head restraint and head restraint screws. Before proceeding further you should remove the screw and also remove the lumbar adjust handle when present. Handle the separation of the seat backrest trim cover from the hook-and-loop strip with great care because excessive force may result in tearing the cover. Start by releasing both J-clips and hook-and-loop strips from the bottom of the backrest trim cover and then carefully move it inside out up to the first front hog ring. The passenger seat backrest latch fold-flat release strap must pass through the bezel opening in the trim cover. To remove the seat backrest trim cover, first take out the first ring of hog rings and then cut off the hook-and-loop strip before turning the trim inside out. Finally remove the second row of hog rings. Unfasten the J-clips suspended from the trim cover at its rear section along with those securing the side air bag module backrest trim cover chute implementation. Thread the J-clip retainers along with the chute through the opening on the backrest foam pad of the side air bag module. Detach the hook-and-loop strips in front while you roll down the backrest trim cover then unfasten hog rings from the rear. Uninstall the head restraint guide by undoing the tabs which secure it. The installation process requires the backrest trim cover to rest on the backrest foam pad and frame before adding the hog rings. Place the duon tube above the wire hooks of the lumbar support before letting the cover roll down to reach the side air bag module. An inspection of the seat deployment chute should be performed for any damage. In case of damage the whole unit needs replacement. A thorough check must be performed on both the side air bag module and its mounting surfaces for damage alongside foreign particles which should be cleaned out. Insert the side air bag module backrest trim cover chute through the foam pad opening while passing its J-clip retainers afterward. Install the chute and retainers to encircle the side air bag module and backrest frame. Begin by adding the J-clips at the back edge of the trim cover then fasten the hook-and-loop strips and secure the second and first rows of hog rings from the front. To prepare the fold-flat feature on passenger seats push the backrest latch release strap through its opening located on the bezel. Complete the installation sequence by attaching the backrest trim cover lower J-clip followed by the installation of the lumbar adjust handle and screw (if present) and then install the head restraint guides with the head restraint and repower the SRS system.

How to Service the Rear 40 Percent Backrest Seat Cover on Ford Taurus?

Starting the Taurus and Sable 40 percent rear seat backrest cover servicing begins with removing the 40 percent seat backrest. The first step requires pushing the head restraint adjust button toward you to free the head restraint assembly. The J-clip at the bottom of the backrest trim cover should be released so you can remove the hook-and-loop strips on the back side of the trim cover. The service procedure requires bushing removal with precision to maintain the hook-and-loop strip attachment between the seat backrest foam and the trim cover. You should first release the hook-and-loop straps then turn over the backrest trim cover before removing the three sets of hog rings while the cover faces the head restraint guide. Use the backrest trim cover to pull the latch release strap before lifting the backrest foam pad to pinch the head restraint guide and take out both guides. To install the new backrest cover the reverse steps from removal must be followed.

OEM Ford Taurus Seat Cover

Car Seat Protector Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

214 Seat Covers found

View related parts
Ford Taurus Seat Back Cover, Charcoal Black, Front Driver Side Part Number: DG1Z-5464417-HB
$552.69 MSRP: $818.80
You Save: $266.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Manufacturer Note: (JW)
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Seat Back Cover, Camel/Tan, Front Driver Side Part Number: 8A4Z-7464417-BB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Cushion Cover, Front Driver Side Part Number: AG1Z-5462901-DB
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Left
- Manufacturer Note: (PS)
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Seat Back Cover, Charcoal Black, Front Driver Side Part Number: DG1Z-5464417-JB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Manufacturer Note: (PW)
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Seat Cover, Charcoal, Front Passenger Side Part Number: 6F1Z-5462900-AC
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Right
- Manufacturer Note: R.H., FROM 7/20/05
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Taurus | SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Cushion Cover, Black, Front Driver Side Part Number: AG1Z-5462901-EB
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Left
- Manufacturer Note: (QN)
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Cushion Cover, Charcoal Black, Front Driver Side Part Number: DG1Z-5462901-JB
$345.48 MSRP: $507.32
You Save: $161.84 (32%)
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (PW)
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Seat Back Cover, Front Part Number: 1F1Z-5464416-DAB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford Taurus | LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Back Cover, Driver Side Part Number: 1F1Z-5464417-DAB
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: L.H., w/side impact air bag
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford Taurus | LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Cover, Rear Part Number: 3F1Z-5463804-AAB
Product Specifications
- Other Name: Cover Assembly - Rear Seat; Seat Cover, Rear; Cover Assembly - Rear Seat Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Taurus | SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Cover, Rear Part Number: 3F1Z-5463804-CAB
Product Specifications
- Other Name: Cover Assembly - Rear Seat; Seat Cover, Rear; Cover Assembly - Rear Seat Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Taurus | SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Cover Part Number: 3F1Z-5463822-AAB
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: front center seat console - includes cover, plate and retainers
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Back Cover, Front Passenger Side Part Number: 5F1Z-5464416-AAB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Taurus | SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Back Cover, Front Passenger Side Part Number: 5F1Z-5464416-BAB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Taurus | SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Back Cover, Front Passenger Side Part Number: 5F1Z-5464416-EAB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Back Cover, Front Passenger Side Part Number: 5F1Z-5464416-FAB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Back Cover, Front Driver Side Part Number: 5F1Z-5464417-AAB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Taurus | SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Back Cover, Front Driver Side Part Number: 5F1Z-5464417-BAB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Taurus | SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Back Cover, Front Driver Side Part Number: 5F1Z-5464417-EAB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Seat Back Cover, Rear Passenger Side Part Number: 5F1Z-5466600-BAA
Product Specifications
- Other Name: Cover Assembly - Rear Seat; Seat Back Cushion Cover, Rear Right; Cover Assembly - Rear Seat Back
- Manufacturer Note: R.H., FROM 9/20/04
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Taurus | SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

