How to Service and Repair the A/C Hose from the Condenser to the Evaporator on Ford E-150?

The vehicle must be in neutral position on a hoist before starting condenser-to-evaporator line repair work. Removal of the engine air cleaner (ACL) alongside the ACL outlet tube must be performed on vehicles with 4.6L or 5.4L or 6.8L engines. Recover all refrigerant first before unfastening the condenser outlet fitting nut and disconnecting the fitting. Throw away the O-ring seal together with gasket seal and install the fitting with 15 Nm torque (133 lb-in). The process of reinstallation requires screwing down the evaporator inlet fitting bracket screw to 2 Nm (18 lb-in). Prevent damage on the air conditioning fitting by using a wrench on its sides to disconnect the evaporator inlet fitting before throwing out the O-ring seal and securing it to 18 Nm (159 lb-in) torque. During reinstallation for vehicles with auxiliary A/C drivers must secure the two condenser-to-evaporator line bracket screws to 3 Nm (27 lb-in) after which they should remove the condenser-to-evaporator line bracket nut. Users must detach the inlet and outlet connections of the auxiliary evaporator before discarding the O-ring seals. Screw the suction accumulator outlet line bracket with 18 lb-in of torque but tighten it to 2 Nm (18 lb-in) torque when reinstalling the part. The compressor suction line fitting nut requires removal followed by the disposal of the O-ring seal and gasket seal before readjusting it to 15 Nm (133 lb-in). Position the filler tube aside by tightening the two washer reservoir filler tube bolts to 9 Nm (80 lb-in) before installation. The oil filler tube bolt should also be tightened to 9 Nm (80 lb-in) during reinstallation. You should disconnect the vacuum supply line connector as well as detach the wire harness pin-type retainer before removing the cowl ground strap bolt which has to be tightened to 8 Nm (71 lb-in) when reinstalling. First disconnect the suction accumulator outlet fitting by removing the three wire harness screws and discard the O-ring seals at that time. Unclamp the brake booster vacuum hose and remove its attached vacuum hose. The condenser-to-evaporator line should be removed from the vehicle before installation where new gasket seals and O-ring seals must be utilized together with the appropriate amount of clean PAG oil for lubrication followed by evacuation and leak testing and system charging.

OEM Ford E-150 A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 A/C Hoses found

View related parts
Ford E-150 A/C Tube Part Number: CC2Z-19867-A
$105.05 MSRP: $176.36
You Save: $71.31 (41%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 6C2Z-19867-FA, XC2Z-19867-AA, YF-3260
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 A/C Line Part Number: CC2Z-19835-C
$25.92 MSRP: $41.82
You Save: $15.90 (39%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Line
- Replaces: XC2Z-19835-AA, 6C2Z-19835-HA, YF-3261
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Hose, Front Part Number: F7UZ-19C828-BA
$37.79 MSRP: $60.00
You Save: $22.21 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Vacuum; HVAC Vacuum Harness, Front; Vacuum Line; A/C Refrigerant Liquid Hose; A/C Hose
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Discharge Line Part Number: 3C2Z-19D850-AA
$326.66 MSRP: $451.91
You Save: $125.25 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To; A/C Refrigerant Liquid Hose; A/C Hose; Tube - Compressor To Manifold
- Manufacturer Note: FROM APR 29, 2003
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-150 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-150 Discharge Hose Part Number: GC2Z-19972-B
$162.34 MSRP: $257.78
You Save: $95.44 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; A/C Line; Discharge Line
- Replaces: GC2Z-19972-A, 7C2Z-19972-A, YF-3343
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Liquid Hose Part Number: CC2Z-19835-B
$79.75 MSRP: $133.89
You Save: $54.14 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: Condenser To Evaporator
- Replaces: 7C2Z-19835-B, YF-3347
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 A/C Line Part Number: CC2Z-19E558-B
$157.79 MSRP: $259.64
You Save: $101.85 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Hose
- Replaces: CC2Z-19E558-A, YF-44, 8C2Z-19E558-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 A/C Line, Front Part Number: CC2Z-19835-A
$112.04 MSRP: $184.35
You Save: $72.31 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; Suction Hose
- Manufacturer Note: Accumulator to compressor
- Position: Front
- Replaces: 7C2Z-19835-A, YF-3338
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 A/C Line Part Number: AC2Z-19835-A
$295.10 MSRP: $490.00
You Save: $194.90 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 8C2Z-19835-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Suction Line Part Number: 8C2Z-19867-B
$81.19 MSRP: $136.31
You Save: $55.12 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 6C2Z-19867-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-150 | Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Discharge Line Part Number: 8C3Z-19D850-A
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Replaces: 5C3Z-19D850-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Discharge Line Part Number: F7UZ-19D850-AB
Product Specifications
- Other Name: Tube - Compressor To; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-150 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-150 Discharge Line Part Number: 6C2Z-19D850-AB
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Replaces: 5C2Z-19D850-AB, 6C2Z-19D850-AA, 4C2Z-19D850-AA, YF-3111
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-150 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Liquid Line Part Number: 6C2Z-19835-FC
Product Specifications
- Other Name: Tube Assembly; A/C Accumulator Tube Outlet; A/C Refrigerant Liquid Hose; A/C Orifice Tube; A/C Hose; Tube
- Replaces: YF-3294, 6C2Z-19835-FA, 6C2Z-19835-FB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-150 | Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 A/C Line, Rear Center Part Number: 6C2Z-19835-EA
Product Specifications
- Other Name: Tube Assembly; A/C Pipe, Rear Center; A/C Refrigerant Liquid Hose; A/C Hose
- Position: Rear Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 A/C Line Part Number: 6C2Z-19835-AA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

