Other Name: Bushing; Suspension Control Arm Bushing, Front Upper; Suspension Control Arm Bushing Kit; Control Arm Bush Kit; Suspension Control Arm Bushing; Control Arm Bushing
Other Name: Bush; Suspension Control Arm Bushing; Control Arm Bushing; Lower Control Arm Center Bushing; Strut Rod Front Bushing; Tension Strut Bushing; Bushing; Bushings
Fits the following Lincoln Models:
Continental | 1995-2001 | Anniversary, Base, Diamond Anniversary, Signature, Spinnaker Edition | 8 Cyl 4.6 L GAS
Other Name: Bushing; Suspension Control Arm Bushing, Front; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Lower Control Arm Front Bushing; Bushings; Control Arm Bushing
Manufacturer Note: Serviced In 3078 Or 3079 As Needed
Position: Front
Replaces: BA5Z-3C377-A, BA5Z-3C377-B
Fits the following Lincoln Models:
MKS | 2009-2012 | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
MKT | 2010-2019 | Base, EcoBoost, Livery, Premiere, Reserve | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
Other Name: Bush - Front Suspension; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Shaft Bushings; Bushings; Bush - Front Suspension Arm
Fits the following Lincoln Models:
Continental | 1985-1987 | Base, Givenchy, Valentino | 8 Cyl 5.0 L GAS
Town Car | 1984-2002 | Anniversary, Base, Cartier, Cartier L, Cypress, Executive, Executive L, Jack Nicklaus, Signature, Signature SE, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
Q: How to service and repair the upper control arm bushing on Lincoln Aviator?
A: In order to service upper arm bushing, employ fresh fasteners of matching part number, following the same torque values when reassembling. Take out upper arm-to-frame bolts, flag nuts and bushing nut (tighten to 120 Nm). Installation Re-Installation Unscrewing the bolts to 80 Nm.
Q: How to service and repair the lower control arm bushing on Lincoln MKS?
A: To replace the lower arm bushing, unscrew the lower arm and will mark its location. Incidentally, separate the bushing using a Drive Pinion Bearing Cone Remover and press. To install, line the marks on the index of the new bushing with the lower arm and re-install lower arm with the same tools.