How to repair and service the front backrest seat cover on Lincoln MKS?

Start your front seat backrest cover service or repair by taking out the seat backrest while having the live air bag module positioned away from the body using deployment door/trim cover/tear seam. Any damage to the front seat backrest trim covers requires replacement since this componentUnavailable for repair on vehicles equipped with side air bags. A side air bag deployment requires replacement of the seat backrest foam pad together with the backrest trim cover, deployment chute and side air bag module, and nuts and possibly a new seat backrest frame. The vehicle requires a functional and faultless Supplemental Restraint System (SRS) before returning to customers because the air bag warning indicator will activate when the correct Restraints Control Module (RCM) fuse is removed with the ignition turned ON. Pull the backrest panel sustainers from their bottom attachments using the same side of each guide sleeve to let the retainers disengage. Pivoting the panel bottom away from the seat ensures clip safety. J-clips on the backrest wires should be removed before you take off the rear carpet flap toe-kick and detach hook-and-loop strips from the backrest trim cover. Start by disconnecting the backrest trim cover J-clips which secure to the backrest frame wires at the top and then detach the backrest Thermo-Electric Device (TED) through disconnecting its electrical connector while separating the pin-type retainer. Following removal of the backrest trim cover foam pad the technician should push the cover inside out before removing every hog ring attached to the backrest frame. The backrest trim cover installation requires its inside-out placement onto the backrest foam pad followed by hog ring attachment at five locations for the top wire and six locations for the side wires. Check that the deployment chute aligns properly with clear exit routes within the seat side air bag module cavity then install the guide sleeves for the head restraint before inspection of the cavity for foreign material. The backrest trim cover goes around the foam pad and frame but you should fasten only the lower J-clips and the side J-clips at this time. The installation requires placing the backrest TED between the frame and foam pad to achieve a connection with the foam pad wire before connector attachment. Attachment of upper J-clips commences with the backrest frame wires followed by trim cover wrapping of the recliner and then hook-and-loop strip and J-clip securing procedures. Complete installation of the seat backrest involves pivoting the bottom first then sliding it upward until the upper retainers lock in while making sure all clips are correctly attached.

How to properly replace the rear seat cover while ensuring the installation of new cushion foam pads and cushion heater mats on Lincoln MKS?

The replacement of rear seat cushion cover demands simultaneous installation of new cushion foam pads and cushion heater mats which require their respective pair. Start by taking out the rear seat cushion from its position. You must remove the hog rings securing the cushion trim cover wires against the cushion foam pad wires from beneath the assembly before placing the heated seat mat wire harness under the draw string during installation. Be careful to detach the cushion trim cover from hook-and-loop strips to prevent damaging the cushion foam pad. Scrapping the hog rings enables you to detach the hook-and-loop strips before removing the cushion trim cover. The reverse procedure of removal steps needs to be performed to finish the process.

OEM Lincoln MKS Seat Cover

Car Seat Protector Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

74 Seat Covers found

View related parts
Lincoln MKS Cushion Cover, Driver Side Part Number: DA5Z-5462901-AA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (LD)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Black, Passenger Side Part Number: DA5Z-5464416-AB
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (LH)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Passenger Side Part Number: 8A5Z-5464416-DC
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (FV)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Camel, Driver Side Part Number: 8A5Z-5464417-DA
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (FJ)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Black, Driver Side Part Number: 8A5Z-5464417-DB
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (FW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Driver Side Part Number: 8A5Z-5464417-DC
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (FV)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Camel, Rear Part Number: 8A5Z-5466600-DA
Product Specifications
- Other Name: Cover Assembly - Rear Seat Back
- Manufacturer Note: (FJ)
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Black, Rear Part Number: 8A5Z-5466600-DB
Product Specifications
- Other Name: Cover Assembly - Rear Seat Back
- Manufacturer Note: (FW)
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Rear Part Number: 8A5Z-5466600-DC
Product Specifications
- Other Name: Cover Assembly - Rear Seat Back
- Manufacturer Note: (FV)
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Camel, Passenger Side Part Number: AA5Z-5464416-AA
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Position: Passenger Side
- Replaces: 8A5Z-5464416-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Black, Passenger Side Part Number: AA5Z-5464416-AB
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Position: Passenger Side
- Replaces: 8A5Z-5464416-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Passenger Side Part Number: AA5Z-5464416-AC
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Position: Passenger Side
- Replaces: 8A5Z-5464416-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Passenger Side Part Number: AA5Z-5464416-DA
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (FN)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Camel, Driver Side Part Number: AA5Z-5464417-BA
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Position: Driver Side
- Replaces: AA5Z-5464417-AA, 8A5Z-5464417-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Black, Driver Side Part Number: AA5Z-5464417-BB
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Position: Driver Side
- Replaces: 8A5Z-5464417-BB, AA5Z-5464417-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Driver Side Part Number: AA5Z-5464417-BC
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Position: Driver Side
- Replaces: 8A5Z-5464417-BC, AA5Z-5464417-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Driver Side Part Number: AA5Z-5464417-BD
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (FN)
- Position: Driver Side
- Replaces: AA5Z-5464417-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Seat Back Cover, Rear Part Number: AA5Z-5466600-BD
Product Specifications
- Other Name: Cover Assembly - Rear Seat Back
- Manufacturer Note: (FN)
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Cushion Cover, Camel, Passenger Side Part Number: CA5Z-5462900-AA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Cushion Cover, Passenger Side Part Number: CA5Z-5462900-AD
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (FN)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

