Manufacturer Note: 24"blade, driver side, Standard , windshield
Position: Driver Side
Fits the following Ford Models:
Windstar | 1995-2003 | 3.0L, Base, GL, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
| Page 1 of 8 |Next >
1-20 of 146 Results
Ford Wiper Blade
OEM Wiper Blade boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Wiper Blade with long life and a perfect fit. Come to our website and find genuine Ford parts. We keep a wide inventory of OEM parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.
Q: How to service the rear wiper blade on Ford Escape?
A:
Before servicing the rear wiper blade users should protect both the wiper arm and glass surface by avoiding excessive wiper arm movement that would snap it against the glass. Start by grasping the wiper arm next to its pivot joint and pull it so it reaches maximum angle position. Hold the wiper blade main structure directly by your other hand near its pivoting point. Pressure should be applied to the joint directly from the bottom to detach the blade from the arm. Secure the new blade on the wiper arm by pressing it until you hear a snap which indicates correct installation.
Q: How to service and repair windshield wiper blades on Ford F-150?
A:
The starting point for wiper blade service and repair requires winding the wipers then placing them into the parked position. Check the specifications for the distance between right-hand (RH) windshield wiper blade center and bottom glass. Then verify the left-hand (LH) windshield wiper blade measurement. Proceed to remove the windshield wiper pivot arm after checking that one of the distance measurements does not meet the specifications. Separate the pivot arm from its position by removing the nut through the cover. You should remove the windshield wiper pivot arm before repositioning it according to needed specifications. The last step requires securing the windshield wiper pivot arm nuts tightly.