How to Safely Service and Install an ABS Control Module on Mercury Mariner?

Brake fluid management is critical during Electronic Brake Control Module repairs of the Anti-Lock Brake System (ABS) Module because polyglycol ethers and polyglycols present in the fluid can result in eye irritation and require immediate attention involving water flushing of eyes for 15 minutes followed by medical assistance if irritation continues. The consumer should drink water followed by vomiting induction if they eat any contaminated substance and must request urgent medical intervention. Any leakage from brake fluid needs immediate cleaning with water because the fluid causes harm to painted surfaces and plastics. The ABS module becomes vulnerable to electrical discharge which can result in harm to the device when it is exposed. Specific configuration procedures using vehicle-based built data must be completed before installing and calibrating a new ABS module. The first step starts by removing the hydraulic control unit followed by unscrewing the three ABS screws before installation where torque should be set to 2 Nm (18 inch lbs.). The installed ABS module requires reinstallation by performing its removal process in reverse order.

OEM Mercury Mariner ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 ABS Control Modules found

View related parts
Mercury Mariner Control Module Part Number: BL8Z-2C219-A
$471.21 MSRP: $540.00
You Save: $68.79 (13%)
ADD TO CART
Product Specifications
- Other Name: Control; ABS Modulator Valve; ABS Control Module; Controller
- Replaces: BL8Z-2C219-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Mercury Mariner | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Mariner Control Module Part Number: 8L8Z-2C219-D
$522.10 MSRP: $707.69
You Save: $185.59 (27%)
ADD TO CART
Product Specifications
- Other Name: Control; ABS Modulator Valve; ABS Control Module; Controller
- Replaces: 8L8Z-2C219-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Control Module Part Number: 9L8Z-2C219-F
$591.53 MSRP: $808.92
You Save: $217.39 (27%)
ADD TO CART
Product Specifications
- Other Name: Control; ABS Modulator Valve; ABS Control Module; Controller
- Replaces: 9L8Z-2C219-C, 9L8Z-2C219-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Mercury Mariner | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Control Module Part Number: AM6Z-2C219-B
$950.40 MSRP: $1299.69
You Save: $349.29 (27%)
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module; Controller
- Replaces: 9M6Z-2C219-A, AM6Z-2C219-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Mercury Mariner | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Modulator Valve Part Number: AM6Z-2C215-A
$1254.38 MSRP: $1715.38
You Save: $461.00 (27%)
ADD TO CART
Product Specifications
- Other Name: Module; ABS Hydraulic Assembly; ABS Control Module
- Manufacturer Note: Hydraulic
- Replaces: 9M6Z-2C215-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Modulator Valve Part Number: AL8Z-2C215-A
$931.50 MSRP: $1273.85
You Save: $342.35 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; ABS Control Module
- Manufacturer Note: HCU
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Mariner | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Mariner Modulator Valve Part Number: 8M6Z-2C286-A
Product Specifications
- Other Name: Control Assembly - ABS Hydraulics; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit
- Manufacturer Note: ECU & HCU
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Mercury Mariner | Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Modulator Valve Part Number: 8L8Z-2C346-D
$727.88 MSRP: $1078.33
You Save: $350.45 (33%)
Product Specifications
- Other Name: Module - ABS Control; ABS Control Module; Module
- Replaces: 8L8Z-2C346-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Control Module Part Number: AL8Z-2C219-A
$343.74 MSRP: $463.08
You Save: $119.34 (26%)
Product Specifications
- Other Name: Control; ABS Control Module; Controller
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Mercury Mariner | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Mariner Control Module Part Number: BM6Z-2C219-A
$760.50 MSRP: $1040.00
You Save: $279.50 (27%)
Product Specifications
- Other Name: Control; ABS Control Module; Controller
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Mercury Mariner | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Modulator Valve Part Number: 9L8Z-2C346-C
$990.00 MSRP: $1353.85
You Save: $363.85 (27%)
Product Specifications
- Other Name: Module - ABS Control; ABS Control Module; Module
- Manufacturer Note: HCU & ECU
- Replaces: 9L8Z-2C346-A, 9L8Z-2C346-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Mercury Mariner | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Modulator Valve Part Number: 7M6Z-2C286-B
Product Specifications
- Other Name: Control Assembly - ABS Hydraulics; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit
- Manufacturer Note: ECU & HCU
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Modulator Valve Part Number: 6L8Z-2C286-A
Product Specifications
- Other Name: Control Assembly - ABS Hydraulics; ABS Control Module; Module
- Replaces: 5L8Z-2C286-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Mercury Mariner | Base, Convenience, Luxury, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mercury Mariner ABS Control Module

OEM ABS Control Module boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get ABS Control Module with long life and a perfect fit. Come to our website and find genuine Mercury Mariner parts. We keep a wide inventory of OEM Mariner parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Mariner ABS Control Module is part of the anti-lock braking system within cars and loved for its efficiency as a part to improve safety and performance of cars. Specifically used to enhance the anti lock characteristics of the car wheels during adverse conditions of powerful braking, the ABS Control Module guarantees that the Mercury Mariner never loses connection with the floor, thereby enhancing its stability. It includes wheel speed sensors, at least one valve, a pump and an electronic control unit adjusting and controlling the brake pressure and restoring hydraulic pressure as required at high intervention velocities significantly exceeding human apprehension and reaction times. Being a part of the Mercury Mariner compact crossover SUV that came to market in 2005, the ABS Control Module has also received updates, including ESC and Traction Control to improve vehicle handling during different and difficult conditions. Compatible with a number of Mariner models, the ABS Control Module is notable for being very durable and efficient, which has helped Mariner earn honors such as Consumer Digest premier Buy. Mercury Mariner ABS Control Module is unique and different from other automobiles in the market because of the interaction it has with other systems to provide a safer drive. Given its performance and safety features, even today, the Mercury Mariner ABS Control Module serves as the vital part of the vehicle, which only underlines the Mercury brand success in the sphere of concentration on quality and new technologies in automotive industry.

Mercury Mariner ABS Control Module Parts and Q&A

Modulator Valve
7M6Z-2C286-B
Q: How to Safely Service and Install an ABS Control Module on Mercury Mariner?
A:
Brake fluid management is critical during Electronic Brake Control Module repairs of the Anti-Lock Brake System (ABS) Module because polyglycol ethers and polyglycols present in the fluid can result in eye irritation and require immediate attention involving water flushing of eyes for 15 minutes followed by medical assistance if irritation continues. The consumer should drink water followed by vomiting induction if they eat any contaminated substance and must request urgent medical intervention. Any leakage from brake fluid needs immediate cleaning with water because the fluid causes harm to painted surfaces and plastics. The ABS module becomes vulnerable to electrical discharge which can result in harm to the device when it is exposed. Specific configuration procedures using vehicle-based built data must be completed before installing and calibrating a new ABS module. The first step starts by removing the hydraulic control unit followed by unscrewing the three ABS screws before installation where torque should be set to 2 Nm (18 inch lbs.). The installed ABS module requires reinstallation by performing its removal process in reverse order.