How to Service and Repair the Brake Line Hose on Mercury Grand Marquis?

The brake flexible hose service and repair process begins with using clean specified brake fluid which excludes previously drained fluid to protect against contamination and damage. Beware against letting brake fluid come into contact with either painted surfaces or plastic materials since it might trigger harm; quickly wash any affected areas with water when such contact occurs. A person must disable the fire suppression system before performing services on the vehicle for safety reasons. Install new washers before tightening the brake caliper flow bolt to 48 Nm (35 lb-ft) torque using the discarding two copper washers. You need to disconnect the brake tube fitting at the brake flexible hose while tightening the fitting to 17 Nm (150 lb-in) before reinstalling it. Install the brake flexible hose and reset the bracket bolt with tightness at 20 Nm (177 lb-in). You should reverse the removal method to put on the new hose and perform brake caliper bleeding work. The vehicle requires a fire suppression system restart after the service completion.

How to Service and Repair the Brake Line on Mercury Mariner?

You should start by disconnecting the wheel along with its tire when you need to work on the brake flexible hose. The service on brake flexible hose begins by removing its retaining clip followed by disconnecting the brake tube fitting from the hose. After installation re-torque the fitting to reach 18 Nm (159 lb-in). The next step requires separating the brake flexible hose from the strut bracket before disconnecting it from the caliper while tightening that joining point to 20 Nm (177 lb-in) torque setting for reinstallation. When installing the new hose reverse the removal steps and add a new retaining clip while performing brake caliper bleeding afterward. Clean brake fluid obtained from authorized sources should be used during this procedure and previously used fluid should never be reused because it could create contamination and harm to the system. Keep bridge fluid away from painted and plastic surfaces following a spill because damage may occur and quick water washing is necessary to clean the area. The product label should be read carefully together with seeking expert medical guidance regarding urgent medical situations since failure to follow these instructions may lead to severe injuries.

OEM Mercury Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

90 Brake Lines found

View related parts
Mercury Flex Hose, Front Driver Side Part Number: 8L5Z-2078-L
$30.23 MSRP: $48.00
You Save: $17.77 (38%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Front Flex Hose; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7L5Z-2078-L
Fits the following Mercury Models:
- Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Brake Tube, Rear Passenger Side Part Number: YF1Z-2267-AA
$38.01 MSRP: $60.36
You Save: $22.35 (38%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Hydraulic Line, Rear Right; Brake Hose; Brake Line
- Manufacturer Note: RH, Frt. disc/rear drum
- Position: Rear Passenger Side
Fits the following Mercury Models:
- Sable | 2000-2005 | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Flex Hose, Front Part Number: BL8Z-2078-A
$43.40 MSRP: $68.91
You Save: $25.51 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front; Brake Hose; Brake Line; Front Flex Hose; Hydraulic Hose
- Position: Front
- Replaces: 9L8Z-2078-A, 8L8Z-2078-A, 8L8Z-2078-B
Fits the following Mercury Models:
- Mariner | 2008-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Flex Hose, Passenger Side Part Number: 9L8Z-2A442-A
$25.53 MSRP: $40.55
You Save: $15.02 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Passenger Side
- Replaces: 8L8Z-2282-A
Fits the following Mercury Models:
- Mariner | 2007-2011 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Flex Hose, Driver Side Part Number: 9L8Z-2A442-B
$27.37 MSRP: $43.45
You Save: $16.08 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Driver Side
- Replaces: 8L8Z-2282-B, 8L8Z-2A442-A
Fits the following Mercury Models:
- Mariner | 2007-2011 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Brake Hose, Front Part Number: 7L8Z-2078-B
$23.01 MSRP: $36.55
You Save: $13.54 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Line; Front Flex Hose
- Position: Front
- Replaces: 7L8Z-2078-A
Fits the following Mercury Models:
- Mariner | 2005-2007 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Flex Hose, Front Driver Side Part Number: AE5Z-2078-E
$52.30 MSRP: $87.64
You Save: $35.34 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Replaces: AE5Z-2078-C, AE5Z-2078-A
Fits the following Mercury Models:
- Milan | 2010-2011 | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Flex Hose, Rear Part Number: 8G1Z-2A442-A
$22.05 MSRP: $30.01
You Save: $7.96 (27%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Flex Hose Part Number: 5L8Z-2282-AA
$38.70 MSRP: $61.45
You Save: $22.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
Fits the following Mercury Models:
- Mariner | 2005-2007 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Flex Hose, Driver Side Part Number: 5L8Z-2282-AC
$47.29 MSRP: $75.09
You Save: $27.80 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Driver Side
Fits the following Mercury Models:
- Mariner | 2005-2007 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Flex Hose, Driver Side Part Number: F2AZ-2A442-B
$13.46 MSRP: $18.62
You Save: $5.16 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose; Hydraulic Hose; Brake Hose; Brake Line
- Manufacturer Note: LH, without ABS
- Position: Driver Side
Fits the following Mercury Models:
- Grand Marquis | 1992-1997 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Flex Hose, Front Passenger Side Part Number: 6F9Z-2078-A
$28.04 MSRP: $38.79
You Save: $10.75 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 5F9Z-2078-AA
Fits the following Mercury Models:
- Montego | 2005-2007 | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Flex Hose, Front Passenger Side Part Number: 8A5Z-2078-A
$19.56 MSRP: $27.06
You Save: $7.50 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 8G1Z-2078-A
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Flex Hose, Front Driver Side Part Number: 6F9Z-2078-B
$34.07 MSRP: $47.13
You Save: $13.06 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 5F9Z-2078-BA
Fits the following Mercury Models:
- Montego | 2005-2007 | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Tube Assembly Part Number: 5F9Z-2C296-AA
$10.97 MSRP: $15.17
You Save: $4.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Hydraulic Line; Brake Line
Fits the following Mercury Models:
- Montego | 2005 | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Flex Hose, Front Driver Side Part Number: 5F1Z-2078-B
$45.46 MSRP: $61.86
You Save: $16.40 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Manufacturer Note: LH, After 12-15-2004
- Position: Front Driver Side
- Replaces: 1F1Z-2078-BA
Fits the following Mercury Models:
- Sable | 1996-2005 | G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Flex Hose, Driver Side Part Number: 1W7Z-2078-CA
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Manufacturer Note: LH , Less ABS
- Position: Driver Side
Fits the following Mercury Models:
- Grand Marquis | 1998-2002 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Brake Tube Part Number: 3W1Z-2C296-AA
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Line
Fits the following Mercury Models:
- Grand Marquis | 2003-2005 | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L GAS
View related parts
Mercury Flex Hose, Passenger Side Part Number: 9E5Z-2282-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Passenger Side
Fits the following Mercury Models:
- Milan | 2009-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Flex Hose, Driver Side Part Number: 9E5Z-2283-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Driver Side
Fits the following Mercury Models:
- Milan | 2009-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

