OEM Lincoln LS A/C Condenser

Lincoln LS A/C Condenser Parts Questions & Experts Answers

• Condenser
  6W4Z-19712-A
  Q: How to Service and Repair the A/C Condenser on Lincoln LS?

  A: Start the HVAC condenser servicing process by disconnecting the battery followed by conducting the Refrigerant Discharging and Recovery Procedure. A leak test of the A/C condenser core must happen before it gets removed. Disconnect the air outlet tube from its position and detach the peanut fitting from the A/C compressor discharge line through the removal of the discharge line nut. Start by lifting the vehicle before removing screws that detach both the LH sight shield and the Air Deflector through side-clip retainer and push-pin removal. Complete the A/C receiver drier inlet line disconnection by untightening the nut first along with the LH bolt second. The condenser core gets supported before removal of both RH and LH bolts to lower the condenser core. Partial installation instructions entail a step-by-step reverse of removal operations while properly oiling the new A/C condenser core with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or its equivalent aqueous form which adheres to Ford standard WSH-M1C231-B. O-ring seals require an application of the same PAG Refrigerant Compressor Oil during installation. When changing an A/C condenser core it is essential to install a fresh receiver drier to stop system contamination.