How to Service and Repair the Neutral Safety Switch for the 4R70E/4R75E Transmission on Lincoln Town Car?

The procedure for servicing the Transmission Position Switch/Sensor for 4R70E/4R75E starts with parking the vehicle on a hoist when the transmission is set to NEUTRAL. The selector lever cable and Transmission Range (TR) sensor connector should be disconnected first before removing the TR sensor bolts which allow you to extract the sensor. First install the TR sensor while maintaining a loose threading on the bolts. The manual control lever needs to be set in NEUTRAL position while using the TR Sensor Alignment Gauge to achieve precise sensor slot alignment. It is essential to attach the screws one by one starting with the opposite direction yet ending with 9 Nm (80 lb-in) final torque. Secure the sensor then position the manual control lever at (D) while connecting the selector lever cable and tighten it to 30 Nm (22 lb-ft) before reconnecting the TR sensor connector.

OEM Lincoln Town Car Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Neutral Safety Switches found

View related parts
Lincoln Town Car Neutral Safety Switch
Part Number: F5AZ-7A247-AA
Product Specifications
- Other Name: Switch Assembly - Starter Inhibitor; Range Sensor
- Replaces: F5AZ-7A247-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Lincoln Town Car | Base, Cartier, Cypress, Executive, Jack Nicklaus, Signature, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Neutral Safety Switch
Part Number: D6RY-7A247-B
Product Specifications
- Other Name: Switch Assembly - Starter; Back Up Light Switch; Range Sensor; Back-Up Switch; Switch Assembly - Starter Inhibitor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1991 Lincoln Town Car | Base, Cartier, Cypress, Executive, Signature, Signature SE, Touring Edition | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Lincoln Town Car Neutral Safety Switch
Part Number: F8AZ-7F293-AA
$69.62 MSRP: $110.55
You Save: $40.93 (38%)
Product Specifications
- Other Name: Sensor - Manual Lever Position; Range Sensor; Sensor - Manual Lever Position - Mlps
- Manufacturer Note: Digital TRS, FROM 11/10/97
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Lincoln Town Car | Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Range Sensor
Part Number: F5VY-7F293-AA
Product Specifications
- Other Name: Sensor - Manual Lever Position; Sensor - Manual Lever Position - Mlps
- Manufacturer Note: 4.6L, BEFORE 11/10/97
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Lincoln Town Car | Anniversary, Base, Cartier, Cypress, Executive, Signature, Touring Edition | 8 Cyl 4.6 L GAS

Lincoln Town Car Neutral Safety Switch

Welcome to our website where you can discover high-quality, genuine Lincoln Town Car Neutral Safety Switch. We offer an extensive inventory of OEM Lincoln Town Car Neutral Safety Switch at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln Town Car Neutral Safety Switch Parts Questions & Experts Answers

Neutral Safety Switch
F8AZ-7F293-AA
Q: How to Service and Repair the Neutral Safety Switch for the 4R70E/4R75E Transmission on Lincoln Town Car?
A: The procedure for servicing the Transmission Position Switch/Sensor for 4R70E/4R75E starts with parking the vehicle on a hoist when the transmission is set to NEUTRAL. The selector lever cable and Transmission Range (TR) sensor connector should be disconnected first before removing the TR sensor bolts which allow you to extract the sensor. First install the TR sensor while maintaining a loose threading on the bolts. The manual control lever needs to be set in NEUTRAL position while using the TR Sensor Alignment Gauge to achieve precise sensor slot alignment. It is essential to attach the screws one by one starting with the opposite direction yet ending with 9 Nm (80 lb-in) final torque. Secure the sensor then position the manual control lever at (D) while connecting the selector lever cable and tighten it to 30 Nm (22 lb-ft) before reconnecting the TR sensor connector.