Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
Position: Rear Outer
Replaces: E9JY-13466-A, F4ZZ-13466-A
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E5RY-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
LX, RS, S, SE, SEL, SES, Sony Limited Edition, ST, SVT, Titanium, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
Other Name: Center High Mount Stop Light Bulb; Rear Back Up Light Assembly; Tail Light Bulbs; Turn Signal Bulbs; Car Bulbs; Backup Lamp Bulb; Signal, Marker, Stop, High Mount Bulbs; Exterior Bulbs.
Position: Rear Inner
Replaces: E8GY-13466-B, F4BZ-13466-D
Base No.: 13466
Item Weight: 1.20 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E6DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
Electric, RS, S, SE, SEL, SES, ST, SVT, Titanium, ZX3, ZX5 | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, BATTERY EV (EV/BEV)
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
2004 Ford Focus Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Focus Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Focus Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2004 Ford Focus Headlight Bulb Parts Q&A
Q: How to Service a High-Intensity Discharge (HID) Headlight Bulb on 2004 Ford Focus?
A: The first step in servicing a high-intensity discharge (HID) headlamp bulb requires disconnecting the headlamp assembly electrical connector since there are high voltage hazards present. The service of HID headlamp bulbs starts with removal of the headlamp assembly followed by removal of the headlamp cover. First disconnect the electrical connector from the headlamp bulb ignitor before removing the ignitor from service. Carefully wear safety glasses and protective gloves while performing the procedure because failure to do so can result in personal injury so keep the retaining clamp open for the headlamp bulb. You should perform all bulb removals without contacting the glass surface on the headlamp bulb unit. Installation of the new bulb should be done by performing a reverse order of the removal steps.