OEM 2006 Ford Crown Victoria Vapor Canister

2006 Ford Crown Victoria Vapor Canister Parts Questions & Experts Answers

• Q: How to Service and Repair the Vapor Canister on 2006 Ford Crown Victoria?

  A: Service and repair procedures for the evaporative emission control canister must start with disconnecting the battery ground cable to reduce the danger of fuel vapor explosions or fires. Treatment of the installed fire suppression system requires depowering the entire unit. A hoisted vehicle needs to face NEUTRAL position. The service requires cutting connections for both the EVAP breather tube and EVAP vapor tube quick connect coupling. The service starts with removing the two EVAP canister retaining nuts and succeeding reinstallation by tightening them to 6 Nm (53 lb-in). Divide the EVAP canister vent solenoid electrical installation from the canister while drilling original rivets from their centers before adding new retaining rivets upon installation. Transportation of vehicles with fire suppression systems requires users to repower them after removing the EVAP canister. Recovery of the removal steps must be followed along with testing the system for leaks. The verification drive cycle for evaporative emission repair needs to be carried out to verify system functionality.