FordParts
My Garage
My Account
Cart
OEM Mercury Milan Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Shock Absorbers found
Mercury Milan Strut, Front Driver Side Part Number: AH6Z-18124-D
$97.24 MSRP: $160.00You Save: $62.76 (40%)Ships in 1-2 Business Days
Mercury Milan Strut, Front Passenger Side Part Number: AH6Z-18124-C
$97.24 MSRP: $160.00You Save: $62.76 (40%)Ships in 1-2 Business Days
Mercury Milan Strut, Front Passenger Side Part Number: 7E5Z-18124-RH
$72.60 MSRP: $119.45You Save: $46.85 (40%)Ships in 1-2 Business Days
Mercury Milan Strut, Front Driver Side Part Number: 7E5Z-18124-LH
$72.34 MSRP: $121.45You Save: $49.11 (41%)Ships in 1-2 Business Days
Mercury Milan Shock Absorber, Rear Part Number: 6E5Z-18125-BA
$67.96 MSRP: $111.82You Save: $43.86 (40%)Ships in 1-2 Business Days
Mercury Milan Shock Absorber
OEM Shock Absorber boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Shock Absorber with long life and a perfect fit. Come to our website and find genuine Mercury Milan parts. We keep a wide inventory of OEM Milan parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.
The Mercury Milan Shock Absorber is one of the most important parts of the Mercury Milan's suspension and is generally noted for its reliability and excellent work. Manufactured to capture and diminish shocks or impacts the shock absorber provides a superior Mercury Milan ride experience, making it a choice model for drivers who value ride comfort and stability. The toughness of the terrain reduces the impact of kinetic energy into heat thus providing fluidity in operations of the car. As applied to the Mercury Milan autos, there are the Shock Absorbers that are mono-tube and twin-tube, as well as, the peculiarities of their usage. Twin-tube shocks are used due to its simplicity and mono-tube shocks make an impression by efficient heat exchanger. Higher level technologies like PSD or Position Sensitive Damping and magnetorheological dampers add to the superiority of the Mercury Milan Shock Absorber as it comes to a variety of driving intensities. Affordability and compatibility with the different Mercury Milan models manufactured between 2006 and 2011 show just how important the Shock Absorber is in increasing efficiency as well as safety. Mercury Milan is the mid-size sedan with developed short-long arm double wishbone front suspension and independent multi-link rear suspension for the premier performing. This model, the Mercury Milan has a ample interior space that single handedly gives this auto a niche in the market especially with better fuel efficiency and the quality of the Shock Absorber is also another reason why any consumer using this specific auto will have a smooth driving experience.
Mercury Milan Shock Absorber Parts and Q&A
- Q: How to remove and replace the shock absorber on Front Wheel Drive (FWD) and All-Wheel Drive (AWD) on Mercury Milan?A:The procedure for replacing shock absorbers starts with removing the upper arm of Front Wheel Drive (FWD) as well as All-Wheel Drive (AWD) MKZ and Fusion/Milan vehicles. Fasten the shock absorber compression by using tie straps until it maintains the compressed state. You must first take out the three shock absorber bracket bolts before extracting the shock absorber along with its upper bracket which you should discard with the bolts. Start by indexing the shock absorber along the bracket surface and then take out the shock absorber upper bolt, nut and bracket. The indexing mark on old shock absorbers needs to be transferred to new replacements before installation begins. You should carefully install the new shock absorber upper bolt and nut but do not make them fully tight yet. While tightening the upper shock absorber nut maintain the same angle between parts to avoid damage; position the index markings correctly until the shock absorber center line reaches 118 degrees from the bracket alignment tab. When installing the upper bolt on AWD vehicles tighten it to 90 Nm (66 lb-ft) while FWD vehicles require a torque of 103 Nm (76 lb-ft). Put the shock absorber together with the bracket before you install and tighten all three new bracket bolts to 40 Nm (30 lb-ft). Finally, reinstall the upper arm.
- Q: How to service and repair a shock absorber on Mercury Milan?A:Service and repair of the shock absorber begins with removing the upper arm before continuing. First discard the shock absorber lower bolt and flag nut before compressing the shock absorber with tie straps in its compressed state. Use caution to pull the shock absorber and bracket assembly along with its bolts through the space between trailing arm and coil spring. Proceed by marking the shock absorber to the bracket before removing and discarding the shock absorber upper bolt and nut. This action separates the shock absorber from the bracket. During the installation process transfer the recorded index mark from the original shock absorber onto the newly installed one. Install a new shock absorber upper bolt and nut to the bracket at first but keep it loose. Secure the shock absorber upper nut at 103 Nm (76 ft. lbs.) with precise alignment of the index marks to achieve an 118-degree angle from the bracket alignment tab center line. Place the shock absorber and bracket together before installing three bracket bolts which should get tightened to 48 Nm (35 ft. lbs.). Do not fully torque the shock absorber lower nut until reaching the bushing fastener tightening position on the suspension. Then install the new shock absorber lower bolt and flag nut while keeping the suspension at the proper position for torque tightening to 115 Nm (85 ft. lbs.). Finally, reinstall the upper arm.
Related Mercury Milan Parts
Mercury Milan Axle Beam
Mercury Milan Bump Stop
Mercury Milan Control Arm Bracket
Mercury Milan Front Cross-Member
Mercury Milan Rear Crossmember
Mercury Milan Strut Bearing
Mercury Milan Sway Bar Kit
Mercury Milan Sway Bar Link
Mercury Milan Sway Bar Link Bushing
Mercury Milan Trailing Arm
Mercury Milan Wheel Bearing
Mercury Milan Wheel Hub