How to Service the Tail Pipe and Muffler on Mercury Sable?

Service of the muffler and tailpipe begins by fitting the vehicle onto a hoist in the neutral position. Position the vehicle slip on a hoist into neutral while you use a suitable jackstand to stabilize muffler and tailpipe. After that loosen the Torca® clamp nut. Reinstall the clamp while tightening it to 55 Nm (41 lb-ft). For muffler and tailpipe removal the isolators need careful attention to prevent breakage; applying soapy water will help detach the three isolators and extract the muffler and tailpipe assembly from the vehicle. The installation process requires the return of removal steps while replacing gaskets and nuts along with inspections for replacements of any damaged isolators. The engine start-up should be followed by exhaust leak testing.

OEM Mercury Sable Tail Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Tail Pipes found

View related parts
Mercury Sable Exhaust Pipe Part Number: 8G1Z-5G274-D
$9.83 MSRP: $13.95
You Save: $4.12 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Tail Pipe
- Replaced by: 7T4Z-9450-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Exhaust Pipe Part Number: 8G1Z-5G274-C
$9.83 MSRP: $13.95
You Save: $4.12 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Tail Pipe
- Replaced by: 7T4Z-9450-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Exhaust Pipe Part Number: 8G1Z-5G274-B
$9.83 MSRP: $13.95
You Save: $4.12 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Tail Pipe
- Replaced by: 7T4Z-9450-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Exhaust Pipe, Front Part Number: 9G1Z-5G274-D
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe, Front; Exhaust Y Pipe; Front Pipe
- Position: Front
- Replaces: 8G1Z-5G274-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Exhaust Pipe Part Number: 9G1Z-5G274-C
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Y Pipe
- Replaces: 8G1Z-5G274-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Exhaust Pipe Part Number: 9G1Z-5G274-B
Product Specifications
- Other Name: Pipe - Exhaust
- Replaces: 8G1Z-5G274-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Exhaust Pipe Part Number: 9G1Z-5G274-A
Product Specifications
- Other Name: Pipe - Exhaust; Tail Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS

Mercury Sable Tail Pipe

OEM Tail Pipe boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Tail Pipe with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Tail Pipe is an indispensable part whenever it comes to exhaust systems of Mercury Sable automobiles; they have always been famous for their sturdiness and efficiency. Specifically intended to discharge exhaust gases from the engine to the rear of the car, the Tail Pipe is a key in improving the efficiency and safety of the car. This tail pipe is made suitable for different Sable generation that includes five generations; these generation are accompanied by changes in design both in terms aesthetics as well as functionality. Tail Pipes can be straight or angled and some of them have chromed tips for aesthetic appeal of the car. The added features of having the exhaust outlets integrated through the rear bumper, which pioneered in mid of the late 1950s or early 1960s, is a clear representation of the Tail Pipe as an art of fashion with great functionality. Further, the methods used to fix the tail pipe to the trailer also vary between being welded or solely clamped on give or take the owner's preference. The Tail Pipe not only eases the sooth accumulation problem but also works in making the general flow of exhaust as ideal as possible within an automobile. The Tail Pipe is one of the outstanding car parts in the Market, particularly when it comes to durability and performance, this reflects the tradition of the Mercury car Company. Being a part of the Mercury Sable, the tail pipe does contribute a lot to the working capability of the car as well as to the facade that is expected to be seen in any Mercury automobile.

Mercury Sable Tail Pipe Parts and Q&A

Exhaust Pipe
9G1Z-5G274-C
Q: How to Service the Tail Pipe and Muffler on Mercury Sable?
A:
Service of the muffler and tailpipe begins by fitting the vehicle onto a hoist in the neutral position. Position the vehicle slip on a hoist into neutral while you use a suitable jackstand to stabilize muffler and tailpipe. After that loosen the Torca® clamp nut. Reinstall the clamp while tightening it to 55 Nm (41 lb-ft). For muffler and tailpipe removal the isolators need careful attention to prevent breakage; applying soapy water will help detach the three isolators and extract the muffler and tailpipe assembly from the vehicle. The installation process requires the return of removal steps while replacing gaskets and nuts along with inspections for replacements of any damaged isolators. The engine start-up should be followed by exhaust leak testing.