How to Service and Repair the Lower Rear Motor and Transmission Mount for the 2.3L Transaxle on Mercury Mariner?

The service and repair of the lower rear transmission mount for the 2.3L transaxle must begin by placing the vehicle in neutral gear and hoisting it before proceeding. The first step involves disconnecting the breather tube and the Mass Air Flow (MAF) sensor before you take off the intake tube while removing the air cleaner cover. Tools require replacing the air cleaner assembly while you remove both the mount through bolt. Reinstall this bolt after tightening it to 120 Nm. The procedure starts by detaching one retaining bolt and two nuts that secure the mount before you can remove the mount for reinstallation with proper tightening of nuts to 90 Nm (66 ft. lbs.). The complete installation process ends with performing the opposite steps to removal.

How to Service and Repair the Front Motor and Transmission Mount for the 2.3L Engine on Mercury Mariner?

The first step for servicing or repairing the transaxle support insulator at the lower rear part for 2.3L engine required hoisting the vehicle in neutral position. Service the transaxle through a three-step process starting with disconnecting both the breather tube and MAF sensor followed by intake tube and air cleaner cover until reaching the air cleaner assembly. The next step requires removing the mount through bolt and tightening it to 120 Nm (89 ft. lbs.) before reinstallation. The I retaining bolt and the two nuts need to be removed before you can take out the mount from its location. When reinstalling the mount use 90 Nm (66 ft. lbs.) of torque. To finish the installation you should execute the reversal of all removal steps.

OEM Mercury Mariner Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

42 Motor And Transmission Mounts found

View related parts
Mercury Mariner Engine Support Part Number: 5L8Z-6P094-AA
$70.41 MSRP: $97.40
You Save: $26.99 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mounting - Front; Engine Mount Crossmember; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Mariner | Base | 4 Cyl 2.3 L GAS
View related parts
Mercury Mariner Front Mount Part Number: YL8Z-6068-AA
$150.00 MSRP: $218.33
You Save: $68.33 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount Support Bracket; Torque Strut; Motor Mount; Rear Mount; Front Insulator; Insulator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Mercury Mariner | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Bracket Part Number: 9L8Z-6061-A
$74.69 MSRP: $108.72
You Save: $34.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket; Transmission Mount; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | Base, Premier | 4 Cyl 2.5 L GAS
View related parts
Mercury Mariner Rear Mount Part Number: 9M6Z-6068-A
$70.30 MSRP: $102.33
You Save: $32.03 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Side Mount, Rear Part Number: 9L8Z-6068-A
$85.90 MSRP: $125.03
You Save: $39.13 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Rear; Engine Mount Bracket; Motor Mount; Rear Mount; Mount
- Position: Rear
- Replaces: 5L8Z-6068-BB, 5L8Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Mercury Mariner | Base, Luxury, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Engine Support Part Number: 6L8Z-6P094-CA
$105.80 MSRP: $154.00
You Save: $48.20 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mounting - Front; Engine Mount Crossmember; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Mercury Mariner | Base, Convenience, Luxury, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Upper Bracket Part Number: 5L8Z-6061-FB
$59.70 MSRP: $86.90
You Save: $27.20 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket, Upper; Transmission Mount; Motor Mount; Bracket; Engine Mount Bracket
- Position: Upper
- Replaces: 5L8Z-6061-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011, 2005-2006 Mercury Mariner | Base, Luxury, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Engine Support Part Number: AM6Z-6P094-A
$115.44 MSRP: $159.70
You Save: $44.26 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mounting - Front; Engine Mount Crossmember; Engine Mount Bracket; Motor Mount
- Replaces: 5M6Z-6P094-AA, 6M6Z-6P094-AA, 9M6Z-6P094-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Rear Mount Part Number: 9M6Z-6A023-A
$78.60 MSRP: $106.95
You Save: $28.35 (27%)
ADD TO CART
Product Specifications
- Other Name: Support; Engine Mount Bracket; Engine Mount Torque Strut; Motor Mount; Side Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Support Rod Part Number: 5M6Z-6068-AC
$35.38 MSRP: $48.14
You Save: $12.76 (27%)
ADD TO CART
Product Specifications
- Other Name: Housing; Engine Support Rod; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Link Rod; Support Strut; Strut
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Transmission Mount Part Number: 5L8Z-6038-CA
$48.08 MSRP: $66.51
You Save: $18.43 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Transfer Case Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mercury Mariner Engine Support Bracket Part Number: YL8Z-6L062-AA
$34.70 MSRP: $48.01
You Save: $13.31 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Crossmember; Transmission Mount; Motor Mount; Bracket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Mariner | Base, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Front Bracket Part Number: 5L8Z-6061-BB
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket; Motor Mount
- Position: Front
- Replaces: 5L8Z-6061-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience | 4 Cyl 2.3 L GAS
View related parts
Mercury Mariner Bracket Part Number: 6M6Z-6M007-A
Product Specifications
- Other Name: Automatic Transmission Mount Bracket; Engine Mount Bracket; Motor Mount; Transmission Mount
- Replaces: 5M6Z-6M007-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Engine Support Lower Insulator Part Number: YL8Z-6A061-BB
$55.88 MSRP: $81.33
You Save: $25.45 (32%)
Product Specifications
- Other Name: Insulator; Engine Mount Crossmember Insulator (Lower & Upper); Support Bracket Insulator; Transmission Mount; Engine Support Upper Insulator; Engine Support Insulator
- Position: Lower
- Replaces: YL8Z-6A061-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Mariner | Base, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Front Mount, Driver Side Part Number: 5L8Z-6031-BA
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Transmission Mount; Motor Mount; Bracket; Engine Mount Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Mercury Mariner | Base, Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Mount Bracket, Passenger Side Part Number: 5L8Z-6A023-AA
Product Specifications
- Other Name: Support; Engine Mount Bracket, Right; Engine Mount Bracket; Engine Mount; Engine Mount Torque Strut; Motor Mount; Side Support
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Front Bracket Part Number: 5M6Z-6061-BA
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket, Front; Motor Mount; Engine Mount Bracket
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Mount Part Number: 6M6Z-6068-B
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount Bracket; Motor Mount; Insulator Assembly - Engine Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Front Support, Driver Side Part Number: 5L8Z-6031-AA
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Support Bracket; Engine Mount Bracket, Left; Motor Mount; Front Mount; Engine Mount Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Mercury Mariner | Base, Convenience, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS

