How to Ensure Proper Functionality of the Brake Drum on a Mercury Cougar?

Service or repair work on the brake drum should start by easing the wheel nuts while supporting the vehicle in a raised position. A technician should remove the wheel then release the brake shoe automatic adjuster prior to taking off the brake drum. Before removing the drum you must remove all retainers which are present. The brake drum should be installed first then the retainers unless they already existed on the vehicle. Reinstall the wheel afterward and press the brake pedal to enable automatic adjustment of the system.

How to service and repair the brake drum on Mercury Mariner?

You must remove the wheel together with its tire before conducting brake drum maintenance. A brake drum puller together with a torch tool should never be used because they may produce unintended brake drum distortion. To separate a brake drum that resists movement from the wheel hub pilot diameter it is necessary to tap the drum's center between wheel studs. To prevent brake drum binding with the brake shoes professionals should adjust the shoes by moving the lever at the adjuster toward the retainer gear and rotating the screw upward. The brake shoes should be retracted before removing the brake drum. The first step of installation begins with using the Brake Drum Gauge to check the inside diameter of the brake drum. Install a new brake drum if this measurement exceeds the stamped specification on the outer face. First adjust the rear brakes according to requirements before setting the brake drum back onto the vehicle and reinstalling the tire and wheel.

OEM Mercury Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Brake Drums found

View related parts
Mercury Drum, Rear Part Number: 8L8Z-1126-BD
$60.09 MSRP: $81.77
You Save: $21.68 (27%)
ADD TO CART
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Brake Drum
- Position: Rear
- Replaces: 8L8Z-1126-B
Fits the following Mercury Models:
- Mariner | 2008-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Hub & Drum, Rear Part Number: YF1Z-1V126-BA
$50.52 MSRP: $68.75
You Save: $18.23 (27%)
ADD TO CART
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Wheel Hub Repair Kit; Brake Drum; Wheel Hub; Drum
- Manufacturer Note: Rear
- Position: Rear
Fits the following Mercury Models:
- Cougar | 1989-1997 | LS, XR-7 | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
- Sable | 1990-2000 | G, GS, LS, LS Premium, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Drum, Front Part Number: YF1Z-1V125-GA
$36.74 MSRP: $49.99
You Save: $13.25 (27%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor; Rotor
- Position: Front
Fits the following Mercury Models:
- Cougar | 1989-1991 | LS, XR-7 | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
- Sable | 1986-1991 | GS, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Drum, Rear Part Number: 4U2Z-1V126-AB
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
ADD TO CART
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Brake Drum
- Position: Rear
- Replaced by: 4U2Z-1V126-AC
Fits the following Mercury Models:
- Sable | 2001-2005 | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Drum, Rear Part Number: 2U2Z-1V126-C
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Brake Drum
- Manufacturer Note: Ford Retail Spec
- Position: Rear
- Replaced by: 2U2Z-1V126-F
Fits the following Mercury Models:
- Mariner | 2005-2007 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Brake Drum Part Number: YW7Z1V126AA
Product Specifications
- Other Name: Drum - Brake; Drum
Fits the following Mercury Models:
- Colony Park | 1987-1991 | GS, LS | 8 Cyl 5.0 L GAS
- Grand Marquis | 1984-1991 | Base, Colony Park, GS, LS | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Marquis | 1985-1986 | Base, Brougham | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Mercury Brake Drum, Rear Part Number: YR3Z-1V126-AA
Product Specifications
- Other Name: Drum - Brake; Drum
- Manufacturer Note: Rear, exc. SVO and Cobra - with 9 x 1 3/4" brakes
- Position: Rear
Fits the following Mercury Models:
- Capri | 1985-1986 | 5.0, GS, RS | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
- Cougar | 1987-1988 | LS, XR-7 | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
- Marquis | 1984-1986 | Base, Brougham | 4 Cyl 2.3 L GAS, 4 Cyl 2.3 L LPG, 6 Cyl 3.8 L GAS
View More
View related parts
Mercury Hub & Drum, Rear Part Number: YF1Z-1V126-B
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Wheel Hub Repair Kit; Brake Drum; Wheel Hub; Drum
- Position: Rear
- Replaces: BRD-31, F2DZ-1126-B, YF1Z-1V126-AA
Fits the following Mercury Models:
- Sable | 1986-2000 | G, GS, LS, LS Premium, LTS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Drum Part Number: XF5Z-1126-AA
Product Specifications
- Other Name: Drum - Brake; Brake Drum
- Manufacturer Note: Drum asy. 1999/
- Replaces: 1F5Z-1V126-AA, BRD-35, F3XY-1126-A
Fits the following Mercury Models:
- Villager | 1993-2002 | Base, Estate, GS, LS, Nautica, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Mercury Brake Drum Part Number: FOVZ-1126-BA
Product Specifications
- Other Name: Drum - Brake; Drum
Fits the following Mercury Models:
- Colony Park | 1987-1991 | GS, LS | 8 Cyl 5.0 L GAS
- Grand Marquis | 1984-1991 | Base, Colony Park, GS, LS | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Marquis | 1985-1986 | Base, Brougham | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Mercury Drum Part Number: F7CZ-1126-AA
Product Specifications
- Other Name: Drum - Brake; Brake Drum
Fits the following Mercury Models:
- Tracer | 1997-1999 | GS, LS, Trio | 4 Cyl 2.0 L GAS
View related parts
Mercury Drum Part Number: F5RZ1126A
Product Specifications
- Other Name: Drum Brake; Brake Drum; Drum - Brake
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base | 4 Cyl 2.0 L GAS
- Mystique | 1995-2000 | Base, GS, GS Spree, LS, LS Young America | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Mercury Brake Drum

If you own Mercury and want to keep it in top shape, choosing OEM Brake Drum is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Brake Drum at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Mercury Brake Drum Parts and Q&A

Drum
F5RZ1126A
Q: How to Ensure Proper Functionality of the Brake Drum on a Mercury Cougar?
A:
Service or repair work on the brake drum should start by easing the wheel nuts while supporting the vehicle in a raised position. A technician should remove the wheel then release the brake shoe automatic adjuster prior to taking off the brake drum. Before removing the drum you must remove all retainers which are present. The brake drum should be installed first then the retainers unless they already existed on the vehicle. Reinstall the wheel afterward and press the brake pedal to enable automatic adjustment of the system.
Drum, Rear
8L8Z-1126-BD
Q: How to service and repair the brake drum on Mercury Mariner?
A:
You must remove the wheel together with its tire before conducting brake drum maintenance. A brake drum puller together with a torch tool should never be used because they may produce unintended brake drum distortion. To separate a brake drum that resists movement from the wheel hub pilot diameter it is necessary to tap the drum's center between wheel studs. To prevent brake drum binding with the brake shoes professionals should adjust the shoes by moving the lever at the adjuster toward the retainer gear and rotating the screw upward. The brake shoes should be retracted before removing the brake drum. The first step of installation begins with using the Brake Drum Gauge to check the inside diameter of the brake drum. Install a new brake drum if this measurement exceeds the stamped specification on the outer face. First adjust the rear brakes according to requirements before setting the brake drum back onto the vehicle and reinstalling the tire and wheel.