My Garage
Cart
Make sure this part fits

Ford H2MZ-18476-J
Heater Core

1989-2011 Ford H2MZ18476J

Customer Questions & Expert Answers (6)
Ford H2MZ-18476-J Heater Core
  • Part Description
    Heater Assembly - Less Radiator; HVAC Heater Core
  • Replaces
    HC-31
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Manufacturer Part NumberH2MZ-18476-J
    Part DescriptionHeater Assembly - Less Radiator; HVAC Heater Core
    Other NamesCore
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesHC-31
    ManufacturerFord
    SKUH2MZ-18476-J
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1989-1991 Ford Country SquireBase, LX8 Cyl 5.0 L GAS
    1992-2011 Ford Crown VictoriaBase, LWB, LX, LX Sport, Police Interceptor, S, Special Edition, Touring Sedan8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
    1989-1991 Ford LTD Crown VictoriaBase, LX, S8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
    1989-1997 Lincoln Town CarAnniversary, Base, Cartier, Cypress, Executive, Jack Nicklaus, Signature, Signature SE, Touring Edition, Tournament Edition8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
    1990-1991 Mercury Colony ParkGS, LS8 Cyl 5.0 L GAS
    1990-2011 Mercury Grand MarquisGS, GSL, Limited Edition, LS, LSE, Ultimate Edition8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
    2003-2004 Mercury MarauderBase8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this H2MZ-18476-J compatible with my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number H2MZ-18476-J fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the heater core on Mercury Grand Marquis? Posted by Customer
    A:
    An initial leak assessment through testing should happen prior to heater core removal for servicing purposes. You must start by uninstalling the plenum chamber then take out the screws which hold the heater core cover in place. The next step requires careful cutting of the seal which surrounds heater core inlet and outlet tubes before heater core extraction. Execute the installation by following the reverse steps of removal.
    Posted by FordPartsDeal Specialist
    Q:
    How should a heater core leak be tested and what is the removal procedure on Mercury Grand Marquis? Posted by Customer
    A:
    Vehicle inspection should verify a heater core leak before technicians extract the part from its current position. First detach the plenum chamber along with its screws then remove the heater core cover. Cut the seal above the heater core inlet and outlet tubes while being cautious about the removal of the heater core. Follow the opposite sequence of steps used for removal to install the component.
    Posted by FordPartsDeal Specialist
    Q:
    How should a heater core leak be tested and what is the removal procedure on Mercury Marauder? Posted by Customer
    A:
    Vehicle inspection should verify a heater core leak before technicians extract the part from its current position. First detach the plenum chamber along with its screws then remove the heater core cover. Cut the seal above the heater core inlet and outlet tubes while being cautious about the removal of the heater core. Follow the opposite sequence of steps used for removal to install the component.
    Posted by FordPartsDeal Specialist
    Q:
    What should be done for installation for the 2000 Ford Crown Victoria? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    How do you install the new heater core for the 2005 Mercury Grand Marquis? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford H2MZ-18476-J, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # H2MZ-18476-J Heater Core. It is sometimes referred to as Ford Heater Core. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford H2MZ18476J Heater Core. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery