Other Name: Weatherstrip - Door Belt; Door Window Belt Weatherstrip, Rear Right Inner; Weatherstrip
Manufacturer Note: (RH)
Position: Rear Inner Passenger Side
Fits the following Ford Models:
Expedition | 2018-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Other Name: Weatherstrip; Door Seal, Rear Left Forward, Rear Left Rearward; Door Seal
Position: Rear Driver Side
Fits the following Ford Models:
Expedition | 2018-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Q: How to Service and Repair the Rear Door Window Glass Weather Strip on Ford Edge?
A: The first step to service and repair the rear door window glass weather strip starts with removing the rear door glass since the bracket detachment occurs at that time. The next step requires removal of the top run from the rear door glass. You must follow all the steps that you took for removal when reinstalling the parts.
Q: How to Service and Repair the Front Door Window Glass Weather Strip on Ford Escape?
A: Start the front door window glass weather strip service and repair operations by taking off the front door window glass together with the front door interior sail panel. Car owners need to disconnect the electrical connector of the speaker system when the vehicle has built-in speakers. The service starts with taking out the two front door glass top run bolts but tighten them to 6 Nm (53 lb-in) during assembly. The glass top run should then be removed before executing the reverse of the removal steps for final reinstallation.
Q: How to Address Issues with the Weather Strip on the Front Door Window Glass of a Ford Focus?
A: The first step to service and repair the front door window glass weather strip requires elimination of both front door window glass and front door sail panel. It is necessary to disconnect electrical connectors on vehicles if they are present during this phase of work. Proceed by taking the interior weather strip off the front door then remove the front door glass top run. The process completion requires reverting the steps of removal to reinstall all components.