| Page 1 of 4 |Next >

1-20 of 74 Results

Lincoln MKS Seat Cover

OEM Seat Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Cover with long life and a perfect fit. Come to our website and find genuine Lincoln MKS parts. We keep a wide inventory of OEM MKS parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Every Lincoln MKS owner needs the Lincoln MKS Seat Cover since it stands out for protecting the interior while maintaining the reliability and performance of the vehicle. This Seat Cover features a specific model design for MKS vehicles made between 2008 and 2016 thus it protects the original fabrics while improving both visual presentation and seating comfort of the Lincoln MKS. Vehicle owners have flexibility to customize their MKS through different color and design options which keeps the value intact and maintains the interior in a perfect state. Driving efficiency and vehicle safety reach their peak point with this Lincoln automobile Seat Cover because it fits securely to eliminate movement of the seat cover during transit. The Seat Cover uses strong materials made for everyday use since it presents both strength and convenience for cleaning. The Lincoln car Seat Cover stands unique in the automotive market because it includes exclusive attributes such as water-resistant fabric combined with reinforced stitching to fulfill luxury car owners' needs. The car Seat Cover provides drivers with both protection of their vehicle combined with a premium upgrade to the luxurious driving experience of their the automaker model.

Lincoln MKS Seat Cover Parts and Q&A

Cushion Cover, Camel, Passenger Side
8A5Z-5462900-CA
Q: How to repair and service the front backrest seat cover on Lincoln MKS?
A:
Start your front seat backrest cover service or repair by taking out the seat backrest while having the live Air Bag module positioned away from the body using deployment door/trim cover/tear seam. Any damage to the front seat backrest trim covers requires replacement since this componentUnavailable for repair on vehicles equipped with side air bags. A side air bag deployment requires replacement of the seat backrest foam pad together with the backrest trim cover, deployment chute and side air bag module, and nuts and possibly a new seat backrest frame. The vehicle requires a functional and faultless Supplemental Restraint System (SRS) before returning to customers because the air bag warning indicator will activate when the correct Restraints Control Module (RCM) fuse is removed with the ignition turned ON. Pull the backrest panel sustainers from their bottom attachments using the same side of each guide sleeve to let the retainers disengage. Pivoting the panel bottom away from the seat ensures clip safety. J-clips on the backrest wires should be removed before you take off the rear carpet flap toe-kick and detach hook-and-loop strips from the backrest trim cover. Start by disconnecting the backrest trim cover J-clips which secure to the backrest frame wires at the top and then detach the backrest Thermo-Electric Device (TED) through disconnecting its electrical connector while separating the pin-type retainer. Following removal of the backrest trim cover foam pad the technician should push the cover inside out before removing every hog ring attached to the backrest frame. The backrest trim cover installation requires its inside-out placement onto the backrest foam pad followed by hog ring attachment at five locations for the top wire and six locations for the side wires. Check that the deployment chute aligns properly with clear exit routes within the seat side air bag module cavity then install the guide sleeves for the head restraint before inspection of the cavity for foreign material. The backrest trim cover goes around the foam pad and frame but you should fasten only the lower J-clips and the side J-clips at this time. The installation requires placing the backrest TED between the frame and foam pad to achieve a connection with the foam pad wire before connector attachment. Attachment of upper J-clips commences with the backrest frame wires followed by trim cover wrapping of the recliner and then hook-and-loop strip and J-clip securing procedures. Complete installation of the seat backrest involves pivoting the bottom first then sliding it upward until the upper retainers lock in while making sure all clips are correctly attached.
Seat Back Cover, Passenger Side
8A5Z-5464416-DC
Q: How to properly replace the rear seat cover while ensuring the installation of new cushion foam pads and cushion heater mats on Lincoln MKS?
A:
The replacement of rear Seat Cushion cover demands simultaneous installation of new cushion foam pads and cushion heater mats which require their respective pair. Start by taking out the rear seat cushion from its position. You must remove the hog rings securing the cushion trim cover wires against the cushion foam pad wires from beneath the assembly before placing the heated seat mat wire harness under the draw string during installation. Be careful to detach the cushion trim cover from hook-and-loop strips to prevent damaging the cushion foam pad. Scrapping the hog rings enables you to detach the hook-and-loop strips before removing the cushion trim cover. The reverse procedure of removal steps needs to be performed to finish the process.