FordParts
My Garage
My Account
Cart
OEM 2006 Ford E-250 Ignition Coil
Ignition Coil Resistor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Ignition Coils found
2006 Ford E-250 Ignition Coil, Black Part Number: 3L3Z-12029-BA
$49.28 MSRP: $81.09You Save: $31.81 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set; Coil
- Manufacturer Note: With Black Coil Boots
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 8.0 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-12029-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford E-250 Ignition Coil Part Number: 3W7Z-12029-AA
$55.58 MSRP: $91.45You Save: $35.87 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set; Coil
- Replaces: 1L2Z-12029-AA, 8W7Z-12029-A, DG-540
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.7 x 8.0 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-12029-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford E-250 Ignition Coil
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-250 Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-250 Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford E-250 Ignition Coil Parts Q&A
- Q: How to service the ignition coil-on-plug on 2006 Ford E-250?A: Service of the ignition coil-on-plug starts by first taking out both the engine cover along with the air cleaner assembly. After disconnecting the ignition coil electrical connector you must remove the bolt that secures the ignition coil. Tighten the bolt that secures the ignition coil to 6 Nm (53 lb-in) during new coil installation. Dielectric compound should be applied to coil boots after their installation is complete.