How Critical is Proper Orientation of the Air Bag Sensor for Correct System Operation on Ford Windstar?

Correct system operation depends on the right orientation of the vehicle sensor during impact sensor servicing. An inspection of the sensor mounting bracket and wiring pigtail needs to take place after a collision with a vehicle containing an air bag supplemental restraint system (SRS) to check for deformation and the sensor and any SRS component must be properly located and replaced in case of damage whether air bags were deployed or not. All personal safety measures must start with disconnecting the ground cable from the battery power supply and allowing it to sit for one full minute before reconnection. This process must also include disconnection of any auxiliary battery or power supply systems if present. The side crash sensors rest underneath the carpet that lies beneath the front seats. Start by removing the battery ground cable before you detach the front seat from the vehicle while moving the carpet to reach the side crash sensor. The process for removing the side crash sensor includes disconnecting its electrical connector and removing the push pin from the wiring harness and bolts followed by removing the side crash sensor with bracket. Install the air bag side crash sensor by following the uninstallation sequence in reverse order while keeping the proper bolt torque for correct system functionality. The completed air bag system needs to undergo a proving process. The restraint system diagnostic tool exists only for maintenance tasks during which the device must be removed from vehicles before road use because safety standards could be broken or people can get hurt.

OEM Ford Windstar Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Air Bag Sensors found

View related parts
Ford Windstar Front Sensor Part Number: F58Z14B004D
$60.69 MSRP: $82.58
You Save: $21.89 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor; Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Sensor Part Number: F58Z14B004C
$59.58 MSRP: $81.08
You Save: $21.50 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Windstar | Base, GL, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Side Impact Sensor Part Number: XF2Z-14B345-AA
$92.10 MSRP: $125.33
You Save: $33.23 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Sensor; Side Sensor
- Manufacturer Note: RH or LH , sensor and bracket , side impact air bag
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Ford Windstar | 3.0L, Base, Limited, LX, SE, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Control Module Part Number: YF2Z-14B321-AA
$226.09 MSRP: $310.20
You Save: $84.11 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: w/o seat air bags, FROM 12/24/99
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Ford Windstar | 3.0L, Base, Limited, LX, SE, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Control Module Part Number: 1F2Z-14B321-CB
$204.92 MSRP: $283.49
You Save: $78.57 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: w/o seat air bags, without Occupant Classification Sensor (sensor in seat), BEFORE 5/21/01
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Windstar | Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Front Sensor Part Number: F58Z14B004B
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor; Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Windstar | Base, GL, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Side Impact Sensor Part Number: 2F2Z-14B345-AA
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Sensor; Side Sensor
- Manufacturer Note: RH or LH - sensor and bracket, side impact air bag
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Windstar | Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Control Module Part Number: 1F2Z-14B321-DB
Product Specifications
- Other Name: Sensor Assembly - Airbag; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: w/seat air bags, without Occupant Classification Sensor (sensor in seat), BEFORE 5/21/01
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Windstar | Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Front Sensor Part Number: F68Z-14B004-AA
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor; Sensor
- Manufacturer Note: FROM 8/96
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Front Sensor Part Number: F58Z-14B004-A
Product Specifications
- Other Name: Air Bag Sensor; Sensor; Sensor Assembly
- Manufacturer Note: RH or LH, BEFORE 8/94
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Windstar | Base, GL, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Front Sensor Part Number: 2F2Z-14B004-AA
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor
- Manufacturer Note: Front sensor
- Replaces: 1F2Z-14B004-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Windstar | Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Control Module Part Number: YF2Z-14B321-BA
Product Specifications
- Other Name: Sensor Assembly - Airbag; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: w/seat air bags, FROM 12/24/99
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Ford Windstar | 3.0L, Base, Limited, LX, SE, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

Ford Windstar Air Bag Sensor

OEM Air Bag Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Air Bag Sensor with long life and a perfect fit. Come to our website and find genuine Ford Windstar parts. We keep a wide inventory of OEM Windstar parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Windstar Air Bag Sensor is an essential device, the proper working of which is significant for creating conditions for safe driving of cars of the Ford Windstar brand that was manufactured from 1995 to 2007. This is an essential Air Bag Sensor or crash sensor which it has the responsibility of sensing an impact during an accident and relay the signal to the control unit to release the air bags. This timely activation also dramatically increases the vehicle's reliability for passengers, thus making the Ford Windstar a reliable family car. Air Bag Sensor is compatible with different models of Windstar; hence, every type of this minivan continues performing its safety function of protecting its occupants. The Ford Windstar Air Bag Sensor is manufactured with great accuracy to match the reputation of the brand's products. The compact design makes it easy to run and as an added bonus helps in enhancing safety of the car. In particular, It is important to mention that compared to its rivals, the Ford Windstar was not only the first North American-made van, but this model was successfully exported to Europe as well inaugurating Ford's globalization strategy and the outstanding quality of its engineering. Since this Air Bag Sensor can integrate the interface and protocol of Air Bag Modules in different generations of Windstar vehicle brands, it proves to be essential for the automotive industry. This part includes Ford Windstar Air Bag Sensor with front-seat side airbags and advanced crash detection, which would be the indication that Ford cares for its consumers by providing safety instruments on their car models. Therefore, it can be concluded that the Ford Windstar Air Bag Sensor is a component that is critical to the vehicle's work and adds value to the model Ford Windstar.

Ford Windstar Air Bag Sensor Parts and Q&A

Control Module
YF2Z-14B321-AA
Q: How Critical is Proper Orientation of the Air Bag Sensor for Correct System Operation on Ford Windstar?
A:
Correct system operation depends on the right orientation of the vehicle sensor during impact sensor servicing. An inspection of the sensor mounting bracket and wiring pigtail needs to take place after a collision with a vehicle containing an air bag supplemental restraint system (SRS) to check for deformation and the sensor and any SRS component must be properly located and replaced in case of damage whether air bags were deployed or not. All personal safety measures must start with disconnecting the ground cable from the battery power supply and allowing it to sit for one full minute before reconnection. This process must also include disconnection of any auxiliary battery or power supply systems if present. The side crash sensors rest underneath the carpet that lies beneath the front seats. Start by removing the battery ground cable before you detach the front seat from the vehicle while moving the carpet to reach the side crash sensor. The process for removing the side crash sensor includes disconnecting its electrical connector and removing the push pin from the wiring harness and bolts followed by removing the side crash sensor with bracket. Install the air bag side crash sensor by following the uninstallation sequence in reverse order while keeping the proper bolt torque for correct system functionality. The completed air bag system needs to undergo a proving process. The restraint system diagnostic tool exists only for maintenance tasks during which the device must be removed from vehicles before road use because safety standards could be broken or people can get hurt.