Other Name: Door - Fuel Tank Filler Access; Fuel Filler Door, Rear
Position: Rear
Fits the following Ford Models:
Fusion | 2013-2020 | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
Police Responder Hybrid | 2019-2020 | Base | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV)
SSV Plug-In Hybrid | 2019-2020 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to service the Fuel Door cup bezel on Ford Expedition?
A: When replacing the gas filler door cup bezel, be careful to remember that it is single use and cannot be removed. Hold a non-marring tool and push outwards on the right and left sides on the upper part till the clips break. Fit the new bezel in the slots and press it, until the clips are firmly connected.
Q: How to service the Fuel Door cup bezel on Ford Explorer Sport Trac?
A: Tape the door around to avoid damaging the door in order to service the fuel filler door cup bezel. Take off screws and rearrange door. Take a pick tool, with a 90 degree angle, to release the upper and lower right clips and then pull the bezel out and up until it comes off entirely.