FordParts
My Garage
My Account
Cart
OEM 2002 Mercury Cougar Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Catalytic Converters found
2002 Mercury Cougar Catalytic Converter Part Number: F8RZ-5E212-CC
Product Specifications- Other Name: Converter Assembly; Converter
- Item Weight: 13.70 Pounds
- Item Dimensions: 14.7 x 14.4 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8RZ-5E212-CC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Cougar Catalytic Converter Part Number: F8RZ-5E212-BH
Product Specifications- Other Name: Pipe Assembly; Exhaust Pipe; Front Pipe; Converter & Pipe
- Manufacturer Note: Converter asy
- Item Weight: 17.00 Pounds
- Item Dimensions: 14.3 x 14.8 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8RZ-5E212-BH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Converter Assembly
- Manufacturer Note: RH manifold and front converter asy.
- Position: Passenger Side
- Base No.: 5G232
- Item Weight: 10.20 Pounds
- Item Dimensions: 14.8 x 10.8 x 17.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S8Z-5G232-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Converter Assembly
- Manufacturer Note: LH manifold and front converter asy.
- Position: Driver Side
- Base No.: 5G232
- Item Weight: 13.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S8Z-5G232-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Cougar Catalytic Converter Part Number: 1S8Z-5E212-FA
Product Specifications- Other Name: Converter Assembly
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S8Z-5E212-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Cougar Catalytic Converter Part Number: 1S8Z-5E212-EA
Product Specifications- Other Name: Converter Assembly
- Item Weight: 12.00 Pounds
- Item Dimensions: 14.5 x 10.6 x 17.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S8Z-5E212-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Cougar Catalytic Converter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Mercury Cougar Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Mercury Cougar Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Mercury Cougar Catalytic Converter Parts Q&A
- Q: How to service the catalytic converter on a 2.0L engine on 2002 Mercury Cougar?A: Your service procedure for the Three Way Catalytic Converter (TWC) starts with disassembling the heat shield before removing the TWC from its manifold on vehicles using a 2.0L engine. Start the procedure by lifting up the vehicle before disconnecting the heated oxygen sensor electrical wiring through its unclipable connector. The hanger insulator must be separated before disconnecting the flange connection. The service specialist should begin by loosening both TWC nuts along with the bolt to successfully remove the TWC assembly and flexible pipe from the system. When installing the hanger insulators select only the specifications designed for your application because they have a special composition. Place the TWC with flexible pipe assembly correctly before installing the bolt and nut and tightening the bolts. Prolonged inspection should be conducted to check the hanger insulators for any sign of damage or fatigue before replacing them if needed. The exhaust hanger insulators need Merpol Lubricant D7AZ-19553-AA or equivalent product approved for Ford specification ESE-M99B144-B. After installing a new gasket and nuts, the flange joint should be loosely connected before lowering the vehicle. Apply jointing compound beyond the catalytic converter area but avoid this area itself for installation. Tighten the nuts properly after application. After installing the heat shield, repeat the procedure of raising and supporting the vehicle followed by tightening all nuts before connecting the heated oxygen sensor wiring and clipping the wiring in place before lowering the vehicle.