Other Name: Handle Assembly - Door Outer; Deck Lid Finish Panel, Rear Upper; Handle Assembly - Door - Outer
Manufacturer Note: Paint to match
Position: Rear Upper
Fits the following Ford Models:
Fusion | 2019-2020 | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
Police Responder Hybrid | 2019-2020 | Base | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV)
SSV Plug-In Hybrid | 2019-2020 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Handle - Luggage Compartment; Deck Lid Finish Panel, Rear Upper; Handle - Tailgate
Manufacturer Note: Paint to match
Position: Rear Upper
Replaces: DS7Z-5443400-AA
Fits the following Ford Models:
Fusion | 2013-2016 | Energi SE, Energi Titanium, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
Q: How to service the Tailgate Handle release on Ford F-150?
A: Opening and holding up the tailgate should be the first step before servicing the tailgate handle. Start the process by taking out the components according to their installation order. Open the clip securing the left-hand actuating rod at the handle to let it free to detach from the rod locator on the tailgate. During right-hand tailgate handle actuating rod service follow similar steps by opening the clip to detach the rod from the handle and remove the rod locator from the tailgate. Reinstall the system by following the opposite steps of removal.
Q: How to service the Tailgate Handle release on Ford Excursion?
A: You should start handling a tailgate handle service by opening the tailgate then removing the access panel with screws. You must disconnect the tailgate actuating rods from the remote control by both unscrewing clips and taking out the rods. First detach the nuts before removing the handle after which you must take away the tailgate latch remote control. Follow the opposite sequence you used for removal to install the components. New component installation requires consultation of the Ford Master Parts Catalog to obtain specific part specifications.
Q: How to service and repair the Tailgate Handle on Ford Ranger?
A: The service process of tailgate handle begins with unscrewing the tailgate access cover and removing all its screws. Remote control rods must be detached from the tailgate latch by opening the clips and removing the rods. You should first remove the tailgate latch remote control nuts then separate the tailgate handle from its position. Follow the reverse order of steps used for removal to conduct the installation.