2008 Lincoln Navigator Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2008 Lincoln Navigator

• Q: What precautions should be taken when servicing the Air Bag Control Module to prevent accidental deployment and ensure proper installation on 2008 Lincoln Navigator?

  A: When servicing the Restraints Control Module (RCM), be careful and ensure that it is in its natural horizontal position to avoid accidental deployment of airbags. Check post-crash damage, change where it is required, and prevent memory savers. Install correctly and connectors have been securely attached. Full programmable module installation (PMI) and validate SRS functionality on repowering.
• Q: How to Service and Repair the Clock Spring Assembly on 2008 Lincoln Navigator?

  A: In order to fix Clock Spring assembly, center the tilt steering column and de-power the SRS. Take out the steering wheel and disconnect the Clock Spring. Installation of a Clock Spring should be done without the anti-rotation key, until the wheel is installed. Please make sure the centering is done carefully to prevent any damage and then fit in the airbag module and re-power SRS.
• Q: What precautions should be taken when handling a live side Airbag module to avoid serious personal injury on 2008 Lincoln Navigator?

  A: Point live side air bag modules and deployment doors/trim away from the body; never set with the deployment door facing down. Do not probe connectors. Damaged or exposed side air bag covers or modules must be replaced. Depower SRS, remove, inspect, replace damaged parts, reinstall, and repower.