| Page 1 of 11 |Next >

1-20 of 214 Results

Ford Taurus Seat Cover

OEM Seat Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Cover with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Taurus Seat Cover stands as an essential addition which protects the interior space of any Ford Taurus model while being famous for its reliability during usage. These seat covers have been engineered to work exclusively with Taurus models for protecting the vehicle's factory upholstery against wear and damage and spills which extends both its sales value and visual quality. The Ford Taurus established its position in automotive history by transforming American production after 1985 and the Seat Cover fulfills an essential function to sustain durability while adding comfort to the vehicle. A protective layer from the Ford Taurus Seat Cover safeguards both seat quality and vehicle operational ability and security. Multiple styles exist in this design range of Seat Covers to match the changing models of the car consequently making them appropriate for varied generations. Ford model Seat Cover creates market appeal through its special features including easy installation process and durable material construction with a perfect fit that targets consumers who value both practicality and design thetics. The car Seat Cover represents the automaker's long-standing dedication to quality and innovation because it presents an essential fit for any enthusiast of the car model.

Ford Taurus Seat Cover Parts and Q&A

Seat Cover, Camel/Tan, Front Passenger Side
8A4Z-7462900-BB
Q: How to service the front seat backrest seat cover on Ford Taurus?
A:
The service process for front seat backrest covers starts with depowering the SRS system followed by removing both head restraint and head restraint screws. Before proceeding further you should remove the screw and also remove the lumbar adjust handle when present. Handle the separation of the seat backrest trim cover from the hook-and-loop strip with great care because excessive force may result in tearing the cover. Start by releasing both J-clips and hook-and-loop strips from the bottom of the backrest trim cover and then carefully move it inside out up to the first front hog ring. The passenger seat backrest latch fold-flat release strap must pass through the bezel opening in the trim cover. To remove the seat backrest trim cover, first take out the first ring of hog rings and then cut off the hook-and-loop strip before turning the trim inside out. Finally remove the second row of hog rings. Unfasten the J-clips suspended from the trim cover at its rear section along with those securing the side Air Bag module backrest trim cover chute implementation. Thread the J-clip retainers along with the chute through the opening on the backrest foam pad of the side air bag module. Detach the hook-and-loop strips in front while you roll down the backrest trim cover then unfasten hog rings from the rear. Uninstall the head restraint guide by undoing the tabs which secure it. The installation process requires the backrest trim cover to rest on the backrest foam pad and frame before adding the hog rings. Place the duon tube above the wire hooks of the lumbar support before letting the cover roll down to reach the side air bag module. An inspection of the seat deployment chute should be performed for any damage. In case of damage the whole unit needs replacement. A thorough check must be performed on both the side air bag module and its mounting surfaces for damage alongside foreign particles which should be cleaned out. Insert the side air bag module backrest trim cover chute through the foam pad opening while passing its J-clip retainers afterward. Install the chute and retainers to encircle the side air bag module and backrest frame. Begin by adding the J-clips at the back edge of the trim cover then fasten the hook-and-loop strips and secure the second and first rows of hog rings from the front. To prepare the fold-flat feature on passenger seats push the backrest latch release strap through its opening located on the bezel. Complete the installation sequence by attaching the backrest trim cover lower J-clip followed by the installation of the lumbar adjust handle and screw (if present) and then install the head restraint guides with the head restraint and repower the SRS system.
Seat Back Cover, Gray, Rear Passenger Side
8G1Z-5466600-AA
Q: How to Service the Rear 40 Percent Backrest Seat Cover on Ford Taurus?
A:
Starting the Taurus and Sable 40 percent rear seat backrest cover servicing begins with removing the 40 percent seat backrest. The first step requires pushing the head restraint adjust button toward you to free the head restraint assembly. The J-clip at the bottom of the backrest trim cover should be released so you can remove the hook-and-loop strips on the back side of the trim cover. The service procedure requires bushing removal with precision to maintain the hook-and-loop strip attachment between the seat backrest foam and the trim cover. You should first release the hook-and-loop straps then turn over the backrest trim cover before removing the three sets of hog rings while the cover faces the head restraint guide. Use the backrest trim cover to pull the latch release strap before lifting the backrest foam pad to pinch the head restraint guide and take out both guides. To install the new backrest cover the reverse steps from removal must be followed.