Other Name: Arm Assembly - Rear Suspension; Differential Mount, Rear; Mount Arm
Position: Rear
Replaces: 7L1Z-4612-A, 5L1Z-4612-AA
Fits the following Lincoln Models:
Navigator | 2007-2017 | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Other Name: Arm Assembly - Rear Suspension; Control Arm
Position: Rear Passenger Side
Fits the following Lincoln Models:
Town Car | 1990-1997 | Anniversary, Base, Cartier, Cypress, Executive, Jack Nicklaus, Signature, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
Q: How to service and repair the trailing arm on both front wheel drive (FWD) and all wheel drive (AWD) on Lincoln MKZ?
A: When servicing the trailing arm of a FWD or AWD vehicle, be sure the car is in neutral position on a hoist. Install and remove different bolts and components and torque them to required levels. Before re-installation, the jack can then be used to put the suspension in place. Lastly, verify and correct rear end alignment.
Q: How to service the upper trailing arm on Lincoln Navigator?
A: In order to service the upper trailing arm, take off the wheel and tire, then the bolts and flagnut. Check and change knuckle bushing as required. Install the upper trailing arm in a loose manner and then screw the bolts to particular torques. Suspension fastening parts should always be of equal quality.