How to service and repair the Trunk Lid Lift Support on Ford Edge?

A service repair of the power liftgate rod requires the removal of the LH quarter trim panel access cover. Press the clip on the power liftgate rod to disengage it from the motor assembly then raise the rod assembly while freeing it away. The service team must remove the cover along with its retaining nut while using threadlock to treat all fastener threads before securing it at 11 Nm (97 lb-in). You must take out the three power liftgate rod mounting bracket nuts before installation although you should securely tighten them to 30 Nm (22 lb-ft). To install and activate the power liftgate execute the opposite instructions of the removal sequence.

How to service and repair the Trunk Lid Lift Support on Ford Expedition?

The first step to fix the power liftgate rod involves removing the LH quarter trim panel. The service requires unclipping the power liftgate rod from the motor assembly by pressing on the clip to free it while moving it to the top of the rod assembly. Secure the retaining nut between the power liftgate rod and liftgate by applying threadlock to its threads. Then install it with 11 Nm of torque (97 lb-in). After taking out the power liftgate rod-to-bracket bolt and power liftgate rod assembly, you need to install them with a torque of 30 Nm (22 lb-ft). Conclude the repair by completing the reverse procedures followed by power liftgate landing.

OEM Ford Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

139 Trunk Lid Lift Supports found

View related parts
Ford Lift Cylinder, Rear Passenger Side Part Number: CJ5Z-78406A10-B
$144.61 MSRP: $232.22
You Save: $87.61 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Rear Right Liftgate Support; Back Glass Tailgate Door Support; Support Cylinder; Liftgate Lift Support; Lift Support
- Manufacturer Note: RH Only
- Position: Rear Passenger Side
Fits the following Ford Models:
- Escape | 2013-2019 | S, SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Support Cylinder, Rear Passenger Side Part Number: BB5Z-78406A10-C
$145.29 MSRP: $211.48
You Save: $66.19 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Liftgate Lift Support, Rear Right; Hatch Lift Support; Tailgate Lift Support; Liftgate Lift Support; Lift Support
- Manufacturer Note: RH Only
- Position: Rear Passenger Side
Fits the following Ford Models:
- Explorer | 2011-2015 | Base, Limited, Sport, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS
- Police Interceptor Utility | 2013-2015 | Base | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
View related parts
Ford Lift Cylinder, Passenger Side Part Number: GB5Z-78406A10-A
$140.13 MSRP: $203.97
You Save: $63.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch, Back Glass, Liftgate, Tailgate, and Door Lift Supports.; Support Cylinder; Lift Support
- Manufacturer Note: RH Only
- Position: Passenger Side
Fits the following Ford Models:
- Explorer | 2016-2019 | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
- Police Interceptor Utility | 2016-2019 | Base | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
View related parts
Ford Lift Cylinder Part Number: FT4Z-58406A10-B
$159.83 MSRP: $232.65
You Save: $72.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch, Back Glass, Liftgate, Tailgate, and Door Lift Supports.; Support Cylinder; Lift Support
- Manufacturer Note: RH Only
Fits the following Ford Models:
- Edge | 2015-2018 | SEL, Sport, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Lift Cylinder, Rear Part Number: F4TZ-78406A10-A
$44.68 MSRP: $65.03
You Save: $20.35 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Liftgate Lift Support, Rear; Back Glass Lift Support; Tailgate Lift Support; Door Lift Support; Support Cylinder; Liftgate Lift Support; Lift Support
- Position: Rear
- Replaces: F1TZ-78406A10-B, F1TZ-78406A10-A
Fits the following Ford Models:
- Explorer | 1991-2001 | Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
- Explorer Sport | 2001-2003 | Base, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Lift Cylinder, Passenger Side Part Number: FT4Z-58406A10-C
$159.83 MSRP: $232.65
You Save: $72.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch, Back Glass, Liftgate, Tailgate, and Door Lift Supports.; Support Cylinder; Lift Support
- Position: Passenger Side
Fits the following Ford Models:
- Edge | 2015-2018 | SEL, Sport, Titanium | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Lift Cylinder, Passenger Side Part Number: FB5Z-78406A10-B
$45.29 MSRP: $72.73
You Save: $27.44 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch, Back Glass, Liftgate, Tailgate, and Door Lift Supports.; Support Cylinder; Lift Support
- Position: Passenger Side
- Replaces: FB5Z-78406A10-A
Fits the following Ford Models:
- Explorer | 2016-2019 | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
- Police Interceptor Utility | 2016-2019 | Base | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
View related parts
Ford Lift Cylinder, Rear Driver Side Part Number: BB5Z-78406A11-A
$52.51 MSRP: $75.12
You Save: $22.61 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Rear Left Liftgate Support; Back Glass Support; Tailgate Support; Door Support; Support Cylinder; Liftgate Lift Support; Lift Support
