FordParts
My Garage
My Account
Cart
OEM 2004 Ford Ranger A/C Accumulator
Accumulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Accumulator found
2004 Ford Ranger Dehydrator Part Number: XL2Z-19C836-AC
$63.87 MSRP: $105.09You Save: $41.22 (40%)Product Specifications- Other Name: Accumulator Assembly - Air Conditioning; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator
- Replaces: F87Z-19C836-AA
- Base No.: 19C836
- Item Weight: 3.60 Pounds
- Item Dimensions: 16.8 x 4.5 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL2Z-19C836-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Ford Ranger A/C Accumulator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Ranger A/C Accumulator available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Ranger A/C Accumulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2004 Ford Ranger A/C Accumulator Parts Q&A
- Q: How to Service the A/C Accumulator in the HVAC System on 2004 Ford Ranger?A: Starting the suction accumulator service in HVAC requires first recovering the refrigerant. Start by disconnecting the electrical connector of the A/C cycling switch while performing line removal with a dual-function wrench then discard used O-ring seals. The suction accumulator bracket holds in place through three screws which need removal for extraction of the suction accumulator itself. To install the suction accumulator follow the backward order of uninstallation then transfer the A/C cycling switch to the accumulator during a new installation process. The refrigerant system requires a proper amount of clean PAG refrigerant compressor oil F7AZ-19D589-DA (Motorcraft YN-12-C) or an equivalent which matches Ford specification WSH-M1C231-B along with new O-ring seals pre-lubricated in clean mineral oil. Evacuate the refrigerant system next after which you should perform leak tests followed by system charging.