How to Service and Repair the Blend Door Actuator on 2005 Ford Escape?

Service and repair work on the vacuum control motor requires beginning with disconnected vacuum supply hose from the motor position. The first step to service the vacuum control motor requires removal of the two retaining nut screws followed by rotating the motor out of its retaining arm. The installation procedure requires performing steps in the opposite order of what was done for removal.

OEM 2005 Ford Escape Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
2005 Ford Escape Motor Part Number: 8L8Z-19E616-E
$27.09 MSRP: $43.02
You Save: $15.93 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator
- Manufacturer Note: Pin #5 Is Not Used (No Connection)
- Replaced by: AL8Z-19E616-F
- Base No.: 19E616
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.2 x 6.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-19E616-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)

2005 Ford Escape Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Escape Blend Door Actuator Parts Q&A

Q: How to Service and Repair the Blend Door Actuator on 2005 Ford Escape?
A: Service and repair work on the vacuum control motor requires beginning with disconnected vacuum supply hose from the motor position. The first step to service the vacuum control motor requires removal of the two retaining nut screws followed by rotating the motor out of its retaining arm. The installation procedure requires performing steps in the opposite order of what was done for removal.