FordParts
My Garage
My Account
Cart
OEM 2002 Lincoln Blackwood A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Condenser found
2002 Lincoln Blackwood Condenser Part Number: EU2Z-19712-B
$298.84 MSRP: $413.42You Save: $114.58 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Condenser Assembly; A/C Condenser; Condenser A/C
- Replaces: YJ-474, 4L1Z-19712-AA
- Item Weight: 10.90 Pounds
- Item Dimensions: 22.9 x 4.3 x 46.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EU2Z-19712-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln Blackwood A/C Condenser
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln Blackwood A/C Condenser available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln Blackwood A/C Condenser as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Lincoln Blackwood A/C Condenser Parts Q&A
- Q: How to service the A/C Condenser on 2002 Lincoln Blackwood?A: Start service of the HVAC condenser by recovering all refrigerants first. Begin the service process by first removing the upper radiator sight shield and the bolts holding the radiator brackets in place while paying attention to the right-hand radiator bracket that serves as an example for the left-hand bracket. The condenser core A/C lines need their nuts removed before bracket bolts can be taken out where the right-hand bracket illustrates while the left-hand bracket follows the same procedure. The condenser core becomes ready for removal following all steps. To install the system follow the opposite removal steps and replace the O-rings with new ones lubricated in PAG oil before lubricating the system with required amounts of clean PAG oil. Replacement of a suction accumulator will be needed only after detecting physical evidence of system pollutants from an A/C compressor failure or suction accumulator damage or when a condenser core leak requires testing before removal.