How to service and repair the radiator cooling fan motor and shroud on Mercury Mariner?

The vehicle must be placed in NEUTRAL position on a hoist before starting radiator cooling fan motor and shroud servicing and repair. The service starts with removing the front impact severity sensor before extracting both pushpin retainers from the front bumper bracket alongside the front grille bolts which require 10 Nm (89 inch lbs.) torque. You must drain the cooling system and detach the transmission cooler hose for vehicles with 3.0L. The drilling of both radiator brackets requires removal of their 4 bolts followed by tight application of 10 Nm (89 inch lbs.) when reinstalling. Disengage the center support lower bolt and the nut that secures the center support by screwing the bolt to 10 Nm (89 inch lbs.) torque. After disconnecting the electrical connectors of the cooling fan and removing the 2 bolts, extraction of the cooling fan motor and shroud is possible; installation requires tightening the bolts to 10 Nm (89 inch lbs.). Also refollow the removal steps to reinstall while 3.0L vehicle owners need to perform cooling system filling and bleeding.

OEM Mercury Mariner Fan Motor

Cooling Fan Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fan Motors found

View related parts
Mercury Mariner Fan Assembly
Part Number: 5L8Z-8C607-CB
$158.03 MSRP: $215.04
You Save: $57.01 (27%)
ADD TO CART
Product Specifications
- Other Name: Motor And Fan Assembly - Engine Cooling; Engine Cooling Fan Assembly; Radiator Fan Assembly; Fan Blade
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Mercury Mariner | Base, Convenience | 4 Cyl 2.3 L GAS
View related parts
Mercury Mariner Fan & Motor
Part Number: 8L8Z-8C607-B
$186.15 MSRP: $309.09
You Save: $122.94 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor And Fan Assembly - Engine Cooling; Dual Radiator and Condenser Fan Assembly; Fan Blade; Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Fan & Motor
Part Number: 5L8Z-8C607-HB
$265.10 MSRP: $366.74
You Save: $101.64 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor And Fan Assembly - Engine Cooling; Dual Radiator and Condenser Fan; Radiator Fan; Fan Blade; Fan Assembly; Cooling Fan Assembly
- Manufacturer Note: RH/LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Mariner | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Fan & Motor
Part Number: 8L8Z-8C607-A
$232.39 MSRP: $378.00
You Save: $145.61 (39%)
ADD TO CART
Product Specifications
- Other Name: Motor And Fan Assembly - Engine Cooling; Dual Radiator and Condenser Fan Assembly; Fan Blade; Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mercury Mariner Fan & Motor
Part Number: 5M6Z-8C607-AH
$1159.93 MSRP: $1926.00
You Save: $766.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor And Fan Assembly - Engine Cooling; Dual Radiator and Condenser Fan Assembly; Fan Blade; Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Mariner | Convenience, Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Fan & Motor
Part Number: 5L8Z-8C607-GD
Product Specifications
- Other Name: Fan and Motor Assembly; Engine Cooling Fan; Dual Radiator and Condenser Fan; Fan Motor; Radiator Fan; Fan Blade; Fan Assembly; Cooling Fan Assembly
- Manufacturer Note: RH/LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Mariner | Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Fan & Motor
Part Number: 5L8Z-8C607-BF
Product Specifications
- Other Name: Fan and Motor Assembly; Engine Cooling Fan; Dual Radiator and Condenser Fan; Radiator Fan Assembly; Fan Blade; Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Mercury Mariner | Base, Convenience, Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS

Mercury Mariner Fan Motor

Welcome to our website where you can discover high-quality, genuine Mercury Mariner Fan Motor. We offer an extensive inventory of OEM Mercury Mariner Fan Motor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Mariner Fan Motor Parts Questions & Experts Answers

Fan & Motor
5M6Z-8C607-AH
Q: How to service and repair the radiator cooling fan motor and shroud on Mercury Mariner?
A: The vehicle must be placed in NEUTRAL position on a hoist before starting radiator cooling fan motor and shroud servicing and repair. The service starts with removing the front impact severity sensor before extracting both pushpin retainers from the front bumper bracket alongside the front grille bolts which require 10 Nm (89 inch lbs.) torque. You must drain the cooling system and detach the transmission cooler hose for vehicles with 3.0L. The drilling of both radiator brackets requires removal of their 4 bolts followed by tight application of 10 Nm (89 inch lbs.) when reinstalling. Disengage the center support lower bolt and the nut that secures the center support by screwing the bolt to 10 Nm (89 inch lbs.) torque. After disconnecting the electrical connectors of the cooling fan and removing the 2 bolts, extraction of the cooling fan motor and shroud is possible; installation requires tightening the bolts to 10 Nm (89 inch lbs.). Also refollow the removal steps to reinstall while 3.0L vehicle owners need to perform cooling system filling and bleeding.