My Garage
Cart

OEM 2005 Lincoln LS A/C Accumulator

Accumulator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Accumulator found

  • 2005 Lincoln LS A/C Accumulator - 6W4Z-19959-A
    2005 Lincoln LS A/C Accumulator Diagram - 6W4Z-19959-A
    View related parts
    Product Specifications
    • Other Name: Dehydrator Assembly; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Accumulator; Drier
    • Replaces: XW4Z-19959-BA
    • Base No.: 19959
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 6.2 x 4.6 x 4.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6W4Z-19959-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Lincoln LS Submodels:
    • Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2005 Lincoln LS A/C Accumulator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln LS A/C Accumulator available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln LS A/C Accumulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln LS A/C Accumulator Parts Q&A

  • Q: How to Service the A/C Accumulator on 2005 Lincoln LS?
    A: The servicing process starts with recovering all refrigerant from the A/C accumulator system. Start by extracting the air cleaner outlet tube and A/C accumulator fitting nut along with the discarding of O-ring seals. Install the A/C accumulator fitting nut with 8 Nm (71 lb-in) torque. The installer should remove and install the A/C accumulator bracket bolt at 7 Nm (62 lb-in) torque. Reverse the previous steps for installation of the A/C accumulator while utilizing new mineral oil-lubricated O-ring seals. The refrigerant system requires correct lubrication with clean PAG oil at the proper amount. The system completion requires evacuation then leak testing before charging with refrigerant.