How to service and repair the Water Pump on Ford Taurus?

The service and repair operations for the coolant pump begin by draining the cooling system contents. The 4 bolts securing the coolant pump pulley require loosening before detaching the accessory drive belt. You should now eliminate the degas bottle and the generator from their positions. Starting with bolt removal, you should take out the nut then roll restrictor and bracket before removing bolt and accessory drive belt tensioner. The service begins by removing the nut and bolt with support bracket before moving on to detach the 4 bolts and coolant pump pulley. The necessary steps to remove the coolant pump include unplugging the crankshaft sensor electrical connector and the coolant pump inlet hose followed by the removal of 10 bolts and 2 stud bolts and the coolant pump itself. Before installing the 10 bolts together with the 2 stud bolts onto the coolant pump position its sealing surfaces properly. Tighten bolts from 1 through 7 to 25 Nm (18 ft. lbs.) and bolts 8 through 12 to 10 Nm (89 inch lbs.). After you connect the coolant pump inlet hose to its proper location and reconnect the crankshaft sensor, you must install the 4 bolts and the coolant pump pulley without tightening them. You should install the accessory drive belt tensioner followed by tightening it to 25 Nm (18 ft. lbs.) after which the support bracket and bolt along with nut receive the same torque value for installation. Install the bolt, nut and roll restrictor with the bracket before securing the nut to 25 Nm (18 ft. lbs.) and the bolt to 47 Nm (35 ft. lbs.). Replace all components by reinstalling the generator together with the degas bottle and accessory drive belt. The 4 coolant pump pulley bolts require a torque of 25 Nm (18 ft. lbs.) then the cooling system requires filling and bleeding.

OEM Ford Taurus Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Water Pumps found

View related parts
Ford Taurus Water Pump Part Number: AA5Z-8501-D
$99.40 MSRP: $160.36
You Save: $60.96 (39%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump Assembly; Engine Water Pump; Water Pump Assembly
- Replaced by: AA5Z-8501-F
- Replaces: 7T4Z-8501-D, AA5Z-8501-A, 7T4Z-8501-C, PW-495, PW-489, PW-498
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Water Pump Part Number: 5F1Z-8501-A
$68.95 MSRP: $113.45
You Save: $44.50 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 1F1Z-8501-AA, PW-404, XF1Z-8501-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2007 Ford Taurus | G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Water Pump Part Number: 4S4Z-8501-E
$49.92 MSRP: $79.27
You Save: $29.35 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 6M8Z-8501-AC, PW-447, 1S7Z-8501-AK, 4S4Z-8501-AA, 4S4Z-8501-D, PW-465
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Water Pump Part Number: 1S7Z-8501-K
$48.09 MSRP: $76.36
You Save: $28.27 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 1S7Z-8501-A, 1S7Z-8501-D, PW-501, PW-572
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Water Pump Part Number: F5DZ-8501-CL
$60.89 MSRP: $84.23
You Save: $23.34 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: F7DZ-8501-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2000 Ford Taurus | LX, SE, SE Comfort, SEL, SVG | 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Water Pump Part Number: F4PZ-8501-A
$10.42 MSRP: $14.42
You Save: $4.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1995 Ford Taurus | GL, L, LX, SE, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Water Pump Part Number: F4DZ-8501-A
$23.34 MSRP: $32.29
You Save: $8.95 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Ford Taurus | GL, LX, SE | 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Water Pump Part Number: 5L8Z-8501-AA
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Manufacturer Note: Water Pump Driven By Intake Camshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Taurus | SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Water Pump Part Number: F3DZ8501A
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1995 Ford Taurus | SHO | 6 Cyl 3.2 L GAS
View related parts
Ford Taurus Water Pump Part Number: XS2Z-8501-EA
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Taurus | SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Water Pump Part Number: DG1Z-8501-D
$101.61 MSRP: $161.35
You Save: $59.74 (38%)
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump Assembly; Engine Water Pump; Water Pump Assembly
- Replaces: AT4Z-8501-B, AA5Z-8501-C, AT4Z-8501-CA, PW-566, DG1Z-8501-C, DG1Z-8501-B, DG1Z-8501-A, PW-518, PW-533, PW-531
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Water Pump Part Number: F6DZ8501B
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | SHO | 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Water Pump Part Number: E8DZ-8501-B
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1993 Ford Taurus | GL, L, LX | 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Water Pump Part Number: E8DZ-8501-A
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Neutral Safety Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1991 Ford Taurus | GL, L, LX | 6 Cyl 3.8 L GAS

Ford Taurus Water Pump

OEM Water Pump boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Water Pump with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Water Pump in Ford Taurus automobiles is responsible for the circulation of coolants in the engine block beginning from the radiator that causes heat produced during the combustion process. A belt-driven water pump with an impeller is used in most of the Taurus models to pump the coolant in and out of the engine block and going to the radiator. Historically people used cast iron pumps but the Taurus vehicles these days have aluminum water pumps that work better. The failing of water pump has indications of leakage of coolant, unusual noise emanating from the bearings, and overheating of the car's engine. To improve high-performance Taurus engines, it is highly recommended to select performance water pump since coolant flow could be enhanced and the parasitic horsepower loss could be cut down, and people who prefer the stock truck pumps could choose the cast iron pumps which are modified from the original and people who prefer the custom ones could select aluminum water pumps. There are also electric water pumps for Taurus vehicles with options including coolant circulation, post engine shutdown cooling, as well as remote pump options that are compact.

Ford Taurus Water Pump Parts and Q&A

Water Pump
5F1Z-8501-A
Q: How to service and repair the Water Pump on Ford Taurus?
A:
The service and repair operations for the coolant pump begin by draining the cooling system contents. The 4 bolts securing the coolant pump pulley require loosening before detaching the accessory Drive Belt. You should now eliminate the degas bottle and the generator from their positions. Starting with bolt removal, you should take out the nut then roll restrictor and bracket before removing bolt and accessory drive belt tensioner. The service begins by removing the nut and bolt with support bracket before moving on to detach the 4 bolts and coolant pump pulley. The necessary steps to remove the coolant pump include unplugging the crankshaft sensor electrical connector and the coolant pump inlet hose followed by the removal of 10 bolts and 2 stud bolts and the coolant pump itself. Before installing the 10 bolts together with the 2 stud bolts onto the coolant pump position its sealing surfaces properly. Tighten bolts from 1 through 7 to 25 Nm (18 ft. lbs.) and bolts 8 through 12 to 10 Nm (89 inch lbs.). After you connect the coolant pump inlet hose to its proper location and reconnect the crankshaft sensor, you must install the 4 bolts and the coolant pump pulley without tightening them. You should install the accessory drive belt tensioner followed by tightening it to 25 Nm (18 ft. lbs.) after which the support bracket and bolt along with nut receive the same torque value for installation. Install the bolt, nut and roll restrictor with the bracket before securing the nut to 25 Nm (18 ft. lbs.) and the bolt to 47 Nm (35 ft. lbs.). Replace all components by reinstalling the generator together with the degas bottle and accessory drive belt. The 4 coolant pump pulley bolts require a torque of 25 Nm (18 ft. lbs.) then the cooling system requires filling and bleeding.