How to service and repair the rear bumper cover on 2007 Ford Escape?

Start the repair operations for the rear bumper cover by setting tape at two locations: the corners and below the headlamps to protect against paint chipping. Service technicians should handle right-hand outer bumper cover mount on Mariner vehicles near the exhaust pipe by performing complete removal with extreme care to maintain its integrity. The installation process begins with removing two rear bumper cover-to-splash shield bolts which should be torqued to 8 Nm (71 lb-in). Follow this procedure carefully for pin-type retainers on the outer rear bumper cover to avoid damaging the mounts since you must first take out both central and outer pin-type retainers then the six rear bumper cover screws. Follow by removing both liftgate alignment bumper bolts before disconnecting the two liftgate alignment bumpers, reinstall these components to 8 Nm (71 lb-in) torque. Disconnect the parking aid system electrical connector before starting the removal of the rear bumper cover when system equipment is available. Put the bumper cover back by aligning it properly into the bumper slides while performing the reverse steps of removal.

OEM 2007 Ford Escape Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Bumpers found

View related parts
2007 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-BAA
$171.75 MSRP: $265.05
You Save: $93.30 (36%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 11.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-BAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Escape Reinforcement, Front Part Number: 9L8Z-17757-A
$75.03 MSRP: $115.47
You Save: $40.44 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement Beam, Front; Bumper Cover Reinforcement, Front
- Position: Front
- Replaces: YL8Z-17757-AA, 5L8Z-17757-AA
- Base No.: 17757
- Item Weight: 8.30 Pounds
- Item Dimensions: 5.2 x 45.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-DAA
$195.39 MSRP: $304.35
You Save: $108.96 (36%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 9.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-DAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-CAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Manufacturer Note: Medium Dark Platinum
- Position: Front
- Base No.: 17D957
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-CAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Escape Bumper Cover, Rear Part Number: 5L8Z-17K835-AAA
$196.87 MSRP: $286.57
You Save: $89.70 (32%)
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 10.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17K835-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Escape Bumper Cover, Rear Part Number: 5L8Z-17K835-DAA
$174.92 MSRP: $254.62
You Save: $79.70 (32%)
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 12.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17K835-DAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-AAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 11.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- XLS | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2007 Ford Escape Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Escape Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Escape Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Escape Bumper Parts Q&A

Q: How to service and repair the rear bumper cover on 2007 Ford Escape?
A: Start the repair operations for the rear bumper cover by setting tape at two locations: the corners and below the headlamps to protect against paint chipping. Service technicians should handle right-hand outer bumper cover mount on Mariner vehicles near the exhaust pipe by performing complete removal with extreme care to maintain its integrity. The installation process begins with removing two rear bumper cover-to-splash shield bolts which should be torqued to 8 Nm (71 lb-in). Follow this procedure carefully for pin-type retainers on the outer rear bumper cover to avoid damaging the mounts since you must first take out both central and outer pin-type retainers then the six rear bumper cover screws. Follow by removing both liftgate alignment bumper bolts before disconnecting the two liftgate alignment bumpers, reinstall these components to 8 Nm (71 lb-in) torque. Disconnect the parking aid system electrical connector before starting the removal of the rear bumper cover when system equipment is available. Put the bumper cover back by aligning it properly into the bumper slides while performing the reverse steps of removal.