| Page 1 of 3 |Next >

1-20 of 42 Results

Mercury Mariner Motor And Transmission Mount

OEM Motor And Transmission Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Motor And Transmission Mount with long life and a perfect fit. Come to our website and find genuine Mercury Mariner parts. We keep a wide inventory of OEM Mariner parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Mariner Motor And Transmission Mount Parts and Q&A

Transmission Mount Bracket, Rear
5L8Z-6M007-AA
Q: How to Service and Repair the Lower Rear Motor and Transmission Mount for the 2.3L Transaxle on Mercury Mariner?
A:
The service and repair of the lower rear transmission mount for the 2.3L transaxle must begin by placing the vehicle in neutral gear and hoisting it before proceeding. The first step involves disconnecting the breather tube and the Mass Air Flow (MAF) sensor before you take off the intake tube while removing the air cleaner cover. Tools require replacing the air cleaner assembly while you remove both the mount through bolt. Reinstall this bolt after tightening it to 120 Nm. The procedure starts by detaching one retaining bolt and two nuts that secure the mount before you can remove the mount for reinstallation with proper tightening of nuts to 90 Nm (66 ft. lbs.). The complete installation process ends with performing the opposite steps to removal.
Transmission Mount
5L8Z-6038-BA
Q: How to Service and Repair the Front Motor and Transmission Mount for the 2.3L Engine on Mercury Mariner?
A:
The first step for servicing or repairing the transaxle support insulator at the lower rear part for 2.3L engine required hoisting the vehicle in neutral position. Service the transaxle through a three-step process starting with disconnecting both the breather tube and MAF sensor followed by intake tube and air cleaner cover until reaching the air cleaner assembly. The next step requires removing the mount through bolt and tightening it to 120 Nm (89 ft. lbs.) before reinstallation. The I retaining bolt and the two nuts need to be removed before you can take out the mount from its location. When reinstalling the mount use 90 Nm (66 ft. lbs.) of torque. To finish the installation you should execute the reversal of all removal steps.