- Position: Rear Driver Side
Fits the following Ford Models:
- Explorer | 2011-2015 | Base, Limited, Sport, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS
- Police Interceptor Utility | 2013-2015 | Base | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
View related parts
Ford Lift Cylinder, Rear Part Number: 5S4Z-61406A10-A
$29.50 MSRP: $41.85
You Save: $12.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Liftgate Lift Support, Rear; Back Glass Lift Support; Tailgate Lift Support; Door Lift Support; Support Cylinder; Liftgate Lift Support; Lift Support
- Manufacturer Note: RH/LH
- Position: Rear
- Replaces: 3S4Z-61406A10-AA, YS4Z-61406A10-AA, XS4Z-61406A10-AA
Fits the following Ford Models:
- Focus | 2000-2007 | LX, S, SE, SES, Sony Limited Edition, SVT, ZTS, ZX3, ZX4, ZX4 ST, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Lift Cylinder, Rear Driver Side Part Number: 8L8Z-78406A11-A
$31.38 MSRP: $45.68
You Save: $14.30 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Liftgate Support, Left Rear; Back Glass Support; Tailgate Support; Door Support; Support Cylinder; Liftgate Lift Support; Lift Support
- Position: Rear Driver Side
Fits the following Ford Models:
- Escape | 2008-2012 | Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Lift Cylinder, Rear Passenger Side Part Number: LJ6Z-14B350-C
$124.55 MSRP: $191.67
You Save: $67.12 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Motor; Liftgate Lift Support, Rear Right; Actuator
- Position: Rear Passenger Side
- Replaced by: LJ6Z-14B350-D
Fits the following Ford Models:
- Escape | 2020-2023 | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Lift Cylinder, Passenger Side Part Number: LJ8Z-58406A10-B
$79.99 MSRP: $116.43
You Save: $36.44 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Damper
- Position: Passenger Side
- Replaces: LJ8Z-58406A10-A
Fits the following Ford Models:
- Mustang Mach-E | 2021-2023 | California Route 1, First Edition, GT, Premium, Select | BATTERY EV (EV/BEV)
View related parts
Ford Lift Cylinder, Driver Side Part Number: LJ6Z-14B351-D
$284.66 MSRP: $418.00
You Save: $133.34 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Motor; Actuator
- Position: Driver Side
- Replaced by: LV4Z-14B351-H
Fits the following Ford Models:
- Escape | 2020-2023 | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Lift Cylinder, Passenger Side Part Number: F32Z-61406A10-A
$116.45 MSRP: $169.50
You Save: $53.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
- Manufacturer Note: RH, w/o spoiler, with M/T, without wiper
- Position: Passenger Side
Fits the following Ford Models:
- Probe | 1993-1995 | Base, GT, SE | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Ford Lift Cylinder, Passenger Side Part Number: JL1Z-78406A10-A
$57.25 MSRP: $83.33
You Save: $26.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch Lift Support, Right; Back Glass Lift Support; Liftgate Lift Support; Tailgate Lift Support; Support Cylinder; Lift Support
- Position: Passenger Side
Fits the following Ford Models:
- Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Damper Part Number: JT4Z-5806200-A
$62.57 MSRP: $91.08
You Save: $28.51 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stop; Glove Box Support
Fits the following Ford Models:
- Edge | 2020-2024 | SE, SEL, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Lift Cylinder, Rear Part Number: FR3Z-63406A10-B
$30.10 MSRP: $42.70
You Save: $12.60 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Trunk Lid Lift Support, Rear; Deck Lid Lift Support; Liftgate Lift Support; Tailgate Lift Support; Support Cylinder; Trunk Lid Lift Support; Lift Support
- Manufacturer Note: RH/LH
- Position: Rear
Fits the following Ford Models:
- Mustang | 2015-2023 | Bullitt, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Lift Cylinder, Rear Part Number: F4ZZ-63406A10-B
$89.64 MSRP: $130.48
You Save: $40.84 (32%)
Product Specifications
- Other Name: Lift Assembly - Gas; Trunk Lid Lift Support, Rear; Liftgate Lift Support; Tailgate Lift Support; Support Cylinder; Trunk Lid Lift Support; Lift Support
- Manufacturer Note: Includes ball stud, GT
- Position: Rear
Fits the following Ford Models:
- Mustang | 1994-2004 | Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Lift Cylinder, Rear Part Number: 5S4Z-54406A10-BA
$26.67 MSRP: $37.83
You Save: $11.16 (30%)
Product Specifications
- Other Name: Lift Assembly - Gas; Trunk Lid Lift Support, Rear; Liftgate Lift Support; Tailgate Lift Support; Trunk Lid Lift Support; Lift Support
- Manufacturer Note: RH/LH
- Position: Rear
Fits the following Ford Models:
- Focus | 2005-2011 | S, SE, SEL, SES, ST, ZX4, ZX4 ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Lift Cylinder, Rear Part Number: CP9Z-58406A10-B
$31.71 MSRP: $44.98
You Save: $13.27 (30%)
Product Specifications
- Other Name: Lift Assembly - Gas; Liftgate Lift Support, Rear; Hatch Lift Support; Back Glass Lift Support; Door Lift Support; Liftgate Lift Support; Lift Support
- Manufacturer Note: RH/LH
- Position: Rear
Fits the following Ford Models:
- Focus | 2012-2018 | Electric, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)