Ford E-150 A/C Hose

OEM A/C Hose boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get A/C Hose with long life and a perfect fit. Come to our website and find genuine Ford E-150 parts. We keep a wide inventory of OEM E-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

This Ford E-150 A/C Hose is a crucial part of the air conditioning system of the Ford E-150 vehicles widely appreciated for its quality and durability. This A/C Hose helps in management of refrigerant and it assists in managing collection of heat from the cabin thus plays an important role in safety of the driver and or passenger. Primed to counter the pressures created by the refrigeration of the Freon gas, the A/C hose in the Ford E-150 has aluminum ends fitted into the crimping techniques to minimize leaks and buy more years into the life of the hose. Since its production started in 1957 to the various generations of E-150, this proves that this A/C Hose can fit into many styles, making it a popular choice among many Ford users. The Ford E-150 A/C Hose is an additional that not only optimizes the efficiency of the car through the air conditioning system but also gains additional safety, having climate control with less risk of failure. Regarding significant special features, it is important to include in the description of the Ford E-150 A/C Hose aspects such as build quality and material used, and they all work in a way that maintains the vehicle's additional quality and reliability while ensuring the appropriate climate conditions inside the cabin. As seen from the above highlights, Ford E-150 A/C Hose has delivered the work across the multiple E-150 models and can still be ranked as the central component to the vehicle's performance with drivers relying on Ford to tackle any driving weather with the comfort and safety of their car.

Ford E-150 A/C Hose Parts and Q&A

A/C Line
CC2Z-19835-C
Q: How to Service and Repair the A/C Hose from the Condenser to the Evaporator on Ford E-150?
A:
The vehicle must be in neutral position on a hoist before starting condenser-to-evaporator line repair work. Removal of the engine air cleaner (ACL) alongside the ACL outlet tube must be performed on vehicles with 4.6L or 5.4L or 6.8L engines. Recover all refrigerant first before unfastening the condenser outlet fitting nut and disconnecting the fitting. Throw away the O-ring seal together with gasket seal and install the fitting with 15 Nm torque (133 lb-in). The process of reinstallation requires screwing down the evaporator inlet fitting bracket screw to 2 Nm (18 lb-in). Prevent damage on the air conditioning fitting by using a wrench on its sides to disconnect the evaporator inlet fitting before throwing out the O-ring seal and securing it to 18 Nm (159 lb-in) torque. During reinstallation for vehicles with auxiliary A/C drivers must secure the two condenser-to-evaporator line bracket screws to 3 Nm (27 lb-in) after which they should remove the condenser-to-evaporator line bracket nut. Users must detach the inlet and outlet connections of the auxiliary evaporator before discarding the O-ring seals. Screw the suction accumulator outlet line bracket with 18 lb-in of torque but tighten it to 2 Nm (18 lb-in) torque when reinstalling the part. The compressor suction line fitting nut requires removal followed by the disposal of the O-ring seal and gasket seal before readjusting it to 15 Nm (133 lb-in). Position the filler tube aside by tightening the two washer reservoir filler tube bolts to 9 Nm (80 lb-in) before installation. The oil filler tube bolt should also be tightened to 9 Nm (80 lb-in) during reinstallation. You should disconnect the vacuum supply line connector as well as detach the wire harness pin-type retainer before removing the cowl ground strap bolt which has to be tightened to 8 Nm (71 lb-in) when reinstalling. First disconnect the suction accumulator outlet fitting by removing the three wire harness screws and discard the O-ring seals at that time. Unclamp the brake booster vacuum hose and remove its attached vacuum hose. The condenser-to-evaporator line should be removed from the vehicle before installation where new gasket seals and O-ring seals must be utilized together with the appropriate amount of clean PAG oil for lubrication followed by evacuation and leak testing and system charging.