How to Service and Repair the A/C Hose from Condenser to Evaporator on 2006 Ford E-150?

Question

Accepted Answer

Service operations on the condenser to evaporator line begin with the procedure of recovering the refrigerant first. The process for 6.0L diesel vehicles requires you to disconnect the condenser outlet fitting by removing its nut and discarding the O-ring seal, then fasten it to 8 Nm (71 lb-in) torque rating. The service procedure for 4.6L, 5.4L and 6.8L engine vehicles starts with removing the engine air cleaner followed by the air cleaner outlet tube. An eight millimeter wrench must be applied to both sides of the fitting to avoid damage before disconnecting the condenser outlet fitting then replace O-ring seals before securing the new fitting with 39 Nm (29 lb-ft) torque. Users should disconnect the auxiliary evaporator inlet line fitting while discarding the O-ring seals by removing the four condenser-to-evaporator line bracket screws and the brackets on vehicles that feature auxiliary A/C. The new fitting requires tightening to 2 Nm (18 lb-in) after installation of the evaporator inlet fitting bracket screw. You must employ a wrench on both sides of the fitting before disconnecting the evaporator inlet while discarding the O-ring before installing the new joint at 18 Nm (13 lb-ft). Workers should remove the condenser-to-evaporator line and perform the reverse installation order while replacing O-ring seals and applying the right amount of clean PAG oil to the refrigerant system. As the last step, evacuate the system to eliminate air pressure and perform a leak test followed by a charging procedure of the A/C system.

OEM 2006 Ford E-150 A/C Hose

3 A/C Hoses found

2006 Ford E-150 Suction Line Part Number: 8C2Z-19867-B

2006 Ford E-150 Discharge Line Part Number: 8C3Z-19D850-A

2006 Ford E-150 Liquid Line Part Number: 6C2Z-19835-FC

2006 Ford E-150 A/C Hose

2006 Ford E-150 A/C Hose Parts Q&A

Related 2006 Ford E-150 Parts

Alternate Year Models