FordParts
My Garage
My Account
Cart
OEM 2005 Ford Freestar Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Intake Manifolds found
2005 Ford Freestar Intake Manifold, Upper Part Number: 7L3Z-9424-D
Product Specifications- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold, Upper; Intake Plenum
- Position: Upper
- Replaces: 5L3Z-9424-B
- Base No.: 9424A
- Item Weight: 17.60 Pounds
- Item Dimensions: 17.5 x 16.0 x 13.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-9424-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Freestar Intake Manifold Part Number: 6F2Z-9424-B
Product Specifications- Other Name: Manifold Assembly - Inlet
- Replaces: 3F2Z-9424-BA, 6F2Z-9424-AA
- Base No.: 9424A
- Item Weight: 18.00 Pounds
- Item Dimensions: 8.1 x 12.0 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-9424-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Freestar Intake Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestar Intake Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestar Intake Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Freestar Intake Manifold Parts Q&A
- Q: How to service and repair the lower intake manifold on 2005 Ford Freestar?A: Start servicing or repairing the lower intake manifold by taking out the coolant bypass tube along with the fuel injection supply manifold and then discarding both heater hoses connected to the lower intake manifold. First detach the upper radiator hose after releasing its clamp then uninstall the IMRC electrical connector. Keep track of the locations where eight short bolts and six long bolts are attached before disassembling their hardware and finally taking off the lower intake manifold. Discard the gaskets from both right and left-hand lower intake manifold together with the front and rear lower intake manifold seals. After treating all gasket areas with metal surface cleaner users should deploy new front and rear seals while applying silicone gasket and sealant to mounting points. You need to install the intake manifold gaskets after applying sealant to them but before positioning the lower intake manifold within four minutes. Place silicone gasket and sealant onto lower intake manifold mounting points before positioning the part into place while installing the six long bolts and then finishing with the eight short bolts. The lower intake manifold bolts need two-step tightening beginning at 5 Nm (44 inch lbs.) before proceeding to 10 Nm (89 inch lbs.). Reinstall the fuel injection supply manifold and coolant bypass tube after you connect the two heater hoses and upper radiator hose and the IMRC electrical connector. Place a fresh engine oil filter before installing it with half-turn pressure after the gasket reaches the oil filter housing and refill the engine with new engine oil.