FordParts
My Garage
My Account
Cart
OEM 2006 Ford Crown Victoria Muffler
Exhaust Muffler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Mufflers found
Product Specifications- Other Name: Muffler Assembly - Front; Exhaust Muffler, Left; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Muffler
- Position: Front Driver Side
- Replaces: 4W7Z-5230-BB
- Base No.: 5230
- Item Weight: 24.60 Pounds
- Item Dimensions: 92.7 x 17.5 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Muffler Assembly - Front; Exhaust Muffler, Right; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Muffler
- Position: Front Passenger Side
- Base No.: 5230
- Item Weight: 24.40 Pounds
- Item Dimensions: 90.9 x 17.3 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Muffler Assembly - Front; Exhaust Muffler, Left; Direct-Fit Exhaust; Exhaust System Kit
- Position: Front Driver Side
- Replaces: 4W7Z-5230-BA
- Base No.: 5230
- Item Weight: 25.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Muffler Assembly - Centre And Rear; Exhaust Muffler, Right
- Position: Rear Passenger Side
- Replaces: 4W7Z-5230-DA, 5W7Z-5230-BA
- Base No.: 5230
- Item Weight: 22.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Crown Victoria Muffler
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Crown Victoria Muffler available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Crown Victoria Muffler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Crown Victoria Muffler Parts Q&A
- Q: How to Properly Service and Repair a Muffler and Tail Pipe on 2006 Ford Crown Victoria?A: Service of the muffler and tailpipe starts when the vehicle sits in neutral position on a hoist. Prior to hoisting or jacking or towing activities the air suspension electrical power needs to be disabled because unexpected air spring movement can shift the vehicle position. First disable the air suspension system through its switch. After the removal of the two nuts and clamp install them at 45 Nm (33 ft. lbs.) tightness. A suitable exhaust cutter tool helps cut the muffler from the tailpipe. Inspect the isolator before changing it if needed then detach the isolator to remove the tailpipe. The muffler replacement procedure should be executed again. The installation of new exhaust fasteners requires waiting until all components are ready before executing any tightness adjustments when possible. The final tightening of fasteners should reach 33 Nm (24 ft. lbs.) after performing even distribution through alternate tensioning per specification. The use of oil-based or grease-based lubricants on the isolators should be avoided since these products will deteriorate the rubber material which could cause it to separate from the exhaust hanger bracket during vehicle operation.