How to Service the A/C Accumulator in the HVAC System on Ford Freestar?

In order to service the HVAC suction accumulator, recapture the refrigerant initially. F73Z-19577-AA mineral oils are used with O-ring seals, and not with the A/C compressor. PEG oil F7AZ-19D589-DA is recommended to be used as compressor lubrication. Take out O-rings and put in fresh lubricated with clean mineral oil. Install parts in the reverse order then evacuate, leak test and charge the system.

OEM Ford Freestar A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Accumulator found

View related parts
Ford Freestar Accumulator Part Number: 6F2Z-19C836-AB
$66.88 MSRP: $92.52
You Save: $25.64 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly - Air Conditioning; A/C Accumulator; A/C Receiver Drier
- Replaces: 6F2Z-19C836-AA, YF-3155
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Freestar | Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

Ford Freestar A/C Accumulator

Welcome to our website where you can discover high-quality, genuine Ford Freestar A/C Accumulator. We offer an extensive inventory of OEM Ford Freestar A/C Accumulator at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Freestar A/C Accumulator Parts and Q&A

Accumulator
6F2Z-19C836-AB
Q: How to Service the A/C Accumulator in the HVAC System on Ford Freestar?
A: In order to service the HVAC suction accumulator, recapture the refrigerant initially. F73Z-19577-AA mineral oils are used with O-ring seals, and not with the A/C compressor. PEG oil F7AZ-19D589-DA is recommended to be used as compressor lubrication. Take out O-rings and put in fresh lubricated with clean mineral oil. Install parts in the reverse order then evacuate, leak test and charge the system.