2005 Lincoln LS Coil Springs, Control Arm, Shock Absorber, Steering Knuckle

Coil Springs, Control Arm, Shock Absorber, Steering Knuckle Installation and Repair Tips for 2005 Lincoln LS

• Q: Is a Spring Compressor Essential for Safe Disassembly of the Coil Springs and Shock Absorber Assembly on 2005 Lincoln LS?

  A: The shock absorber and spring assembly is under extreme load, so using a spring compressor during disassembly is crucial to avoid injury. All vehicles have gas-pressurized rear shock absorbers that extend unassisted. Suspension fasteners are critical; if replacement is needed, use a new part with the same number and adhere to torque values during reassembly.
• Q: How to Service and Repair a Lower Control Arm on 2005 Lincoln LS?

  A: To service and repair lower control arm, make sure that the vehicle is level and curb height is measured. Lift the car, take off the back brake disc and take out the shock absorber and the spring. Take out the lower arm and fit a new one, which joins up to the knuckle and screws up. Lastly, replace the brake disc and lower the car.
• Q: What precautions should be taken when disassembling the shock absorber and spring assembly on 2005 Lincoln LS?

  A: The shock absorber and spring assembly is under extreme load, so using a spring compressor during disassembly is crucial to avoid injury. All vehicles have gas-pressurized rear shock absorbers that extend unassisted. Replace any suspension fasteners with parts of the same number, adhering to torque values during reassembly.
• Q: How to Service and Repair the Front Steering Knuckle on 2005 Lincoln LS?

  A: Removal To service and repair the front wheel knuckle, the wheel bearing and hub should be removed. Disassemble the tie-rod end and lower control arm and hold the knuckle up using a jack stand. Do away with the knuckle and make sure that new nuts are installed. Before disconnecting components, be sure you have installed the tapered washer.