Other Name: Filter Assembly - Engine Oil; Maintenance Kit; Spin-On Oil Filter; Coolant Filter; Filter Element
Replaces: 3M4Z-6744-AC
Fits the following Mercury Models:
Mariner | 2005-2010 | Base, Convenience, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Milan | 2006-2009 | Base, Premier | 4 Cyl 2.3 L GAS
Q: How to service the Variable Camshaft Timing (VCT) System Oil Filter on Mercury Mariner?
A: To change the VCT System Oil Filter, take off the VCT oil control solenoid, intake camshaft thrust cap oil filter plug and filter. Install the new filter with a tightening of up to 17 Nm (150 lb-in) and reverse the steps of removal to install the filter.
Q: How to service and repair the oil filter on Mercury Milan?
A: In order to service the oil filter, place the vehicle on neutral using a hoist. Unscrew the screws of the oil filter access cover, empty the oil supply and dispose the old filter and seals. Rinse down the new O-ring, put on the new filter and tighten to recommended torque. Install access cover (where necessary).