My Garage
Cart
Make sure this part fits

Ford H2MZ-18476-P
Heater Core, Front

2002-2008 Ford H2MZ18476P

Customer Questions & Expert Answers (14)
Ford H2MZ-18476-P Heater Core, Front
  • Part Description
    Heater Assembly - Less Radiator; HVAC Heater Core, Front; HVAC Heater Core
  • Position
    Front
  • Replaces
    2L1Z-18476-AA, 2L1Z-18476-BA, HC-33
  • Manufacturer
    Ford
Make sure this part fits
$71.22 MSRP: $113.09
You Save: $41.87 (38%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Ford ExpeditionEddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2004-2008 Ford F-150FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
    2004 Ford F-150 HeritageSVT Lightning, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    2006-2008 Lincoln Mark LTBase8 Cyl 5.4 L GAS
    2002-2006 Lincoln NavigatorBase, Luxury, Ultimate8 Cyl 5.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this H2MZ-18476-P compatible with my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number H2MZ-18476-P fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the heater core on Lincoln Mark LT? Posted by Customer
    A:
    You must check for leaks on the heater core before removal when needs servicing. The service starts by removing both heater core and evaporator core housing while taking off dash panel seal from heater core tubes. The next step includes removing three screws from the temperature blend door actuator before putting it to the side. First remove the heater core cover through unscrewing its four screws before taking off the cover itself. The heater core component needs removal following the steps. The installation of the heater core seal needs proper placement to stop airflow from going around the heater core and reverse the removal procedures to finish installation.
    Posted by FordPartsDeal Specialist
    Q:
    What should be done after removing the screws from the temperature blend door actuator for the 2006 Ford Expedition? Posted by Customer
    A:
    Remove the actuator itself.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What should be done after ensuring safety for the 2002 Ford Expedition? Posted by Customer
    A:
    Partially drain the cooling system.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What should be done once the plenum chamber top is removed for the 2002 Ford Expedition? Posted by Customer
    A:
    Take out the blend door assembly from the case, followed by the heater core.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    How do you install the new heater core for the 2005 Ford Expedition? Posted by Customer
    A:
    Reverse the steps taken during removal.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What should be done after removing the A/C plenum demister adapter for the 2004 Ford F-150 Heritage? Posted by Customer
    A:
    Remove the screws securing the relay bracket and set it aside, then disconnect the vacuum line.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What is the first step to service the heater core if a leak is suspected for the 2007 Lincoln Mark LT? Posted by Customer
    A:
    Conduct a leak test before removal.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    How do you install the heater core for the 2004 Lincoln Navigator? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What is the next step after removing the plenum chamber for the 2003 Lincoln Navigator? Posted by Customer
    A:
    Remove the dash panel seal.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What should be done after removing the air conditioning and heater assembly for the 2002 Lincoln Navigator? Posted by Customer
    A:
    Remove the evaporator/heater core access cover by taking out the ten bolts.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What is the next step after removing the dash panel seal for the 2004 Ford Expedition? Posted by Customer
    A:
    Take out the screws securing the heater core cover.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What should be done after removing the auxiliary climate control housing for the 2006 Lincoln Navigator? Posted by Customer
    A:
    Take out the screws securing the evaporator/heater core access cover.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What should be done for installation for the 2002 Lincoln Navigator? Posted by Customer
    A:
    Reverse the removal procedure and lubricate the coolant hoses with MERPOL(R) meeting Ford specification ESE-M99B144-B or plain water if necessary.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Heater Core, Front H2MZ-18476-P Designed for Proper Fit and Performance

The Ford part H2MZ-18476-P Heater Core, Front as a genuine Ford Heater Core component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford H2MZ-18476-P Heater Core, Front is used with Ford F-150, Expedition, F-150 Heritage vehicles and Lincoln Navigator, Mark LT models. The original Ford part will bear the manufacturer part number: H2MZ-18476-P and where it is made at Ford. It has been specifically developed to fit the Front.
This component has dimensions of 9.1 x 13.3 x 11.9 inches and its weight is approximately 3.20 Pounds. The part H2MZ18476P is available in New condition while meeting the standards of the product rating. The Heater Assembly - Less Radiator; HVAC Heater Core, Front; HVAC Heater Core belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part H2MZ-18476-P replaces 2L1Z-18476-AA, 2L1Z-18476-BA, HC-33. The inventory reference for this item is SKU: H2MZ-18476-P. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.