How to Service and Repair the Automatic Transmission Shift Knob on Mercury Mariner?

The automatic transmission shifter requires service and repair which should start with positioning the vehicle on a hoist with transmission set to neutral and shift knob placed in the (D) position. To start the procedure use a pry tool to lift the upper shift knob trim ring before taking out the top finish panel. Once you remove the set screw you can detach the knob section including wiring by pulling them directly upwards. The shifter straw must be removed by extracting it in a straight up position. Installation requires minor application of multi-purpose grease on the new shifter straw which should then be pushed downward into the bore. Place the overdrive cancel switch electrical connector wire harness through the bezel opening before installing the knob with its set screw. Reinstall the top finish panel and upper shift knob trim ring while paying attention to the orientation of the thick tab on the driver side front of the shifter before fitting it into place. Several times shift between park and drive positions while checking that the set screw does not produce excessive tightness.

How to service the Shift Knob for the selector lever on 2.3L and 3.0L engines on Mercury Milan?

The service operation for the 2.3L and 3.0L engine shift knob begins with moving the lower shift knob bezel downwards. The first step requires lifting the shift knob by removing its two bolts. Reinstall the shift knob by replacing it into position followed by tightening its two securing bolts. The service of the shift knob ends by positioning the lower shift knob bezel upward followed by a snap attachment.

OEM Mercury Shift Knob

Gear Shift Knobs

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Shift Knobs found

View related parts
Mercury Shift Knob Part Number: 9E5Z-7213-DA
$287.16 MSRP: $421.67
You Save: $134.51 (32%)
ADD TO CART
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
- Manufacturer Note: Less Button
Fits the following Mercury Models:
- Milan | 2010-2011 | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Knob, Passenger Side Part Number: 5M6Z-7213-AB
$44.46 MSRP: $61.51
You Save: $17.05 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly; Shift Knob
- Position: Passenger Side
- Replaces: 5M6Z-7213-AA
Fits the following Mercury Models:
- Mariner | 2006-2007 | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Shift Knob Part Number: BE5Z-7213-GA
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
Fits the following Mercury Models:
- Milan | 2011 | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Shift Knob Part Number: 9E5Z-7213-A
Product Specifications
- Other Name: Knob - Gear Change Lever; Manual Transmission Shift Knob; Automatic Transmission Selector Handle
Fits the following Mercury Models:
- Milan | 2010-2011 | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Shift Knob Part Number: 6E5Z-7213-D
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
- Manufacturer Note: Charcoal Black
- Replaces: 6E5Z-7213-C
Fits the following Mercury Models:
- Milan | 2006-2009 | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Shift Knob Part Number: 5F9Z-7213-B
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
- Replaces: 5F9Z-7213-AA
Fits the following Mercury Models:
- Montego | 2005-2007 | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Knob Part Number: E2TZ-7213-C
Product Specifications
- Other Name: Knob - Gear Change Lever; Shift Knob
Fits the following Mercury Models:
- Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Shift Knob Part Number: BE5Z-7213-KA
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
- Manufacturer Note: With +/- Button
Fits the following Mercury Models:
- Milan | 2011 | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Shift Knob Part Number: 9E5Z-7213-KA
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
- Manufacturer Note: Less Button
Fits the following Mercury Models:
- Milan | 2010 | Premier | 6 Cyl 3.0 L FLEX
View related parts
Mercury Shift Knob Part Number: 9E5Z-7213-BA
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
Fits the following Mercury Models:
- Milan | 2010 | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Shift Knob Part Number: 9E5Z-7213-AA
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
Fits the following Mercury Models:
- Milan | 2010 | Base, Premier | 4 Cyl 2.5 L GAS
View related parts
Mercury Shift Knob Part Number: 8A4Z-7213-D
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Selector Handle
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Shift Knob Part Number: 8A4Z-7213-C
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Selector Handle
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS

Mercury Shift Knob

If you own Mercury and want to keep it in top shape, choosing OEM Shift Knob is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Shift Knob at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Mercury Shift Knob Parts and Q&A

Knob, Passenger Side
5M6Z-7213-AB
Q: How to Service and Repair the Automatic Transmission Shift Knob on Mercury Mariner?
A:
The automatic transmission shifter requires service and repair which should start with positioning the vehicle on a hoist with transmission set to neutral and shift knob placed in the (D) position. To start the procedure use a pry tool to lift the upper shift knob trim ring before taking out the top finish panel. Once you remove the set screw you can detach the knob section including wiring by pulling them directly upwards. The shifter straw must be removed by extracting it in a straight up position. Installation requires minor application of multi-purpose grease on the new shifter straw which should then be pushed downward into the bore. Place the overdrive cancel switch electrical connector wire harness through the bezel opening before installing the knob with its set screw. Reinstall the top finish panel and upper shift knob trim ring while paying attention to the orientation of the thick tab on the driver side front of the shifter before fitting it into place. Several times shift between park and drive positions while checking that the set screw does not produce excessive tightness.
Shift Knob
6E5Z-7213-D
Q: How to service the Shift Knob for the selector lever on 2.3L and 3.0L engines on Mercury Milan?
A:
The service operation for the 2.3L and 3.0L engine shift knob begins with moving the lower shift knob bezel downwards. The first step requires lifting the shift knob by removing its two bolts. Reinstall the shift knob by replacing it into position followed by tightening its two securing bolts. The service of the shift knob ends by positioning the lower shift knob bezel upward followed by a snap attachment.