FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Aviator A/C Expansion Valve
Air Conditioning Expansion Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Expansion Valves found
2005 Lincoln Aviator Expansion Valve, Rear Part Number: YF2Z-19849-AA
$25.50 MSRP: $34.71You Save: $9.21 (27%)Product Specifications- Other Name: Valve Assembly - Evaporative Emission; A/C Expansion Valve, Rear; Control Valve; Heater Control Valve; Valve Assembly - Evaporator Expansion; A/C Expansion Valve
- Manufacturer Note: Aux unit
- Position: Rear
- Replaces: XF2Z-19849-AA
- Base No.: 19849
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.6 x 1.6 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF2Z-19849-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Control Valve Part Number: 3L2Z-19849-BA
Product Specifications- Other Name: Valve Assembly - Evaporator Expansion
- Base No.: 19849
- Item Weight: 1.10 Pounds
- Item Dimensions: 6.1 x 2.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L2Z-19849-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator A/C Expansion Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator A/C Expansion Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator A/C Expansion Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Aviator A/C Expansion Valve Parts Q&A
- Q: How to Ensure Proper Functioning of the A/C Expansion Valve in a 2005 Lincoln Aviator?A: Begin service and repair of the A/C expansion valve by gathering refrigerant. Unplug the A/C expansion valve harness and take off the two A/C line tubings using their fittings to discard the O-ring seals. You will need to detach the A/C expansion valve manifold bolt to extract the A/C expansion valve while disposing of its O-ring seals. After taking apart the system, put in new lubricated O-ring seals that undergo mineral oil treatment. Load the refrigerant system with the proper amount of clean PAG-7 oil that matches Motorcraft YN-12-C specifications. Conclude by removing air from the system, then checking for leaks before adding refrigerant to the system. The scope of Refrigerant Compressor Oil F73Z-19577-AA (Motorcraft YN-9-A) is to lubricate O-ring seals in the R-134a refrigerant system but never apply it as an A/C compressor lubricant. You need to replace the receiver/drier only when the physical signs show contamination from a broken A/C compressor or receiver/drier damage.