| Page 1 of 5 |Next >

1-20 of 90 Results

Mercury Brake Line

If you own Mercury and want to keep it in top shape, choosing OEM Brake Line is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Brake Line at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Mercury Brake Line Parts and Q&A

Flex Hose, Rear Passenger Side
6W1Z-2A442-AA
Q: How to Service and Repair the Brake Line Hose on Mercury Grand Marquis?
A:
The brake flexible hose service and repair process begins with using clean specified brake fluid which excludes previously drained fluid to protect against contamination and damage. Beware against letting brake fluid come into contact with either painted surfaces or plastic materials since it might trigger harm; quickly wash any affected areas with water when such contact occurs. A person must disable the fire suppression system before performing services on the vehicle for safety reasons. Install new washers before tightening the brake caliper flow bolt to 48 Nm (35 lb-ft) torque using the discarding two copper washers. You need to disconnect the brake tube fitting at the brake flexible hose while tightening the fitting to 17 Nm (150 lb-in) before reinstalling it. Install the brake flexible hose and reset the bracket bolt with tightness at 20 Nm (177 lb-in). You should reverse the removal method to put on the new hose and perform brake caliper bleeding work. The vehicle requires a fire suppression system restart after the service completion.
Flex Hose, Passenger Side
9L8Z-2A442-A
Q: How to Service and Repair the Brake Line on Mercury Mariner?
A:
You should start by disconnecting the wheel along with its tire when you need to work on the brake flexible hose. The service on brake flexible hose begins by removing its retaining clip followed by disconnecting the brake tube fitting from the hose. After installation re-torque the fitting to reach 18 Nm (159 lb-in). The next step requires separating the brake flexible hose from the strut bracket before disconnecting it from the caliper while tightening that joining point to 20 Nm (177 lb-in) torque setting for reinstallation. When installing the new hose reverse the removal steps and add a new retaining clip while performing brake caliper bleeding afterward. Clean brake fluid obtained from authorized sources should be used during this procedure and previously used fluid should never be reused because it could create contamination and harm to the system. Keep bridge fluid away from painted and plastic surfaces following a spill because damage may occur and quick water washing is necessary to clean the area. The product label should be read carefully together with seeking expert medical guidance regarding urgent medical situations since failure to follow these instructions may lead to severe injuries.