| Page 1 of 7 |Next >

1-20 of 139 Results

Ford Trunk Lid Lift Support

If you own Ford and want to keep it in top shape, choosing OEM Trunk Lid Lift Support is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Ford Trunk Lid Lift Support at some of the affordable online prices without cutting quality. Every OEM Ford part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Ford Trunk Lid Lift Support is a gas-charged strut that provides counter reaction to your deck lid, allowing it to lift and be up in a safe manner and also to lower without any control. Practical innovation has been pursued at Ford since 1903, including the moving assembly line, which reduced the time to build by half, to EcoBoost engines that extract more power out of each drop of fuel. The Ford sheds pounds where it needs to, hardens frames where it has to, and allows drivers SYNC voice control to playlists and directions to do as it orders without taking their eyes off the road. When traffic is ugly, Ford Co-Pilot 360 intervenes, pressing the brakes or banging the wheel to keep you in your lane, as the all-electric F-150 Lightning emits no noises and no tailpipe. Even the greatly hard Ford components such as the Trunk Lid Lift Support possess that no-nonsense ethos in which the pressurized gas and closed bearings allow it to shrug off corrosion, temperature changes, and years of grocery trips. Replacement of a worn-out Trunk Lid Lift Support requires a few minutes, not hours, and requires only the use of a flat blade screwdriver. Park level, hold the lid using a stick, flick the retaining clips loose, and pop the worn strut off its ball studs. Install the new Trunk Lid Lift Support by snapping it onto the same studs with the cylinder facing the body, clicking the clips back, pulling the prop, and testing the lid by cycling it several times with a steady, firm movement devoid of hiss or sag.

Ford Trunk Lid Lift Support Parts and Q&A

Lift Cylinder, Rear Passenger Side
7T4Z-78406A10-A
Q: How to service and repair the Trunk Lid Lift Support on Ford Edge?
A:
A service repair of the power liftgate rod requires the removal of the LH quarter trim panel access cover. Press the clip on the power liftgate rod to disengage it from the motor assembly then raise the rod assembly while freeing it away. The service team must remove the cover along with its retaining nut while using threadlock to treat all fastener threads before securing it at 11 Nm (97 lb-in). You must take out the three power liftgate rod mounting bracket nuts before installation although you should securely tighten them to 30 Nm (22 lb-ft). To install and activate the power liftgate execute the opposite instructions of the removal sequence.
Lift Cylinder, Rear Passenger Side
7L1Z-78406A10-B
Q: How to service and repair the Trunk Lid Lift Support on Ford Expedition?
A:
The first step to fix the power liftgate rod involves removing the LH quarter trim panel. The service requires unclipping the power liftgate rod from the motor assembly by pressing on the clip to free it while moving it to the top of the rod assembly. Secure the retaining nut between the power liftgate rod and liftgate by applying threadlock to its threads. Then install it with 11 Nm of torque (97 lb-in). After taking out the power liftgate rod-to-bracket bolt and power liftgate rod assembly, you need to install them with a torque of 30 Nm (22 lb-ft). Conclude the repair by completing the reverse procedures followed by power liftgate landing.