How to service and repair the rear suspension wheel spindle on Mercury Milan?

You should start repair and maintenance of the rear suspension wheel spindle by taking off the wheel bearing and wheel hub assembly. three brake disc shield bolts should be removed then the brake disc shield can be taken off while maintaining a torque value of 23 Nm (17 lb-ft) during reinstallation. The procedure requires you to eliminate the wheel spindle bolts followed by taking out the wheel spindle. New bolts should be used with the new wheel spindle and both bolts need tightening to 140 Nm (103 lb-ft). To end the installation process follow the procedure for returning everything to its original position. The correct retention of vital components depends on the use of new equivalent-quality parts with same part numbers and following specified torque values when reassembling.

OEM Mercury Milan Spindle

Axle Spindle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Spindles found

View related parts
Mercury Milan Knuckle Assembly, Rear Passenger Side Part Number: 7E5Z-4A013-R
Product Specifications
- Other Name: Spindle; Suspension Knuckle Assembly, Rear Right
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Knuckle Assembly, Rear Driver Side Part Number: 7E5Z-4A013-L
Product Specifications
- Other Name: Spindle; Suspension Knuckle Assembly, Rear Left
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Spindle, Rear Passenger Side Part Number: 3M8Z-4A013-R
Product Specifications
- Other Name: Stub Axle, Rear Right
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Spindle, Rear Driver Side Part Number: 3M8Z-4A013-L
Product Specifications
- Other Name: Shaft; Stub Axle, Rear Left
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Milan Spindle

OEM Spindle boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Spindle with long life and a perfect fit. Come to our website and find genuine Mercury Milan parts. We keep a wide inventory of OEM Milan parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Milan Spindle Parts and Q&A

Knuckle Assembly, Rear Passenger Side
7E5Z-4A013-R
Q: How to service and repair the rear suspension wheel spindle on Mercury Milan?
A:
You should start repair and maintenance of the rear suspension wheel spindle by taking off the Wheel Bearing and Wheel Hub assembly. three brake disc shield bolts should be removed then the brake disc shield can be taken off while maintaining a torque value of 23 Nm (17 lb-ft) during reinstallation. The procedure requires you to eliminate the wheel spindle bolts followed by taking out the wheel spindle. New bolts should be used with the new wheel spindle and both bolts need tightening to 140 Nm (103 lb-ft). To end the installation process follow the procedure for returning everything to its original position. The correct retention of vital components depends on the use of new equivalent-quality parts with same part numbers and following specified torque values when reassembling.